Abitibi
Explorer
Hey guys
I've sold this kit to a good friend of mine last year and he changed his mind (he bought a salvaged Quigley van for dirt cheap and will transfer all the drivetrain to his bus). So I'm re-posting this on his behalf. He's a member here but not too savvy with computer. You can either reply on this thread which I'll monitor or send me a PM for his direct contact (email or phone). It's still in the crate ready to ship.
This is pretty much all the parts needed for a UJOR conversion including a 2004 rebuilt Dana 60 (BOM: 611337-2) stripped down and painted with Por15. Comes with new seals, new bearings, newish 4.10 gears and a new Eaton electric locker. I'm including new dust shields, new calipers and new TBM rotors and pads (those are sweet and recommended by Chris at UJOR).
I'm also including the following with the axle. Those parts are as is, consider them as free extras!
NV271 transfer case (not rebuilt but turns freely, feels good).
Tranny adapter.
Front driveshaft.
Front swaybar.
Upper u-bolt plate.
Warn premium locking hubs (a bit rusty but free & cleanable).
The rear driveshaft in the last pictures isn't included...
And a few other bits needed for the UJOR conversion. Obviously the axle and parts could be used for any other leafs conversions...
All the parts are in a crate and ready to ship. $2400 usd
These are all in Vancouver BC but willing to help with shipping.
Cheers
David
I've sold this kit to a good friend of mine last year and he changed his mind (he bought a salvaged Quigley van for dirt cheap and will transfer all the drivetrain to his bus). So I'm re-posting this on his behalf. He's a member here but not too savvy with computer. You can either reply on this thread which I'll monitor or send me a PM for his direct contact (email or phone). It's still in the crate ready to ship.
This is pretty much all the parts needed for a UJOR conversion including a 2004 rebuilt Dana 60 (BOM: 611337-2) stripped down and painted with Por15. Comes with new seals, new bearings, newish 4.10 gears and a new Eaton electric locker. I'm including new dust shields, new calipers and new TBM rotors and pads (those are sweet and recommended by Chris at UJOR).
I'm also including the following with the axle. Those parts are as is, consider them as free extras!
NV271 transfer case (not rebuilt but turns freely, feels good).
Tranny adapter.
Front driveshaft.
Front swaybar.
Upper u-bolt plate.
Warn premium locking hubs (a bit rusty but free & cleanable).
The rear driveshaft in the last pictures isn't included...
And a few other bits needed for the UJOR conversion. Obviously the axle and parts could be used for any other leafs conversions...
All the parts are in a crate and ready to ship. $2400 usd
These are all in Vancouver BC but willing to help with shipping.
Cheers
David
Last edited: