I was going to convert my 1997 4runner to manual hubs but decided to leave the ADD to make it a little easier when my wife drives it. I took everything you need to convert a 95.5-04 Tacoma or 96-02 4runner to manual hubs off a 96 Tacoma that had just under 170K miles. Aisin Hubs, Spindles, CV's, diff tube extension, etc. Everything is there, but dirty. One CV boot is cracked and the others should probably be replaced, I would do wheel bearings and ball joints while its out and clean it all up.
I'd like $350 plus shipping for everything.
Thanks
Jake
406 two four nine 8817
I'd like $350 plus shipping for everything.
Thanks
Jake
406 two four nine 8817