Post your Mitsubishi Pajero Pics

AZPAJERO

Observer
hey you have a pic of that rear bumper? Did you build it?

Me? Weld? Hahahahaha.........no. But my good buddy Toasty did

74384f009293600a5c650a269bf6cb42.jpg



Sent from my iPhone using Tapatalk
 

kenley&co

Member
Me? Weld? Hahahahaha.........no. But my good buddy Toasty did

74384f009293600a5c650a269bf6cb42.jpg



Sent from my iPhone using Tapatalk
Nice that looks great, I’m working on one similar I just cut my rear quarter panels down or whatever you’d call them. And working on a mock up

did you also raise the gas tank?
 
A few images from a recent trip around the south part of the south island of New Zealand. Some beautiful country down here. And lots of Pajeros!

My rig is a 93 turbo diesel 4m40, manual, factory locker, 60mm suspension lift, 33s, 4.9 gearing, winch, rated recovery points..... etc
 

Attachments

  • E5AF37BD-FA00-44A7-A00A-3534FBE46DFD.jpg
    E5AF37BD-FA00-44A7-A00A-3534FBE46DFD.jpg
    901.5 KB · Views: 64
  • 2E2E72AC-38B8-4921-B0A8-580BE7F7C23B.jpg
    2E2E72AC-38B8-4921-B0A8-580BE7F7C23B.jpg
    1 MB · Views: 74
  • 82627BF5-4BCA-4186-94D9-C1291CEDBAA0.jpg
    82627BF5-4BCA-4186-94D9-C1291CEDBAA0.jpg
    595.4 KB · Views: 76
  • 3DBC83F2-60E3-4829-8E1C-C3CE7CB416F7.jpg
    3DBC83F2-60E3-4829-8E1C-C3CE7CB416F7.jpg
    639.9 KB · Views: 70
  • A62AB702-656A-4437-A234-124445676110.jpg
    A62AB702-656A-4437-A234-124445676110.jpg
    1,017.5 KB · Views: 58

wolfdog

New member
Can I ask what are the spring rate's that King settled on for front and rear?
And out of interest do you know what the spring rates are from standard?

Jim
 

ChrisCosta416

Well-known member

PacS14

Adventurer
A few images from a recent trip around the south part of the south island of New Zealand. Some beautiful country down here. And lots of Pajeros!

My rig is a 93 turbo diesel 4m40, manual, factory locker, 60mm suspension lift, 33s, 4.9 gearing, winch, rated recovery points..... etc

Can you share pictures of your suspension lift? I'm interested on lifting my Montero, I'm not liking the idea of a body lift.
 

AZPAJERO

Observer
Nice that looks great, I’m working on one similar I just cut my rear quarter panels down or whatever you’d call them. And working on a mock up

did you also raise the gas tank?

Yup. Sure did lift tank.....again, not me, but my forgetful pal Toasty did the work. He’s great .....but can’t remember ******** (apparently)

65184336262d68f0c0c72d90535a0c88.jpg



Sent from my iPhone using Tapatalk
 

Invocandum

New member
Just picked up my new baby. 2005 Limited with just under 110,00km. Original owner traded it in for a Kia Telluride - so I was able to snag this for a great price.

Currently having a CEL/Traction light issue being looked at but will hopefully be back behind the wheel later today.

Dealership did a pretty overzealous “detail” aka make everything slippery as hell with a gallon of Armor All, so I’m planning to spend some quarantine days getting it tip top inside and out.
 

Attachments

  • 6B97ACBE-6692-4EEF-8880-C5CF01BFAEC1.jpeg
    6B97ACBE-6692-4EEF-8880-C5CF01BFAEC1.jpeg
    1.1 MB · Views: 68
  • FBCD6F12-CBDE-4963-8971-43B51F84E13B.jpeg
    FBCD6F12-CBDE-4963-8971-43B51F84E13B.jpeg
    847.1 KB · Views: 68
  • 7749CC09-56AA-4618-854C-914C7BB7E774.jpeg
    7749CC09-56AA-4618-854C-914C7BB7E774.jpeg
    755.6 KB · Views: 68
  • ABADC34F-2ACA-432B-8978-E9F7AF3E7B06.jpeg
    ABADC34F-2ACA-432B-8978-E9F7AF3E7B06.jpeg
    738.8 KB · Views: 64
Can you share pictures of your suspension lift? I'm interested on lifting my Montero, I'm not liking the idea of a body lift.

Sorry for the late reply here. Havent been on for a little bit. Anyway, down here in New Zealand the way many people are doing a suspension lift is to use factory rear springs from a Nissan Safari/Patrol. They fit perfectly and give about a 2.5 inch lift and a higher spring rate. And they are super common, you can get them free or cheap from the Nissan guys. Now if your not in a country with lots of Safari/Patrols this probably isn't so helpful, but the approximate lift I have is 2.5 inches. Previously I was running a set of Dobinson 30mm lift springs (just over an inch), but I eventually found that I wanted/needed more lift than that. Found that I was enjoying some of the harder tracks and needed more clearance.

On the front there isn't that much you can do with the torsion bars. I wound mine up approximately 2 inches (when the truck is full for trips it sits pretty even). But winding up the torsion bars brings the upper A arms drop stops closer to their stops on the frame. This decreases the amount of down travel you have which negatively effects your offroad performance as well as making the truck drive harsh on the road.

So there are two main things I know about to alleviate this problem. The easier (and legal in NZ) way to do this is to just trim the drop stops to open up some of that space again. There is a line about halfway down the stops which is a pretty good place to start. Remember you have 4 drop stops in total, 2 of them are harder to see (back by the brake line) and you could not notice them. The other thing you can do (but is illegal in NZ) is to do an upper ball joint flip. For this you take the upper ball joint, which from factory is attached to the top of the upper A arm, and bolt it to the bottom of the A Arm. You can even put a spacer between the A Arm and the ball joint if you want to go nuts. But like I said, this isnt legal in NZ and is maybe not that safe as now your upper ball joint is only held in place with 3 smallish bolts. But to be honest plenty of people here have done the ball joint flip with no problems driving pretty hard. I am curious how much this would help me, but just cutting the drop stops helped quite a bit.

You asked for photos of my suspension set up. I can get some in the next day or so. But to be honest theres not that much to see. Some taller black springs and some chopped drop stops.

PS just added a bunch of random photos from sweet trips around NZ! Definitely worth a visit once this COVID thing is all over!!
 

Attachments

  • 0P1hwOLrSOGApue3Tpco5w.jpg
    0P1hwOLrSOGApue3Tpco5w.jpg
    2.5 MB · Views: 78
  • 874E568F-9F0A-4BCD-83E3-C58EB9E78170.jpg
    874E568F-9F0A-4BCD-83E3-C58EB9E78170.jpg
    344.9 KB · Views: 84
  • 4F456429-4D39-44B8-B3B8-9E6D4BD267FA.jpg
    4F456429-4D39-44B8-B3B8-9E6D4BD267FA.jpg
    335.2 KB · Views: 84
  • IMG_5117.JPG
    IMG_5117.JPG
    1.6 MB · Views: 89
  • IMG_3538.JPG
    IMG_3538.JPG
    2.6 MB · Views: 86
  • IMG_6292.JPG
    IMG_6292.JPG
    536.6 KB · Views: 78
  • YVcc+fXQSG6Egjvz95cKmA.jpg
    YVcc+fXQSG6Egjvz95cKmA.jpg
    2.3 MB · Views: 68

PacS14

Adventurer
Sorry for the late reply here. Havent been on for a little bit. Anyway, down here in New Zealand the way many people are doing a suspension lift is to use factory rear springs from a Nissan Safari/Patrol. They fit perfectly and give about a 2.5 inch lift and a higher spring rate. And they are super common, you can get them free or cheap from the Nissan guys. Now if your not in a country with lots of Safari/Patrols this probably isn't so helpful, but the approximate lift I have is 2.5 inches. Previously I was running a set of Dobinson 30mm lift springs (just over an inch), but I eventually found that I wanted/needed more lift than that. Found that I was enjoying some of the harder tracks and needed more clearance.

On the front there isn't that much you can do with the torsion bars. I wound mine up approximately 2 inches (when the truck is full for trips it sits pretty even). But winding up the torsion bars brings the upper A arms drop stops closer to their stops on the frame. This decreases the amount of down travel you have which negatively effects your offroad performance as well as making the truck drive harsh on the road.

So there are two main things I know about to alleviate this problem. The easier (and legal in NZ) way to do this is to just trim the drop stops to open up some of that space again. There is a line about halfway down the stops which is a pretty good place to start. Remember you have 4 drop stops in total, 2 of them are harder to see (back by the brake line) and you could not notice them. The other thing you can do (but is illegal in NZ) is to do an upper ball joint flip. For this you take the upper ball joint, which from factory is attached to the top of the upper A arm, and bolt it to the bottom of the A Arm. You can even put a spacer between the A Arm and the ball joint if you want to go nuts. But like I said, this isnt legal in NZ and is maybe not that safe as now your upper ball joint is only held in place with 3 smallish bolts. But to be honest plenty of people here have done the ball joint flip with no problems driving pretty hard. I am curious how much this would help me, but just cutting the drop stops helped quite a bit.

You asked for photos of my suspension set up. I can get some in the next day or so. But to be honest theres not that much to see. Some taller black springs and some chopped drop stops.

PS just added a bunch of random photos from sweet trips around NZ! Definitely worth a visit once this COVID thing is all over!!

Thanks for the reply! I really appreciate it! I asked because on this side of the pond I have never heard of a suspension lift, so you picked my interest. The only way to do it from what I'm seeing is a total custom (expensive) set up... Sucks I really wish we had a ready to buy kit. Oh well I might stay the same or eventually cough up the money to do it right.
 

Forum statistics

Threads
185,533
Messages
2,875,612
Members
224,922
Latest member
Randy Towles
Top