Snow Peak Addiction

Just got back from my wood shop store and saw that they carry the light color BAMBOO, I used the darker one.

Watch "Easy Sink Idea For Sprinter Van - 5 Gallon Tank - Lithium Battery" on YouTube

Watch "The Best Portable Shower (DIY or Buy It From Me)" on YouTube

It wasn't my idea. I just modified it to my specs. I've attached 2 links.

(Pantherrvproducts.com) for the drain plug,, and the fold down faucet.
Oh and a collapsible bucket.
I run all of my lights from the Milwaukee platform so I run the water pump off of that as well.
 
Once dinner is done, we can transition some of the setup to a lounge area for firepit time:
a81f8cb8c0d99c73f2e7e3597b7d988e.jpg


f60c05a72325bb210fbd83e9e1b61f5b.jpg


Using the small bamboo inserts with the holes in the middle, you can use a tall leg and a lantern hanger for dim light. Normally I’d put the firepit out in front there... didn’t have it handy for this photo
d93d14030c916efb69cb7a0cc980153e.jpg


Packing up is the reverse. Put on 2U on the other, pop the legs in the straps which are hanging under the lower frame and wrap the straps to lock frames together.
f7ab1a084c0df6fd7e5f408b18270305.jpg


Legs in the YDR straps, frames bound together:
bdc67b214b8326e3cd9686552a6ca234.jpg


Loaded up. The SP large snow pit goes on top of the bag with the corner and side slide tables. Everything is the same dimension and stacks nicely. Strapped down with front runner “strachits” to airtrack affixed to my drawer tops:
622ddc2b24de850f8ebab7b4b77f2ac1.jpg
That is a great setup.
How do you like the frontrunner chairs for the SP table?
Where do you get the YDR straps
 

Chris Boyd

Explorer
That is a great setup.
How do you like the frontrunner chairs for the SP table?
Where do you get the YDR straps

Thanks Chris. Will better soon with some running water thanks to your inspiration!

I like the FR chairs good enough. They pack down into my drawers, so I always have them. Some times I feel like they don’t have enough back recline, and then I just go jump in the hammock

I got my YDR strap from the man (@yumadesertrat) himself! I have a couple of sets for all my kit. I’m not sure he’s making them these days, but it’s always worth a PM to see.
 
Thanks Chris. Will better soon with some running water thanks to your inspiration!

I like the FR chairs good enough. They pack down into my drawers, so I always have them. Some times I feel like they don’t have enough back recline, and then I just go jump in the hammock

I got my YDR strap from the man (@yumadesertrat) himself! I have a couple of sets for all my kit. I’m not sure he’s making them these days, but it’s always worth a PM to see.
I've sent Mr. Desert a few messages, but no reply. I'm new to chiming into this thread. I've just been embarrassed of my addiction. But I am here and proud to share....... not sure if I know how to send a private message.

I built my drawer system but it is shy of a 1/4" so the SnowPeak chairs won't fit. I run the low style kelty chair with the SP 600 leg for my littles, but now it's time for an adult size chair.

About your running water system it was super simple to build, you will be happy.
 
Some more closer images of my modifications
 

Attachments

  • 20210328_114137.jpg
    20210328_114137.jpg
    1.1 MB · Views: 64
  • 20210328_114059.jpg
    20210328_114059.jpg
    955.7 KB · Views: 65
  • 20210328_113928.jpg
    20210328_113928.jpg
    1.1 MB · Views: 64
  • 20210328_113730.jpg
    20210328_113730.jpg
    1.1 MB · Views: 64
  • 20210328_113741.jpg
    20210328_113741.jpg
    1.2 MB · Views: 63
  • 20210328_114347.jpg
    20210328_114347.jpg
    1.2 MB · Views: 67
  • 20210328_115752.jpg
    20210328_115752.jpg
    3.5 MB · Views: 65
I got the 2U frame because the magam grill & D.Burner didn't fit the the 4U frame. & I thought that the grill would fit in the 2U frame ..... but it didn't. So I should of bought the 3U frame.
Maybe I could chop and weld the frames into each other to add 4" more.? and but the 3U frame.

Wait I should talk to my sponsor before I fall again.
I will pour out my cup of Kool-aid.
 

Attachments

  • 20200531_144557.jpg
    20200531_144557.jpg
    3 MB · Views: 65

screwball48

Explorer
I got the 2U frame because the magam grill & D.Burner didn't fit the the 4U frame. & I thought that the grill would fit in the 2U frame ..... but it didn't. So I should of bought the 3U frame.
Maybe I could chop and weld the frames into each other to add 4" more. and but the 3U frame.

Wait I should talk to my sponsor before I fall again.
I will pour out my cup of Kool-aid.

Chop a 2U! Hush your blasphemy!
Also any details on that “cart” in your photo? It appears to have an awning mounted to it.


Sent from my iPad using Tapatalk
 
I made it 8years ago.
I will add some photos

But yes the awning was one of the 1st at that time. It was a replica from Hannibal awnings.
Now a days you can get an awning anywhere.
I made the awning frame and canvas myself.
I created the wagon so you can stand on top of it for kids sport videoing.
The awning was a must out on the feild, like, river, or beach.

I've incorporated the S.P. extension table to it.
 

Forum statistics

Threads
185,541
Messages
2,875,678
Members
224,922
Latest member
Randy Towles
Top