Starting a Gladiator Camper build
- Thread starter Willbilt
- Start date
You might want to look at the thread https://expeditionportal.com/forum/threads/gladiator-pop-up-pass-through-camper-build.227973/
Even if you do replace the bed, you might find some useful information in @Mules thread.
Even if you do replace the bed, you might find some useful information in @Mules thread.
It’s actually her daily ?? She likes what I likeHow's your wife feel about this project. I'm currently entrenched in a similar project.
Well that makes things smoother!
Louisd75
Adventurer
That's a good looking start for a solid little camper. You said it's her daily... hopefully you don't have to take the bed off and put it back on at the end of each work session
Roam.Wild
Active member
Maybe too lazy,,, proceeds to build an entire bed replacement camper. LOL You are for sure not lazy! Build is looking sweet so far!
Haha! True but this way I won’t have to do as much work to setup and tear down camp.
Mostly 1x1x1/16” square tubing. The main braces across the bottom are 1-1/8”x14 ga
I had a Bedrack with a rtt and I am trying to keep this lighter than that setup. Hopefully ?
Going to sheet it with 20 ga sheet metal. Which is 1.5 lbs a sq foot. Luan for the inside walls and foam board insulation.
I had a Bedrack with a rtt and I am trying to keep this lighter than that setup. Hopefully ?
Going to sheet it with 20 ga sheet metal. Which is 1.5 lbs a sq foot. Luan for the inside walls and foam board insulation.