SWITAWI
Doesn't Get Out Enough
Well Folks, the new build has begun, and once again I have the honor of bringing you the first pics. But first a short word from our intrepid builder...
"This is production trailer number 1. Some major changes in the frame. The first one was extremely strong, but had some rough points for me. This is smoother and stronger. 2 inches longer, which will allow for a small bumper in the back. Water tanks farther forward. It may be just a little heavier, but I never want to see a broken frame." - Skersfan
05/13 from the Blue Room... "All of my trailers are built on a jig. You are looking at the frame on the jig. I sent Old Sarge some off the jig. Tomorrow pick up the top bows being bent by All Pro, hope to have the walls on it by tomorrow nite with luck, if not will be shut down until after Overland Expo, as the prototype has been put through the paces for the last 8-9 months so she needs a good cleaning, touching up of the scratches, to make her presentable." - Skersfan
:safari-rig: More to come...
"This is production trailer number 1. Some major changes in the frame. The first one was extremely strong, but had some rough points for me. This is smoother and stronger. 2 inches longer, which will allow for a small bumper in the back. Water tanks farther forward. It may be just a little heavier, but I never want to see a broken frame." - Skersfan


05/13 from the Blue Room... "All of my trailers are built on a jig. You are looking at the frame on the jig. I sent Old Sarge some off the jig. Tomorrow pick up the top bows being bent by All Pro, hope to have the walls on it by tomorrow nite with luck, if not will be shut down until after Overland Expo, as the prototype has been put through the paces for the last 8-9 months so she needs a good cleaning, touching up of the scratches, to make her presentable." - Skersfan
:safari-rig: More to come...
Last edited: