RedRunner's 2016 SR5 Build and Adventure Thread

[RedRunner87]

Labor Day Bunce School Road run

51430224203_9122e72097_o by Red Runner, on Flickr Labor Day 001 by Red Runner, on Flickr
51430224353_cafd444f95_o by Red Runner, on Flickr
51430224348_cdf8c9103b_o by Red Runner, on Flickr
51430728804_7072f9aa30_o by Red Runner, on Flickr
Labor Day 006 by Red Runner, on Flickr
Labor Day 007 by Red Runner, on Flickr
51429226677_821320eb54_o by Red Runner, on Flickr
Labor Day 013 by Red Runner, on Flickr

This is where we ended it. My buddy was comfortable pushing his Runner up this section.
51430957890_5ee1dc79b1_o by Red Runner, on Flickr
51430957885_04ee3108ca_o by Red Runner, on Flickr
51429987461_4ba91d1d17_o by Red Runner, on Flickr
51429226627_5ebb381b0f_o by Red Runner, on Flickr

 

[RedRunner87]

The "3-4" week wait begins

photo_2021-11-20 14.42.47 by redrunner87, on Flickr

 

[RedRunner87]

Finally got around to adjusting my Parking Brake

Untitled by redrunner87, on Flickr

 

[RedRunner87]

In anticipation of my Trail Standard Offroad bumper coming in, I started wiring up the CaliRaisedLED Dual button switch OEM switch. Next step is wiring up the existing light bars so I can do a quick wire job when I get the 30" ExtremeLED X6s light bar.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

Trail Standard Offroad bumper is ready for Powder Coat.

Untitled by redrunner87, on Flickr

 

[RedRunner87]

Tuesday: Got the gear and t-case fluid
Untitled by redrunner87, on Flickr

Wednesday: Picked up the TSO bumper from Powdercoat
Untitled by redrunner87, on Flickr

Thursday: Boom day
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

If you want to run the ExtremeLED x6s light bar, you will have to use the supplied TSO brackets. However due to the wiring the driver side bracket will not fit. I had to grind it down a good bit. The supplied ExtremeLED brackets will not work. I forgot to upload that picture but I will later.

Untitled by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr
by redrunner87, on Flickr

 

[RedRunner87]

UPDATE time

Got the CaliRaisedLED dual function button installed for the new light bar

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

New Dash Cam

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

K&N Cabin Air Filter

Untitled by redrunner87, on Flickr

Levelers for camping

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Got rid of the GMC Acadia aka Mommy Missile and replaced it an 13 Camry

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

Forgot to add:

Rear Diff and T-case are finished. Running Amsoil in them. Weather hasn't been cooperating so it is hard to get it done.

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

Time to do a little catch up:

Cup holder mod:

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

New front bumper and no more viper cut:
Untitled by redrunner87, on Flickr

Knocked off two more states 9/50:

Untitled by redrunner87, on Flickr

Winch for the TSO bumper:

Untitled by redrunner87, on Flickr

 

[RedRunner87]

Bumper install time!

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

We decided to move the horns and install the Winch Control Box in this location and mount the horns on the hood latch bracket.

Untitled by redrunner87, on Flickr

Lighting all wired up

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

Forgot I had to ground the horns so they work
Untitled by redrunner87, on Flickr

Modified the radiator cover
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

LASFIT LED Headlights installed

Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr
Untitled by redrunner87, on Flickr

 

[RedRunner87]

Sliders back on!

Untitled by redrunner87, on Flickr

 

[bkg]

I like the bumper...

but the winch wiring is driving my OCD into overdrive...

 

[RedRunner87]

I like the bumper...

but the winch wiring is driving my OCD into overdrive...

Honestly one of the biggest thing I dislike about the control box. The bright red wiring. I tried to do what I could but the way the post are on the winch, I couldn't hide it. I am going to see if I can get some wiring loom to cover it up so it isn't as in your face lol