Sway bar question

[JCMatthews]

I have done some searching, but I need to work on my Google ****. I got under my truck tonight to investigate a clunk and found my right sway bar link had broken. I have lifted the front of my truck 2" and want to buy and extended link. Does anyone know where I can find one for an '05 Tundra?

 

[mtndude23]

http://www.lceperformance.com/Toyota-Tundra-Sequoia-Heavy-Duty-Sway-Bar-Links-p/2051255.htm

They aren't extended, but they are heavier duty so they won't snap off. The stock toyota ones are pretty wimpy I think. After breaking my second set of oem ones, I just took them and the bar all off. It still rides good, and not really anymore roll in the corners then before.

 

[JCMatthews]

I was thinking that I need extended ones, but the more I think about it, as long as the links are the same length the sway bar should work the same as stock. The bar will just be in a slightly different angle.

 

[JCMatthews]

Got underneath and realized both links were broken. Really not sure why. Went to AutoZone, they had then in stock for 14.88 so I picked up the two they had in stock and now things are good again.

 

[SubAlpine]

loose them. But watch out, your rear springs may dislocate..........

 

[JCMatthews]

My rear links are okay. It was my fronts that broke. I use my truck to haul heavy loads and tow trailers, so the sway bars will stay. Two weeks ago I towed a buddy's mini van on a trailer 70 miles to save him a tow bill. I can't afford not to have sway bars.