Post your Mitsubishi Pajero Pics

Bama_Kiwi

New member
What size rubber is that? and it looks like 35mm spacers?

275/65R18 (32") and 30mm spacers.

I like the spacers well enough and haven't had any trouble out of them, but I get a lot of grief from my mechanic about them and I have to take them off when I take it in for its warrant of fitness inspection or it will fail. Anything over, I think, 25mm is "illegal" in NZ without an Engineer's recertification, which is very expensive to have done. I should have bought 16" or 17" wheels with the proper offset when I bought my tires but, so it goes. I will do when these are ready for replacement.
 

Cruisn

Adventurer
275/65R18 (32") and 30mm spacers.

I like the spacers well enough and haven't had any trouble out of them, but I get a lot of grief from my mechanic about them and I have to take them off when I take it in for its warrant of fitness inspection or it will fail. Anything over, I think, 25mm is "illegal" in NZ without an Engineer's recertification, which is very expensive to have done. I should have bought 16" or 17" wheels with the proper offset when I bought my tires but, so it goes. I will do when these are ready for replacement.


My rig is from Oz so I understand the legalities. I went with 35mm spacers though. And I also should have followed suit and bought smaller rims but I do like the factory 18's. I am close to needing new rubber hence why I asked the size.
Rig looks mint man.
 
Just getting started with my Gen 3, but I'm having a heck of a lot of fun so far.

Just fitted some Methods and 33" Patagonia tires on and got rid of the plastics. Next step is to rhino line the lower portion up to where the plastics were and do a bit more fender trimming. I was surprised at how well the Pats behave on a Gen 3.
 

Attachments

  • monty.jpg
    monty.jpg
    313.2 KB · Views: 82

4lv4r0

New member
Last photo before installing snorkel and winch.
f1bfda89d873c4c5aba19d7fdc991b12.jpg
 

cch2a

New member
My new 1993 NH Pajero right hand drive. Grey market purchase here in the US. Been mostly restoring things and replacing fluids and belts. Most of my OME lift is here just waiting on springs and tires should go on in a week or two. Debating 32x11.5r15 or 33x10.5r15 as 32s are a bit cheaper. I get compliments everywhere I go which I thought was strange given it's an almost 30 year old truck and I thought I was the only one in the states that thought they were cool. I've learned they gave quite the cult following.
 

Attachments

  • 20210530_180358.jpg
    20210530_180358.jpg
    1.3 MB · Views: 50

cch2a

New member
Updated pics:
OME Torsion Bars
OME Shocks (still waiting on rear springs)
33x10.5r15 General Grabber X3s
 

Attachments

  • 20210619_163852.jpg
    20210619_163852.jpg
    363.8 KB · Views: 62
  • 20210619_163959.jpg
    20210619_163959.jpg
    455.3 KB · Views: 59
  • 20210619_163903.jpg
    20210619_163903.jpg
    747.1 KB · Views: 55

Forum statistics

Threads
185,817
Messages
2,878,511
Members
225,378
Latest member
norcalmaier
Top