UJOR Build Thread

CaptainBuilt

Well-known member
For the beaches in Texas you may not even need 4x4 for the most part. Some soft spots here and there. I do not bother with the pressures, 45 psi on 305/65/18 and LSD rear and open front. I haven‘t been south of Matagorda, maybe farther south the sand is less compacted, but around Houston you will see a lot of 2wd Trafffic.

Mostly Bolivar is where I’ll be going. When you go over High Island bridge, and the road turns right, there’s a pull off where you can go miles down the beach and it’s empty.

I’m sure you know where I’m talking about.
 

Drizzt

Free Sarcasm Available
High top day!

80000414_2924359334249942_2307806474987896832_o.jpg

Do you just bolt through the glass with a backing plate on the inside? Or do you need additional structural support built up inside as well? I'm assuming the top has wood bonded into the ceiling.
 

ujoint

Supporting Sponsor
Do you just bolt through the glass with a backing plate on the inside? Or do you need additional structural support built up inside as well? I'm assuming the top has wood bonded into the ceiling.

We have them glass in an entire 1/2" sheet to the roof. And 1x6 around the sides. Roof rack gets thru bolted and glued with plates on the inside.
 

ujoint

Supporting Sponsor
Soft teardown today for this B190 that will be living in CO.

81371277_2944969698855572_1880556159312592896_o.jpg


For those of you interested in my Volvo build, here it is as of today! The engine/trans is final install after some chopping and hammer time for some of the tight areas. Happy with all of the clearances now! Time to plumb & wire it all up.

80316283_2944970672188808_2299414173316022272_o.jpg
 

jjohnny350

Adventurer
Soft teardown today for this B190 that will be living in CO.

81371277_2944969698855572_1880556159312592896_o.jpg


For those of you interested in my Volvo build, here it is as of today! The engine/trans is final install after some chopping and hammer time for some of the tight areas. Happy with all of the clearances now! Time to plumb & wire it all up.

80316283_2944970672188808_2299414173316022272_o.jpg
Dang Mane, That is going to be a rad wagon. Wow, really gets my wagon dreams flowing. Can't wait to see this thing. Thanks for the update, I love it.
 

Sigg

Member
For those of you interested in my Volvo build, here it is as of today! The engine/trans is final install after some chopping and hammer time for some of the tight areas. Happy with all of the clearances now! Time to plumb & wire it all up.

80316283_2944970672188808_2299414173316022272_o.jpg

Looking sooo good! That thing is gonna be one fun wagon!


Sent from my iPhone using Tapatalk
 

ujoint

Supporting Sponsor
Creampuff 1.0 is for sale

 

Forum statistics

Threads
185,538
Messages
2,875,653
Members
224,922
Latest member
Randy Towles
Top