Hodakaguy
Adventurer
Without the camper, 4.88 gears and 91 OV Tune seeing 18-20mpg around town. With the camper about 16-18 depending on speed etc.
Hodakaguy
Hodakaguy's Overland Tacoma Builds - On to new adventures!
- Thread starter Hodakaguy
- Start date
Without the camper, 4.88 gears and 91 OV Tune seeing 18-20mpg around town. With the camper about 16-18 depending on speed etc.
Hodakaguy
Hodakaguy
Adventurer
Returned last week from a 1900 mile road trip through Yellowstone, camper and truck performed perfectly. Here's a few pics of the truck in different places along the route, I still need to go through the rest of the pictures of the trip when I get the time.
Outside of Jackson Hole WY....the lighting was very cool.
Lower Geyser Basin in Yellowstone.
Camping at Mammoth Hot Springs
Camp at Lewis and Clark Caverns Park
Heading down LOLO Pass.
I'll try and get some more pictures of the trip loaded up when I get a chance.
This past weekend my father and I went to Plain WA for the NW OverLand Rally....Sooooo many cool rigs there! Had a great time and got to meet a lot of great people. Plans were set in motion for an epic adventure while at the rally....More to come on that later
Will defiantly be going back next year.
Here's an overview of the rally from the Drone.
Where's Waldo....we are camping in this section, see the truck?
Home sweet home for a few nights.
The view out of the camper.
DasMule had their big rig at the show
There was a little of everything
Hodakaguy
Outside of Jackson Hole WY....the lighting was very cool.
Lower Geyser Basin in Yellowstone.
Camping at Mammoth Hot Springs
Camp at Lewis and Clark Caverns Park
Heading down LOLO Pass.
I'll try and get some more pictures of the trip loaded up when I get a chance.
This past weekend my father and I went to Plain WA for the NW OverLand Rally....Sooooo many cool rigs there! Had a great time and got to meet a lot of great people. Plans were set in motion for an epic adventure while at the rally....More to come on that later
Will defiantly be going back next year. Here's an overview of the rally from the Drone.
Where's Waldo....we are camping in this section, see the truck?
Home sweet home for a few nights.
The view out of the camper.
DasMule had their big rig at the show
There was a little of everything
Hodakaguy
So your in the bottom right hand section, two rows down from the black transport looking truck. The scary part is that I looked at the pic for 5s, no idea how I found that and that popped out like a sore thumb to me for some reason. Hmm, wonder if I should enter some of the Where's Waldo Competitions?
Whats my prize?
Whats my prize?
warrpath4x4
Adventurer
That car is awesome
Road Bull
New member
Hey
Hodakaguy,
What a fun time! This was my first year at the NWOR and it won't be my last. There are so many cool rigs and people there. We showed up as a fairly large group of nine rigs made up largely from 4Runner's of Washington folks and friends. We had a block of vehicles in row 8/9 when you came in. I did a bit of everything, trying to take it all in and managed to have a great time with a lot of cool people. I think next year I will try to walk around and get to know people and their cool rigs a bit better. I was the lucky first contestant for Mule's "Let's make a deal" game. I should have taken the Front Runner cutlery camp set, but instead I let it ride and ended up with $10 and a new wallet. That's okay, I used the new funds to buy some tacos for the gang. It's funny that I am looking at various forums and noticing all the different people that went to this event. You have a great looking Tacoma. I would seriously consider a Taco if my 4Runner needed replacing.
Hodakaguy,
What a fun time! This was my first year at the NWOR and it won't be my last. There are so many cool rigs and people there. We showed up as a fairly large group of nine rigs made up largely from 4Runner's of Washington folks and friends. We had a block of vehicles in row 8/9 when you came in. I did a bit of everything, trying to take it all in and managed to have a great time with a lot of cool people. I think next year I will try to walk around and get to know people and their cool rigs a bit better. I was the lucky first contestant for Mule's "Let's make a deal" game. I should have taken the Front Runner cutlery camp set, but instead I let it ride and ended up with $10 and a new wallet. That's okay, I used the new funds to buy some tacos for the gang. It's funny that I am looking at various forums and noticing all the different people that went to this event. You have a great looking Tacoma. I would seriously consider a Taco if my 4Runner needed replacing.
Attachments
Hodakaguy
Adventurer
Hodakaguy
Adventurer
Loving it, we had a Raven on our Tundra. The Flatbed models are really sweet, lots of room! They do weigh more though so keep that in mind when looking at trucks.
Hodakaguy
Hodakaguy
Adventurer
Been slammed lately...but time for a update.
At the NorthWest Overland Rally one of our goals was to check out campers for my fathers truck, we had been looking at the new GoFast camper and thinking about placing a order so it would be nice to see them in person. We were able to see all the major brands in one location which was great as it gave us the opportunity to study them and see how each one would fit our needs.
We liked the GoFast unit, light and simple. Construction looked really good and finish work was top notch. Canvas material is similar to what we have on the FWC and it’s been super waterproof. We live in the desert and the camper will be outside 365..the sun here tears things up fast. We both wondered how the composite roof will hold up over time to intense sun, things here die of sun!. Also not sure I like the light coming in through the composite translucent top, I could see times where I want it dark in the tent. Guess one could always make a internal light cover for the top. The tubular frame of the GoFast takes up room and makes the sides harder to insulate. Another thing I didn't care for was the short cab over, this makes for a short sleeping area and you will have to remove a cushion every time you want to drop back down to the truck bed when sleeping. No side window options on the GoFast.
We both really liked the Vagabond unit a lot as well, the construction is top notch and we both prefer the solid aluminum construction, insulated aluminum roof and less seals on the sides (I see this as being a lot more water/dust proof over time). They also have similar canvas material to the FWC which again we have found bullet proof in rain. We liked the longer extension over the cab and the ability to have a standing space with the bed deployed. The Drifter is also built out of thicker aluminum than the AT and was really rock solid! We also liked the side windows in the Drifter and they will be offering the Dometic windows. Without the tube frame of the GoFast the interior seems more roomy and offers more options for build outs. We really liked the one piece aluminum roof and it would be great for mounting solar or carrying my Kayaks.
The AT was great as well but higher $$ and the canvas material looked more like treated tent material than a true waterproof material like the others. I hung around twice to talk to the AT rep but never got the chance. The fit and finish of the AT was really good. They had the habitat on display as well but we both prefer the wedge design over the Habitat.
They all have their advantages and disadvantages, but the Drifter fits our needs the best.
And a couple of the campers.
AT
Vagabond
Gofast
We recently pulled the trigger and ordered a Vagabond Drifter camper for my fathers truck. This unit will remain on his truck year round unless we want to swap over the FWC for a longer trip. Can't wait to build it out, we will be adding insulation, lighting and heat. We will keep this camper very basic and light.
Next up...Awning swap. At the same rally we had the opportunity to look at the Alu-Cab 270 Deg Shadow Awning, we really liked the construction and that it can handle higher winds than our Batwing awning without the legs being deployed. Since we live in the desert and winds are very common this is an important feature for us. Our existing Batwing will hold up to wind as well but they recommend always using the legs and staking them down, I really prefer the free span option of the Alu-Cab. After returning home from the rally we sold the Batwing and purchased a Shadow unit.
The coverage is also slightly better with the Alu-Cab and it uses a more square shape, you can get a idea from these two drawings.
Batwing
Shadow
Batwing removed from the truck. Here you can see the factory FWC 1/4" stainless mounts for the Batwing, we will re-use these mounts for the Shadow and fabricate a 4th bracket as well for additional hinge support. The mounts go through the frame and have backing plates on the inside wall.
Here is a shot of the Batwing next to the Shadow awning. The shadow is a little larger and not as compact when collapsed.
Differences in mounting requirements. The Batwing uses an extruded rail along the back of the awning allowing for a lot of adjustment and easy installation. The Shadow has mounting holes on the internal framework and the bag completely encloses the mount, you need to pick your mounting holes then punch a hold through the bag for the bolts to pass through.
This is what allows the Shadow awning to remain free-spanning in higher winds (up to 20+ mph). The support arms on the Shadow are completely boxed for added strength and fully welded at the hinge assembly where the Batwing uses lighter open C-channel tubing and a extruded/riveted hinge assy. Again the Batwing works just fine and is slightly lighter and more compact but does need to be staked down with legs in higher winds.
Batwing
Shadow
With the help of 3 people we held the Shadow awning up in place and determined how far back the rear hinge needed to be. Once that was determined we started marking out the hole locations on the awning mounting brackets to match up to the FWC brackets. Since our awning brackets are already mounted on the camper we will modify the holes on the awning to match the brackets.
The existing brackets on the camper have a wider bolt pattern than the awning so a few new holes were in order.
The 3rd mounting bracket on the camper (rear most bracket) is located right where the hinge assembly starts in the awning, preventing me from drilling holes in this location. Since the bracket is already on the camper we will modify the bracket by adding a stainless extension and move the mounting location slightly forward for clearance.
Fabricating the extension out of 1/4" stainless to match the OEM mounts.
It will be welded onto the bracket at this location.
We will have to fabricate a custom 4th bracket that will directly support the hinge assembly on the awning, this will tie into the corner of the camper. More on this soon as progress happens.
Hodakaguy
At the NorthWest Overland Rally one of our goals was to check out campers for my fathers truck, we had been looking at the new GoFast camper and thinking about placing a order so it would be nice to see them in person. We were able to see all the major brands in one location which was great as it gave us the opportunity to study them and see how each one would fit our needs.
We liked the GoFast unit, light and simple. Construction looked really good and finish work was top notch. Canvas material is similar to what we have on the FWC and it’s been super waterproof. We live in the desert and the camper will be outside 365..the sun here tears things up fast. We both wondered how the composite roof will hold up over time to intense sun, things here die of sun!. Also not sure I like the light coming in through the composite translucent top, I could see times where I want it dark in the tent. Guess one could always make a internal light cover for the top. The tubular frame of the GoFast takes up room and makes the sides harder to insulate. Another thing I didn't care for was the short cab over, this makes for a short sleeping area and you will have to remove a cushion every time you want to drop back down to the truck bed when sleeping. No side window options on the GoFast.
We both really liked the Vagabond unit a lot as well, the construction is top notch and we both prefer the solid aluminum construction, insulated aluminum roof and less seals on the sides (I see this as being a lot more water/dust proof over time). They also have similar canvas material to the FWC which again we have found bullet proof in rain. We liked the longer extension over the cab and the ability to have a standing space with the bed deployed. The Drifter is also built out of thicker aluminum than the AT and was really rock solid! We also liked the side windows in the Drifter and they will be offering the Dometic windows. Without the tube frame of the GoFast the interior seems more roomy and offers more options for build outs. We really liked the one piece aluminum roof and it would be great for mounting solar or carrying my Kayaks.
The AT was great as well but higher $$ and the canvas material looked more like treated tent material than a true waterproof material like the others. I hung around twice to talk to the AT rep but never got the chance. The fit and finish of the AT was really good. They had the habitat on display as well but we both prefer the wedge design over the Habitat.
They all have their advantages and disadvantages, but the Drifter fits our needs the best.
And a couple of the campers.
AT
Vagabond
Gofast
We recently pulled the trigger and ordered a Vagabond Drifter camper for my fathers truck. This unit will remain on his truck year round unless we want to swap over the FWC for a longer trip. Can't wait to build it out, we will be adding insulation, lighting and heat. We will keep this camper very basic and light.
Next up...Awning swap. At the same rally we had the opportunity to look at the Alu-Cab 270 Deg Shadow Awning, we really liked the construction and that it can handle higher winds than our Batwing awning without the legs being deployed. Since we live in the desert and winds are very common this is an important feature for us. Our existing Batwing will hold up to wind as well but they recommend always using the legs and staking them down, I really prefer the free span option of the Alu-Cab. After returning home from the rally we sold the Batwing and purchased a Shadow unit.
The coverage is also slightly better with the Alu-Cab and it uses a more square shape, you can get a idea from these two drawings.
Batwing
Shadow
Batwing removed from the truck. Here you can see the factory FWC 1/4" stainless mounts for the Batwing, we will re-use these mounts for the Shadow and fabricate a 4th bracket as well for additional hinge support. The mounts go through the frame and have backing plates on the inside wall.
Here is a shot of the Batwing next to the Shadow awning. The shadow is a little larger and not as compact when collapsed.
Differences in mounting requirements. The Batwing uses an extruded rail along the back of the awning allowing for a lot of adjustment and easy installation. The Shadow has mounting holes on the internal framework and the bag completely encloses the mount, you need to pick your mounting holes then punch a hold through the bag for the bolts to pass through.
This is what allows the Shadow awning to remain free-spanning in higher winds (up to 20+ mph). The support arms on the Shadow are completely boxed for added strength and fully welded at the hinge assembly where the Batwing uses lighter open C-channel tubing and a extruded/riveted hinge assy. Again the Batwing works just fine and is slightly lighter and more compact but does need to be staked down with legs in higher winds.
Batwing
Shadow
With the help of 3 people we held the Shadow awning up in place and determined how far back the rear hinge needed to be. Once that was determined we started marking out the hole locations on the awning mounting brackets to match up to the FWC brackets. Since our awning brackets are already mounted on the camper we will modify the holes on the awning to match the brackets.
The existing brackets on the camper have a wider bolt pattern than the awning so a few new holes were in order.
The 3rd mounting bracket on the camper (rear most bracket) is located right where the hinge assembly starts in the awning, preventing me from drilling holes in this location. Since the bracket is already on the camper we will modify the bracket by adding a stainless extension and move the mounting location slightly forward for clearance.
Fabricating the extension out of 1/4" stainless to match the OEM mounts.
It will be welded onto the bracket at this location.
We will have to fabricate a custom 4th bracket that will directly support the hinge assembly on the awning, this will tie into the corner of the camper. More on this soon as progress happens.
Hodakaguy
Hodakaguy
Adventurer
A few more pics of the install.
Yesterday we welded the extension tab on the rear OEM awning mount.
Next up was to fabricate a stainless backing plate for the mount directly behind the hinge, this mount takes the majority of the load when the awning is extended so it needs to be very secure.
Supporting the weight of the awning while we fabricate the hinge support.
We were busy and I didn't go a great job at taking pictures, so now the awning is magically on the truck lol.
Here you can see the stainless steel hinge support. After looking at several different options we decided to support the rear of the awning off the Jack mount. This mount ended up being very low profile and offers a ton of support, the awning is rock solid when deployed.
I re-purposed the Batwing catch that was already on the camper, it is now the latch point for the Shadow tension strap.
I like this flip up leg on the center arm, it slopes the top so rain will run off and not pool up.
Not the best shots as the light was getting low but you can see the coverage of the shadow awning. Living in the desert the shade will be appreciated. It's amazing how solid this awning feels, just like their commercial I can pull myself up on the center arm and it barely moves!
I'll get some better pics soon.
Hodakaguy
Yesterday we welded the extension tab on the rear OEM awning mount.
Next up was to fabricate a stainless backing plate for the mount directly behind the hinge, this mount takes the majority of the load when the awning is extended so it needs to be very secure.
Supporting the weight of the awning while we fabricate the hinge support.
We were busy and I didn't go a great job at taking pictures, so now the awning is magically on the truck lol.
Here you can see the stainless steel hinge support. After looking at several different options we decided to support the rear of the awning off the Jack mount. This mount ended up being very low profile and offers a ton of support, the awning is rock solid when deployed.
I re-purposed the Batwing catch that was already on the camper, it is now the latch point for the Shadow tension strap.
I like this flip up leg on the center arm, it slopes the top so rain will run off and not pool up.
Not the best shots as the light was getting low but you can see the coverage of the shadow awning. Living in the desert the shade will be appreciated
. It's amazing how solid this awning feels, just like their commercial I can pull myself up on the center arm and it barely moves!
I'll get some better pics soon.
Hodakaguy
huntsonora
Explorer
Amazing build! Just perfect!
Hodakaguy
Adventurer
Time to get my fathers electrical finished up. I'll be installing the same setup in my fathers truck as I'm running in mine, Two NorthStar batteries and a ML-ACR for combining duties. The larger Group 31M battery on the drivers side will be the Aux battery and the smaller Group 35 battery on the passenger side will be the trucks starting battery.
First up install the SwitchPro assembly. Parts laid out and ready to assemble.
Going Together...
PowerTray and SwitchPro unit in the truck.....fit's like a glove!
Wiring up the SwitchPro.
Wiring up the 30" S8 light bar in the SSO Hybrid Bumper.
Labeling makes troubleshooting down the road sooooo much easier!
SwitchPro head unit installed in the SDHQ mount, clean and factory looking.
With the SwitchPro installed it's time to install the ML-ACR and wire up the two batteries. I'll be using 1/0 welding cable.
We welded studs onto the top of the battery tray to mount the ML-ACR. The ACR is held down via the front two studs, the rear studs are cut short for clearance and offer support from side to side movement.
Changing out the OEM battery end for one compatible with the new terminal.
Continued Below....
First up install the SwitchPro assembly. Parts laid out and ready to assemble.
Going Together...
PowerTray and SwitchPro unit in the truck.....fit's like a glove!
Wiring up the SwitchPro.
Wiring up the 30" S8 light bar in the SSO Hybrid Bumper.
Labeling makes troubleshooting down the road sooooo much easier!
SwitchPro head unit installed in the SDHQ mount, clean and factory looking.
With the SwitchPro installed it's time to install the ML-ACR and wire up the two batteries. I'll be using 1/0 welding cable.
We welded studs onto the top of the battery tray to mount the ML-ACR. The ACR is held down via the front two studs, the rear studs are cut short for clearance and offer support from side to side movement.
Changing out the OEM battery end for one compatible with the new terminal.
Continued Below....
Hodakaguy
Adventurer
Continued from above....
Extending the SwitchPro positive cable.
Extending the OEM Positive cable.
Used 1/0 Welding Cable to tie the two batteries together. Low profile 300A fuses used on each end of the positive cable for direct short protection.
And all wired up! I need to pick up some more white heat shrink tubing so I can finish labeling the rest of the wiring.
Hodakaguy
Extending the SwitchPro positive cable.
Extending the OEM Positive cable.
Used 1/0 Welding Cable to tie the two batteries together. Low profile 300A fuses used on each end of the positive cable for direct short protection.
And all wired up! I need to pick up some more white heat shrink tubing so I can finish labeling the rest of the wiring.
Hodakaguy