Post Van Parts For Sale Here please

[MadMax321]

Fox 2.0 front shocks off a econoline with the baja grocery getter kit from WeldTec. I upgraded to the 2.0s with reservoirs.

The 2.0s only have around 8k miles. They got a little overspray on them from some bedliner.

80 bucks shipped Conus
Located in Boise

 

[tcg144]

@PhillySMB
I’m doing my ujoint conversion in the next few weeks, have general grabbers with about 6k miles on them. Not sure if the size but I can check if your interested, in located near Reading PA

 

[tcg144]

They are 245/75/16 load range E. General Grabber

 

[C10_Chile]

I have a couple sets of Econoline side mirrors.
Both are power adjust.
Both in good shape and work well.
The grayish spots showing in the pics don't show up like that when looking at them with the naked eye. It's from bugs.
Not really looking to get anything for them from those on the site other than shipping if anybody needs them.

i'll take one pair! really thank you very much from Chile!

 

[Bikersmurf]

Fox 2.0 front shocks off a econoline with the baja grocery getter kit from WeldTec. I upgraded to the 2.0s with reservoirs.

The 2.0s only have around 8k miles. They got a little overspray on them from some bedliner.

80 bucks shipped Conus
Located in BoiseView attachment 575045

Very interested. Could I trouble you for a couple lengths? Fully compressed (eye Center - Middle of rubber “grommets”? Fully extended length?

Edit... Just searched and found they’re for a 6” lift. I’m running 880s which result in 1-2” lift. I’m still curious about lengths, however I suspect they are too long.
Stock shocks limit wheel travel downward... but it’s unlikely your Fox shocks wouldn’t be bottoming out much of the time (Unless the OEM length was way too short).

 

[MadMax321]

Very interested. Could I trouble you for a couple lengths? Fully compressed (eye Center - Middle of rubber “grommets”? Fully extended length?

Edit... Just searched and found they’re for a 6” lift. I’m running 880s which result in 1-2” lift. I’m still curious about lengths, however I suspect they are too long.
Stock shocks limit wheel travel downward... but it’s unlikely your Fox shocks wouldn’t be bottoming out much of the time (Unless the OEM length was way too short).

Extended=21.25 inch
(top of stem to center of hole)
Compressed=17.25 inch

986-24-057 is the part number

 

[old300]

Extended=21.25 inch
(top of stem to center of hole)
Compressed=17.25 inch

986-24-057 is the part number


pm sent

 

[68camaro]

2001 Ford E-350 Superduty van front bumper for sale. Located in Virginia. White, good condition no cracks, took off to put on U-Joint Winch Bumper. No idea on price, best offer.

Van attached to bumper not included...haha

 

[Sigg]

Used, power, passenger side OEM towing mirror. In excellent condition...except it was damaged in shipping. The trim around the base was cracked and one if the bolts was bent slightly. I have the pieces that broke off if you want to fix it. $20 + actual shipping.

 

[tcg144]

@Sigg where you located
Edit, looks like AL, what would shipping be to 17067?

 

[Abitibi]

Anyone know if the lower mirror portion can be replaced on those mirrors (and/or the larger one)? My small mirror is broken so I'd happily pay $20 just for that part...

Sent from my SM-G973W using Tapatalk

 

[Sigg]

@Sigg where you located
Edit, looks like AL, what would shipping be to 17067?

It looks like it'll be just over $16 to ship to 17067. $37 and it's yours. PM me for PayPal info, if you're interested…

 

[Sigg]

WANTED: rear wheel well carpet and the piece of trim that covers the jack storage on a 15 passenger E350.

Sent from my iPhone using Tapatalk

 

[tcg144]

 

[Lilnuts]

I have a Clutch pedal assembly for a e350/e450
must use hydro for brake/steering
It fits great.
I decided to go with an auto....
+shipping and $5 handling (I have to make a trip to the Post Office/UPS/FedEx)
[This part are made for heavy modifing the firewall, NOT a bolt-on]
View attachment 573743

View attachment 573744

Still have this assembly?