(SOLD) 2018 Ram 2500 Diesel Prospector XL build w/ AT Overland Atlas Indiana


New member
With a new 5th gen Prospector XL on the way its now time to list my 4th gen Prospector XL build. I am the second owner of this truck, it was purchased new in January 2021 as leftover inventory by its original owner down in NC. The truck is still under factory warranty up until Jan 2024. The truck is a 2018 Ram 2500 6.7L Diesel, Big Horn package and just crossed 25,000 miles. Truck has sport seats, heated seats, a heated steering wheel, 8.4 uconnect, power driver’s seat. The truck's interior is clean and smoke-free. The stock truck's current value on KBB falls around 60k. I am asking 115K obo for the entire build and do not plan on separating the AT Atlas or other components.

Location: Fishers, Indiana

Year: 2018

Mileage: 25,000

Price: SOLD!!

-Ram HD 3'' dualsport suspension
-Highmark front and rear fender flares
-HD front bumper
-Katla 17 inch wheels (5 total)
-Front and rear diff covers
-Hydraulic assist steering kit
-Snorkel system
-Steel Prospector hood
-Intercooler Skid Plate

-Warn 16.5 winch
-C4RS synthetic winch line
-Factor 55 Fairlead
-Factor 55 Ultra Hook
-Baja Designs SAE fog light kit
-Baja Designs S8 20 inch amber light bar
-Baja Designs white LP9's (2)
-Baja Designs amber LP6's (2)
-Axis aluminum mounts for the lights
-ARB hose quick connect fitting

-PSC steering box and hydraulic ram
-Cari HD Front Track Bar
-CJC Offroad Boogie Rated front Bump Stops
-5 40x13.50 Milestar Patagonia MT tires with less than 10k miles

-Rigd Mega Swing Tire
-Metal Molle panel
-Front Runner drop down table
-camera relocation
-Full size spare

AT Overland Atlas:
-Paint matched
-Tern Overland Euro windows w/ privacy shades and bugscreens
- 170w SunPower E-Flex Panel w 15amp Victron MPPT 75/15 controller
-Maxxair Fan in roof
-LED lights inside on roof of topper and in D-pillars
-USB and AUX ports in rear D-pillar for charging
-Maxtrax mounts on roof
-Baja Designs S2 mounted on drivers side of topper
-AluCab 270 Shadow awning with LED lights mounted on pass side of topper
-Bull Finch quick connect shower/water port on drivers side of topper

-SPOD Bantam X w/ touchscreen in cab for lights and compressor
-Expedition Essentials RamPam mount on dash
-ARB Twin compressor
-Underbody led camping/area lights
-Odyssey PC1800 214 AH battery mounted in bed
-REDARC dual battery isolator
-NOCO 10 amp charger wired to battery
-Bluesea fuse panels wired to Odyssey battery for lights and USB's etc.
-ARB hose quick connect fitting in front bumper for easy access
-Front Runner 17 gallon water tank with pump
-National Luna fridge (I may keep the fridge)
-Custom enclosed box for water tank/battery/bench seat in bed

-Fridge module with top storage
-Double drawer module
-Bed mounting plate

-TS Performance Stryker Module
-Throttle pedal response booster (no more dead pedal feel)

Truck has been serviced at MB AUTO in Indianapolis, Mike and his brother are awesome and have a great facility. They work with AEV vehicles very often and know their way around these trucks

Recent service includes: Alignment, diff fluids and oil change

Recent Dealer service includes: Abs module replacement, thermostat replacement all under warranty.

This truck has been great to me but now with a little one on the way we will be heading in a different direction with my new truck. I’m sure there are a lot of modifications that are not listed above I will go through the truck and see what I had missed. I am not interested in any trades. The truck has its fair share of marks and light scratches from some of the tighter trails we have been on this is primarily on the wrap. The high Mark fender flares also has signs of wear from the brush of trails. The truck will be going in to get buffed and cleaned prior to sale, along with a fresh alignment. Any questions feel free to reach out.

Last edited:


Supporting Sponsor
Adam and his crew do amazing work!! Never a short cut taken. I used to see it regularly whilst he had it, and it is gorgeous!!


New member
I’d be interested in the AT for my 3500 if new owner doesn’t want it. You’re going to love the gen 4.5 HD truck…


New member
Adam and his crew do amazing work!! Never a short cut taken. I used to see it regularly whilst he had it, and it is gorgeous!!
Appreciate the comment! they do great work for sure. When we initially purchased it I think we spent 2 hours at his companies shop looking at all their other builds haha


New member
I’d be interested in the AT for my 3500 if new owner doesn’t want it. You’re going to love the gen 4.5 HD truck…
At the time really wanting to move everything together just due to how well the truck has been put together. The bed area houses a lot of the electrical, battery supply and goose gear system etc.

but if it comes down to it eventually I will keep you in mind brother


New member
got the truck back, opened up the Atlas and took plenty of photos and videos. It will not let me upload all of them so PM if interested.

SLC Tortfeasor

New member
What's the total height? I'm guessing it's higher than 7 feet? I want a rig like this but I want it to be able to fit in a standard 7 foot high garage.

Forum statistics

Latest member