wheelie
Wheelie
1994 Tiger CX 2wd Chevy C2500 (Project Rig)
Originally a Colorado rig. I purchased this Tiger CX needing some work.
A second home purchase, a large scale remodel of second home, selling of our old home, A 1964 Scout, 1941 Willys MB Slat, an additional 1994 Tiger CX 4x4 Needing a full restoration, A 2006 Tiger CX 4x4 Duramax and more has kept me from finishing this rig.
I won't be able to start this Tiger remodel until next Spring/ Early summer.....….This is a great project for someone.
I am still debating selling this CX, Because I love to build them. I currently own three Tiger CX's in various states of remodel.
I am negotiable as to how someone would want to buy it.
I can supply 100% of the templates for the cabinetry needed if someone cares to make it identical to a Provan built Tiger CX.......using modern and high quality woods and materials.
DETAILS:
1994 Tiger CX C2500 (2wd) 112k (5.7 TBI 350ci. V8)
Orig CO Rig, never any rust…..
I will drive this rig anywhere in the country right now…..
I CAN INCLUDE:
* Cabinetry and wall templates.
* Original Cabinet doors and drawers (re-use (poor) Use as template)
* Ceiling (Meranti Marine Grade 6MM)
* Countertop- original
* Sink - (dual Stainless)
* Toilet (new Thetford in box.
* Cooktop - Atwood 3-burner propane
* Plumbing, fittings and water pump.
* Water Tank- 35 Gallons.
* Water Heater (6-gal)
* Furnace (suburban 20k btu)
* AC/DC Converter (WCFO or Parallax) your choice
* LED lighting (Dimmable Fixtures)
* Original Flexsteel folding couch from Provan (Blue/grey)
* misc new trim (extruded alloy and vinyl cover)
* Rooftop A/C Unit (currently deleted)
* Shore Power Cable
* Cabling for House Batteries
* Isolator for Batteries
* ANL Fuse Blocks for Batteries
* Clearance Lights (Bergman)
* Rear Tire Carrier (New and Old)
* Onan 2.8 (Currently Deleted) (Propane)
* and much much more.
RECENT WORK:
* fully closed cell foam insulated.
* Prepped and ready for interior assembly.
* Fantastic Fan Installed in Front Fan location.
* Rear A/C delete -Fan is a Fantastic Fan.)
* Dicor Fiberglass Restoration painted on the Top
* Added Chevy style Flares.
* Wheels and tires. (265/75/16 Toyo OC A/T) (Load Range D)
* Windows Reglazed with HEHR Seals.
* and more.
MECHANICAL:
fully tuned up - Runs and drives perfectly.
Had fuel system replaced.
Serp Belt and pulleys.
AC is Ice Cold
Heat is Hot.
fluids either flushed or replaced throughout.
TRUCK NEEDS:
* Cab and Lower Coach Paint (typical of mid 90's Chevys)
* PAINT- I have an estimate for $1500
* Never any Rust, mid 90's Chevys had issues with paint peeling. You could get away with replacing the font clip, but a paint job would make it look great!
COACH EXTERIOR NEEDS:
* Misc vinyl Screw Cover installed (provided)
* Caulking around windows and seams after paint.
ITEMS NEEDED FOR FINISHING:
* Shower pan - (Included, but I would get a new one)
* Bath Sink (From Provan)
Significant documentation, pics, measurements and more……
Asking $8500 for the Tiger CX as pictured. (without extras)
Asking $10,500 for nearly everything required to build a beautiful Tiger.
A qualified individual could easily have this built and ready for whatever their personal preference around $14-16.....If left in its current state.
This platform is 100% worthy for many swaps...IE. Solid Axle, 4x4, Cummins ISO Common Rail 4cyl, LS, and much more.
This Tiger project is best for a DIY type. Its not hard but will take a decent amount of labor to finish. Like I said, I have every piece that is needed for measuring.
I have three Tiger CX's now and have a wealth of knowledge. I am more than happy to help.
My original plan was to modify this Tiger CX to my liking.
4x4 Solid Axle Swap, Cummins 4 Cyl Common Rail ISO with Allison 5-sp.
95 + Chevy GMT-400 Dash Swap integrated into the Cummins ISO 170 Harness and more.
Rough plan was to have a sub 30k build with all those requirements……Not bad considering the prices of SMB's, Newer Tigers, Sprinters, NV's and more.
Along came the 2006 Tiger CX 4x4 2500HD Ext Cab Duramax LBZ- I bought the 06 Tiger with smoke damage from a wiring fiasco in July 2017 in Richmond, VA and have been working on that build for myself instead.
This 94 was put 2nd on the list.
I am 70% done with my 06 build and would like to enjoy it soon.
I am in No hurry, so fair offers only. I can show this Tiger Anytime.
I would be more than happy to deliver it as long as a return flight was negotiated.
Partial trades welcome for something that I can use.....
Thanks in advance,
Heath
Please message for my cell, I prefer to talk via the phone to start off with.
Prior Build of a 93 Dodge 1st Gen Cummins 5-sp.
Originally a Colorado rig. I purchased this Tiger CX needing some work.
A second home purchase, a large scale remodel of second home, selling of our old home, A 1964 Scout, 1941 Willys MB Slat, an additional 1994 Tiger CX 4x4 Needing a full restoration, A 2006 Tiger CX 4x4 Duramax and more has kept me from finishing this rig.
I won't be able to start this Tiger remodel until next Spring/ Early summer.....….This is a great project for someone.
I am still debating selling this CX, Because I love to build them. I currently own three Tiger CX's in various states of remodel.
I am negotiable as to how someone would want to buy it.
I can supply 100% of the templates for the cabinetry needed if someone cares to make it identical to a Provan built Tiger CX.......using modern and high quality woods and materials.
DETAILS:
1994 Tiger CX C2500 (2wd) 112k (5.7 TBI 350ci. V8)
Orig CO Rig, never any rust…..
I will drive this rig anywhere in the country right now…..
I CAN INCLUDE:
* Cabinetry and wall templates.
* Original Cabinet doors and drawers (re-use (poor) Use as template)
* Ceiling (Meranti Marine Grade 6MM)
* Countertop- original
* Sink - (dual Stainless)
* Toilet (new Thetford in box.
* Cooktop - Atwood 3-burner propane
* Plumbing, fittings and water pump.
* Water Tank- 35 Gallons.
* Water Heater (6-gal)
* Furnace (suburban 20k btu)
* AC/DC Converter (WCFO or Parallax) your choice
* LED lighting (Dimmable Fixtures)
* Original Flexsteel folding couch from Provan (Blue/grey)
* misc new trim (extruded alloy and vinyl cover)
* Rooftop A/C Unit (currently deleted)
* Shore Power Cable
* Cabling for House Batteries
* Isolator for Batteries
* ANL Fuse Blocks for Batteries
* Clearance Lights (Bergman)
* Rear Tire Carrier (New and Old)
* Onan 2.8 (Currently Deleted) (Propane)
* and much much more.
RECENT WORK:
* fully closed cell foam insulated.
* Prepped and ready for interior assembly.
* Fantastic Fan Installed in Front Fan location.
* Rear A/C delete -Fan is a Fantastic Fan.)
* Dicor Fiberglass Restoration painted on the Top
* Added Chevy style Flares.
* Wheels and tires. (265/75/16 Toyo OC A/T) (Load Range D)
* Windows Reglazed with HEHR Seals.
* and more.
MECHANICAL:
fully tuned up - Runs and drives perfectly.
Had fuel system replaced.
Serp Belt and pulleys.
AC is Ice Cold
Heat is Hot.
fluids either flushed or replaced throughout.
TRUCK NEEDS:
* Cab and Lower Coach Paint (typical of mid 90's Chevys)
* PAINT- I have an estimate for $1500
* Never any Rust, mid 90's Chevys had issues with paint peeling. You could get away with replacing the font clip, but a paint job would make it look great!
COACH EXTERIOR NEEDS:
* Misc vinyl Screw Cover installed (provided)
* Caulking around windows and seams after paint.
ITEMS NEEDED FOR FINISHING:
* Shower pan - (Included, but I would get a new one)
* Bath Sink (From Provan)
Significant documentation, pics, measurements and more……
Asking $8500 for the Tiger CX as pictured. (without extras)
Asking $10,500 for nearly everything required to build a beautiful Tiger.
A qualified individual could easily have this built and ready for whatever their personal preference around $14-16.....If left in its current state.
This platform is 100% worthy for many swaps...IE. Solid Axle, 4x4, Cummins ISO Common Rail 4cyl, LS, and much more.
This Tiger project is best for a DIY type. Its not hard but will take a decent amount of labor to finish. Like I said, I have every piece that is needed for measuring.
I have three Tiger CX's now and have a wealth of knowledge. I am more than happy to help.
My original plan was to modify this Tiger CX to my liking.
4x4 Solid Axle Swap, Cummins 4 Cyl Common Rail ISO with Allison 5-sp.
95 + Chevy GMT-400 Dash Swap integrated into the Cummins ISO 170 Harness and more.
Rough plan was to have a sub 30k build with all those requirements……Not bad considering the prices of SMB's, Newer Tigers, Sprinters, NV's and more.
Along came the 2006 Tiger CX 4x4 2500HD Ext Cab Duramax LBZ- I bought the 06 Tiger with smoke damage from a wiring fiasco in July 2017 in Richmond, VA and have been working on that build for myself instead.
This 94 was put 2nd on the list.
I am 70% done with my 06 build and would like to enjoy it soon.
I am in No hurry, so fair offers only. I can show this Tiger Anytime.
I would be more than happy to deliver it as long as a return flight was negotiated.
Partial trades welcome for something that I can use.....
Thanks in advance,
Heath
Please message for my cell, I prefer to talk via the phone to start off with.
Prior Build of a 93 Dodge 1st Gen Cummins 5-sp.
Last edited: