Contact Matainance Bed (service bed, tool bed)

Service bed from M1031, currently has chrome extended fenders for dual wheels, but can be removed for single rear wheel usage. "light" all aluminum box is painted white on the outside and in 9/10 shape overall with very minimal scuffing etc. Has dual welding bottle mount and hose bracket (both removable)
Would make a very nice service truck, or could easily be restored into a 1031.
Will fit most full size trucks with a little work. Can easily haul on normal 16' utility/car trailer w/a few straps.

Located in North Little Rock AR.

$1600/trade

also have BDB (big 'dang' bumper),VERY heavy (est 400lbs) built as "work surface", w/receiver, 2 shackles, enough space to mount vise etc that can go w/box for extra $200

box/bumper were recently on a late model Ford 450

Please Email: undergroundmodshop
AT
gmail. com


Trades/Partial Trades:

4link setup/parts for f/R (going on 2.5t rockwells)
Coilovers
20" beadlocks on rockwell pattern
395 (or bigger 46-52") military tires
duce combat wheels or recenterd Hemtt wheels/parts
35-37" 16" tires
10k+ winch (or 8274)
Larger than 185 amp mig welder
good tubing notcher
shop type gantry crane
big air compressor
1.75" & 2" dies for Protool bender
1.5" DOM tubing and other steel
16'+ car hauling or utility trailer (bumper pull)
Waterbuffalo Trailer
M105 Trailer
D60 w/Drivers drop & 4.11/4.10 gears
and the usual Guns/ammo etc and whatever else you may have

more pics:

Nice big center section (large enough to sleep in) front right door opens into large center cavity:



"lots-o'-space":





Built military tough (with our tax dollars)

Where is this thing located? What is the cab to axle measurement?(or even the front of the box to the front of the wheel well???

Chase

That could be a very cool camper module... it's even aluminum :drool:

Well, I need more weight, I have dry pavement traction issues as it is...:smiley_drive:

But, maybe fitted out.... aluminum.... yeah... if it'll fit.......:victory:

Chase

chasespeed said:

Where is this thing located? What is the cab to axle measurement?(or even the front of the box to the front of the wheel well???

Chase

Click to expand...

Chase, it should fit "most" full size short bed. Center of wheel well to front of box is approx 55"

The last truck it was on was a long bed, but they had the welding tanks/hose mounted between the cab/box and it looked/worked great for them

the dual wheel fenders are removable if you've got a SRW truck

It is located in North Little Rock AR approx 4 miles off of I-40.

Thanks for the interest. I knew of the few places that I'd listed it that ya'll would be the ones to make me want to keep it LOL

ttt :smiley_drive: