Snow Peak Addiction

[Yuman Desert Rat]

If anyone in the eastern NC area is interested in buying some IGT gear, Im thinking about selling off some extra kit. PM me if interested?

 

[Yuman Desert Rat]

The aluminum tape trick on the adjustable legs worked like a champ. I did take some fine sandpaper to the inside of the outter leg-tube to "deburr" the detent holes. After some tweaking the wobble is almost nonexistent.

 

[Minor Threat]

Russ, your IGT 4 windscreen case is finished and on its way. It came out so nice I wanted to keep it... lol its better than the one I made for myself!!

Looks good! Thanks!

 

[tothetrail]

The aluminum tape trick on the adjustable legs worked like a champ. I did take some fine sandpaper to the inside of the outter leg-tube to "deburr" the detent holes. After some tweaking the wobble is almost nonexistent.

Thanks for responding. I played around a bit with different amounts and layers, but it would eventually catch and peel off the outer layer while extending them out. Both rolls of Al tape I have are from past projects, so I may just buy a new roll and see if the adhesive might have been too old. I'll have to work on the inside of the detent holes, as that may be what is catching the tape. Also going to try applying it to the outside of the inner leg, instead of the inside of the outer leg.

 

[Lennart]

Russ, your IGT 4 windscreen case is finished and on its way. It came out so nice I wanted to keep it... lol its better than the one I made for myself!!

Stunning work as usual Yuman Desert Rat

 

[Yuman Desert Rat]

Stunning work as usual Yuman Desert Rat

Lennart, thanks brother! I've been away from the machine for far too long. It felt good to create again. Even though my arm is killing me from hours of continuous work.. lol

I know this is probably sacrilegious, but I just finished this case last night. Its for my PDW Knife/cutting board set. Its like the Snow Peak variant, but on steroids with 2 knives

 

[Yuman Desert Rat]

Thanks for responding. I played around a bit with different amounts and layers, but it would eventually catch and peel off the outer layer while extending them out. Both rolls of Al tape I have are from past projects, so I may just buy a new roll and see if the adhesive might have been too old. I'll have to work on the inside of the detent holes, as that may be what is catching the tape. Also going to try applying it to the outside of the inner leg, instead of the inside of the outer leg.

I only needed 1 layer with no overlap. It took a while. The lower hole us the hard part. Im going to do some further tinkering (when I get a chance) to perfect the process...

 

[Yuman Desert Rat]

90 second video of some of Snow Peak’s newest gear. It’s not a thorough review or anything. I was filming my trip to Odaiba and this was a small part of that trip. Gave me a chance to try out my new Osmo Pocket video camera.



Sent from my iPad using Tapatalk Pro

Isnt it against forum rules to post up pornographic videos ??? LMFAO!! ??

 

[cactusjk]

Lennart, thanks brother! I've been away from the machine for far too long. It felt good to create again. Even though my arm is killing me from hours of continuous work.. lol

I know this is probably sacrilegious, but I just finished this case last night. Its for my PDW Knife/cutting board set. Its like the Snow Peak variant, but on steroids with 2 knives

Should have my 4U windscreen soon and will probably need a case!

 

[Yuman Desert Rat]

Should have my 4U windscreen soon and will probably need a case!

You just let me know, brother!

 

[cactusjk]

Absolutely!

 

[Riptide]

Also going to try applying it to the outside of the inner leg, instead of the inside of the outer leg.

I actually haven't tried this yet; just got some tape a few days ago. But it seems to me trying to fit the tape on the inside of the outer leg is a heck of alot harder than putting it on the outside of the inner leg. Thanks for the heads up on filing the detent holes...

 

[Minor Threat]

Russ, your IGT 4 windscreen case is finished and on its way. It came out so nice I wanted to keep it... lol its better than the one I made for myself!!

I received my Desert Rat Designs IGT 4 windscreen case today. I’ve gotta say that I’m very impressed - top quality work! I highly recommended purchasing some Yuman Desert Rat ?? gear.

 

[cactusjk]

Another plug for Desert Rat Designs! Custom, unique and functional SP storage solutions.

 

[Yuman Desert Rat]

I received my Desert Rat Designs IGT 4 windscreen case today. I’ve gotta say that I’m very impressed - top quality work! I highly recommended purchasing some Yuman Desert Rat ?? gear.

Thanks Russ! Much appreciated!! Let me know when you need anything else. Enjoy!