Squarestream

Ditriz

New member
Thank you very much to the author of the topic for sharing photos and details on creating a camping truck. A friend of mine has the exact same brand of car, so he was very inspired by your experience. I have saved all the photos from your workflow, for some I used a photo enlarger to get a more detailed picture. I think that soon my friend and I will start to create a track according to your example.
 
Last edited:

dstefan

Well-known member
So how are you filling up the cab mounted diesel tank for the heater? Do you remove it or fill in place? I've been thinking about one and managing the tank, fuel, spillage, oder, etc is the stumbling block for us. Just curious how its working for you and how you manage it.
 

Andrew_S

Observer
Good stuff! I love the idea of hard sided pop ups, although I can say I had an old Hallmark with insulated soft sides that did remarkably well in extreme weather.

Seeing all these builds makes me want to finish the plans for mine.
Soft sided campers definitely have their place. I don't think I would want to deal with -20C or dropping in that kind of set up though.

I just discovered your DIY pop-top. Very impressed. It's refreshing to see people making what they want and getting out there. I'm subscribed to see your updates. I'm still deciding if I'm going to build my own or buy. Your can-do attitude shows through and is inspiring. Thank you for sharing.
If I could have bought something for my platform that met my needs I would have. It's a huge time commitment and honestly it's still not cheap. If you factor in your hours at a rate, holy smokes you could buy two of something else and maybe a truck too haha.

What are the dimensions of the truck and the camper, both opened and closed? How much room do you have inside to move around, sit, cook, etc., if the weather is crap and everything is battened down?

Do you get condensation inside in the cold weather? It would be a bit of work, but have you thought about a soft cover similar to the 'blankets' that are used to wrap DC fridges? This would further seal up the exterior and provide a bit of insulation or a radiant barrier. The same could be done on the inside if you did not want to panel the interior walls.

The truck bed is 7'8. The topper hangs roughly 36" out over cab. The camper closed stands only 32" tall, popped up it sits at 62".
No real interest in a cover. We've been in the camper down to -28C or -18F. It can definitely do more but it's really not much fun doing anything in temps passed that point. I'm torn on the interior, I would like to do something but can't make up my mind.


Just went through your build thread, impressive fabrication skills! Well done!
Thanks! it's really appreciated.

Super duper inspirational!

I import JDM's often, a 30 plus year bad habit, and a Hilux with a 1KD is in the plans for our next camper. Totally going to copy your design!

Sent from my SM-G981W using Tapatalk
Another guy on the forum did something very similar. I would love to see something like this on a hilux. Good luck with your build.

Thank you very much to the author of the topic for sharing photos and details on creating a camping truck. A friend of mine has the exact same brand of car, so he was very inspired by your experience. I have saved all the photos from your workflow, for some I used a photo enlarger to get a more detailed picture. I think that soon my friend and I will start to create a track according to your example.
Good luck with your and his project. Share some pics or post a build thread. I would love to see it.


So how are you filling up the cab mounted diesel tank for the heater? Do you remove it or fill in place? I've been thinking about one and managing the tank, fuel, spillage, oder, etc is the stumbling block for us. Just curious how its working for you and how you manage it.
I pull the diesel hose into the camper and pump it up. I gave this a lot thought and considered jerry cans, or an exterior fill port. Honestly it's just to easy to fill it in the camper and be done with it. I'll grab some paper towel for drips but that's all.
No odour at all, no spills either - that's saying something because this truck has honestly caught air on a number of occasions with a full diesel tank.
I had some serious reservations about having the tank inside, but I'm glad now that I did. It simplified removal of the camper drastically. I undo 4 clamps and one electrical connection. Everything leaves with the camper.

Sorry I don't get over to this section often. Here are a few updates.

Spent over 30 days in the camper during hunting season,

51599991377_dd1c4c4ac0_c.jpg


51601474179_77232b3ef6_c.jpg


51645446298_0f261c33fa_c.jpg


51644383262_ecb887db95_c.jpg


We've been making good progress on the camper striping
51644467762_bdc466f72d_c.jpg


Well over half the time was in freezing temps. The diesel heater and camper did awesome. We were always perfectly comfortable every night.
51646073475_44021b0368_c.jpg


51644383162_02f5893480_c.jpg



51645234446_193d7da118_c.jpg



Interior views
51644384637_0296a5547c_c.jpg



How's this for a breakfast spot
51645204271_7d2d8389c7_c.jpg
 

Andrew_S

Observer
I installed some baja dome lights inside, these were a much needed upgrade from headlamps and magnetic flashlights.
51660891569_9b117492a9_c.jpg


51659409992_a42411c756_c.jpg


51659410052_3b42b65368_c.jpg



Huge upgrade for us
51660891404_514fc8b7b9_c.jpg



Back at it,
51679727562_a420aa2f81_c.jpg


Nights like these I'm so happy with this set up.
51680525346_0d03a32340_c.jpg


51680533721_6fcf435cd2_c.jpg



This is the reason I didn't want anything more than a topper.
51681419480_601e4366ce_c.jpg


Try to pull one of these guys through a single door on a standard truck camper
51680526001_7575a080f1_c.jpg



Finished up the wiring on the camper and loomed it all.
Also installed some different struts and got the doors to open a bit more.
Small adjustments that made some huge day-day improvements.
51695730115_3354905118_c.jpg




I had a local machinist make me some custom badges after a buddy came up with a great name for the camper.
51712254773_d4a7e5be4e.jpg



51712650279_57beca29b4_c.jpg




51711982081_393ef83ac3_c.jpg


51884818969_2f2e8df13e_c.jpg


51898549058_8d4fca31e6_c.jpg
 

Andrew_S

Observer
We did some more proper winter camping,

51740398241_cc3c2359d9_c.jpg


51741050759_4ce6c73d2b_c.jpg



51741299185_3f01681b1f_c.jpg



51740631708_6962b93187_c.jpg




I finally found another window for the front wall
51796156799_cecf1674dc_c.jpg

51796517795_a37e084766_c.jpg


Not bad for $20. Testing to see if we wanted to full commit.
51795788911_d890034e30_c.jpg


51885144615_c6cfd60e9a_c.jpg


Got both the new front and old rear windows tinted to match the sides.
51884818884_8b421ff9bc_c.jpg


Fully committed
51884571023_14a25899d4_c.jpg


Absolutely stoked on how it looks and functions. So awesome to see 360* now.
51883528007_361ed6faec_c.jpg






Did a bunch of icefishing trips
51796159459_ce330b5cfd_c.jpg


51795788276_4f9f4c275b_c.jpg


51794839332_ccba312775_c.jpg


51798102543_e1aea43aa8_c.jpg
 

Andrew_S

Observer
Last modification was to redo the back window. I mounted it roughly 6" to high for no reason at all...
51898468731_389762db9c_c.jpg

I hope I never have to do this again. Trying to remove all the pieces once sika'd together is a very arduous task.
51898789699_3c0e6da6fb_c.jpg

Reworked the bracing,
51898455666_63345538f7_c.jpg

New sheet of 0.060"
51898456076_efb26b8cb3_c.jpg

All that's left is the window
51897497332_3a908d7505_c.jpg

51898456026_bedca212c0_c.jpg

Much better now....
51898455771_fd30f265bb_c.jpg

Can't wait to get back out and enjoy the latest round of improvements
51897497387_482a62e457_c.jpg

51898455436_f26633d29e_c.jpg

There are tons more adventure photos in the build thread linked below. I try to keep this limited to just camper pics.
 

AbleGuy

Officious Intermeddler
Great pictures (especially the winter shots…I felt cold just looking at all of that snow), and the camper is an amazing professional work product !

You two are absolutely rocking the outdoor adventure life….all four wheels chained up, man you’re really getting out there and doing it! Very inspirational posts…

The best part of your thread is this attitude:
“So I borrowed a radial arm saw from a buddy and bought a spool gun and just simply got started.”

Too many of us just keep spinning our wheels in dream land, in “some day” land. You just said, “what the he**” and jumped right in to the deep end…and did it!
 
  • Like
Reactions: SFP

SFP

Member
Love this thread and build

I have a 1981 GMC 2500 Camper Special that I so wanna do an Alaskan Camper type build (like yours) but go the way using something like what Total Composites offer (support local eh).

#LoveGMC

PS: Keep the posts and photos coming including the family/couple shots (besides just the build) - they inspire the rest of us.
 

Nailhead

Well-known member
Awesome build, Andrew! I'm guessing you have some fabrication in your background.

I've been contemplating a linear actuator system for my Alaskan, but I have a motivational problem replacing a fully-functioning hydraulic lift system.

You and your wife have my respect and admiration camping in the conditions you do. You couldn't pay me enough to camp in that deep freeze. I'm so over winter...
 

zoomad75

K5 Camper guy
Wow. Stumbled across this and zipped through the whole thread. Impressive is not a strong enough word on what you accomplished.

There aren’t many choices for the old S-series platform and what little there was don’t have the versatility yours does.

So you say it gained about 500ish pounds as far as the camper itself on the truck. Have you weighed it loaded down with gear for a run? I know with the Camper on my K5 the camper itself only added 2-300 pounds but it’s the ability to cram it full of gear.

How’s the little engine that could dealing with that weight and as I’ve found the aero drag? I know my 5.3 struggled on mountain grades and heavy winds with my setup. The. 8.1 now doesn’t care but fuel mileage is really more dependent on my heavy right foot.

I’m really impressed for sure. I’m going to share this with a buddy of mine that has been listing for an Alaskan but finding an 8footer non-cab over model is not easy and when you do find one it’s super expensive. He’s a hell of a fabricator too so I think he could totally do this.

Great work!
 

richxd87

Observer
Great build man, thanks for sharing the build and the updates! Can you share some more info on the lift actuators, how they were installed, and maybe the build that inspired you to use them?

Thanks
 

Andrew_S

Observer
So much awesome!
Love the badges.
Thanks, super stoked on how simple and nice they came out.

Great pictures (especially the winter shots…I felt cold just looking at all of that snow), and the camper is an amazing professional work product !

You two are absolutely rocking the outdoor adventure life….all four wheels chained up, man you’re really getting out there and doing it! Very inspirational posts…

The best part of your thread is this attitude:
“So I borrowed a radial arm saw from a buddy and bought a spool gun and just simply got started.”

Too many of us just keep spinning our wheels in dream land, in “some day” land. You just said, “what the he**” and jumped right in to the deep end…and did it!
All four chained up is like a tank and a lot of fun in the snow until it's not, then you're really stuck.
I'll give the wife credit for my motivation. We had talked about building a camper for a solid year and finally she kicked me in the shins enough times that I got off my butt and stopped talking. Thanks for the good words!


Love this thread and build

I have a 1981 GMC 2500 Camper Special that I so wanna do an Alaskan Camper type build (like yours) but go the way using something like what Total Composites offer (support local eh).

#LoveGMC

PS: Keep the posts and photos coming including the family/couple shots (besides just the build) - they inspire the rest of us.
Total composite's makes some awesome stuff.
I was a bit concerned with long term durability of composite panels, this camper really takes a ******** kicking on back roads.
Good luck with your build! If you're looking for more content, click the pic in my sig. Entire build is in there.


Awesome build, Andrew! I'm guessing you have some fabrication in your background.

I've been contemplating a linear actuator system for my Alaskan, but I have a motivational problem replacing a fully-functioning hydraulic lift system.

You and your wife have my respect and admiration camping in the conditions you do. You couldn't pay me enough to camp in that deep freeze. I'm so over winter...

Man thank you, your rig is such an awesome set up.
The actuators work great and are super light. If you're motivated to drop a ton of weight they would be an upgrade, otherwise I couldn't make a good argument for them.

Wow. Stumbled across this and zipped through the whole thread. Impressive is not a strong enough word on what you accomplished.

There aren’t many choices for the old S-series platform and what little there was don’t have the versatility yours does.

So you say it gained about 500ish pounds as far as the camper itself on the truck. Have you weighed it loaded down with gear for a run? I know with the Camper on my K5 the camper itself only added 2-300 pounds but it’s the ability to cram it full of gear.

How’s the little engine that could dealing with that weight and as I’ve found the aero drag? I know my 5.3 struggled on mountain grades and heavy winds with my setup. The. 8.1 now doesn’t care but fuel mileage is really more dependent on my heavy right foot.

I’m really impressed for sure. I’m going to share this with a buddy of mine that has been listing for an Alaskan but finding an 8footer non-cab over model is not easy and when you do find one it’s super expensive. He’s a hell of a fabricator too so I think he could totally do this.

Great work!
Bingo, very few offerings for these trucks and lots of compromises.
Yes about 500lbs loaded with battery, diesel tank full mattress & bedding.
Probably another 300 lbs in gear, really depends on the length of the trip & time of year. Shoot, 2 sets of tires chains is damn near 150 lbs, canoe is another 80lbs...
I built another engine for it, a 3.4 with a cam and some ported heads. It does ok but definitely not winning any races haha. Drag is surprisingly unnoticeable. Mostly the weight is the biggest downfall with a smaller v6. This is a very easy camper to build, literally a couple of a boxes. Keeping the gaps tight and finding the right gasketing was the hardest part. Thanks for the good words.

Great build man, thanks for sharing the build and the updates! Can you share some more info on the lift actuators, how they were installed, and maybe the build that inspired you to use them?

Thanks
The actuators are some cheapo fergelli units. Sorry I can't remember the military trailer build that inspired me. Actuators are as easy as it gets though. A couple rocker switches and 12v power. Thanks for the good words.


If anyone is looking for more elaboration/content, click the photo in my sig.

Here's a bunch more pics,

52028355019_4b38136176_c.jpg


52097455471_65a4403b01_c.jpg


set up in the bottom left
52097947205_63a4c66bb5_c.jpg


52097486218_fa12cb7e3e_c.jpg


52097695704_a883a5aeba_c.jpg


52097457196_403b615048_c.jpg


For scale next to a buddies ford
52097455696_1b85570c3b_c.jpg


52096436107_7b6306f4cf_c.jpg


52109074079_50231dafc1_c.jpg


52108866228_1060c00854_c.jpg


51935884836_c9690cbcf2_c.jpg


51935884796_951c858fcb_c.jpg


52022051482_a12543a9d8_c.jpg


52023340519_c45bbaa225_c.jpg


52023069826_39bff6fc0e_c.jpg


52023102208_690fe187f2_c.jpg


52023102473_0ce1d3a04e_c.jpg


52023340084_6001c449ee_c.jpg
 

Forum statistics

Threads
185,527
Messages
2,875,533
Members
224,922
Latest member
Randy Towles
Top