dreadlocks
Well-known member
its not tied into the internals, its wired directly up to the PD output.. the idea being get it as close to the source as possible so its accurate and not suffering from voltage drop.
affirmative
also updated my diagram
…………….
just finished this project
affirmative
also updated my diagram
yes I use a couple of these: https://www.amazon.com/gp/product/B0019ZBTV4/ . You can see em both in this pic with the red caps on em. its now moved to the other post on the BP, this is my first wiring setup that didnt shut off the charger when it was full