Post Van Parts For Sale Here please

[Jsweezy]

40 Gal Aft Axle Gas Tank - 700
I have a 40 Gallon Aft Axle Gas Tank with the sending unit, straps and custom brackets/crossmembers that MG designed for custom installations for sale. The brackets arent plug and play but they aren't difficult to figure out and may require minimal removal of extra material to make fit.

Price - 700
Location - Hillsboro

 

[nonhog]

Have only days until the next scrap run,
96? Safari/Astro hood FREE
96? Safari RH inner door panel FREE
RH fender $35.00
Rear bench in Burgundy FREE
Battery mount painted FREE

local only (Tacoma Wa.)

 

[Justgosurfin]

Things I have that need to go:

Rear tire carrier for a Ford van. it's homebuilt and is the old V-style that SMB put on their vans. 8x165 bolt pattern. It requires 4 holes to be drilled in your door but 2 go through the thick hinges and it's pretty stout. Does not make door sag. Make offer, shipping won't be cheap. I'll let it go cheap so you can save your money for drill bits.

4 hard to find UPPER door trim pieces for Ford vans. These are the no-longer made type that have recesses for blinds/curtains. They came out of my Sportsmobile and are faded and will need to be painted probably.

4 craptastic E-series plastic hubcaps. They've been touched up with silver spray paint (before me) but they are the genuine Ford ones that are getting hard to find. Full set.

I'm out of town working but can get pics of any of this within a few days.

Offers welcome. I'm in Tennessee but travel all over the eastern U.S.

Scotty I’m also interested in your door window moldings. Can you send a photo?

 

[Jsweezy]

Still have this Ujoint OBA and arb locker (rd140) for sale. Located in Hillsboro for $1850.00

 

[Justgosurfin]

Still have this Ujoint OBA and arb locker (rd140) for sale. Located in Hillsboro for $1850.00

Jsweezy, any reason to chose the ARB over ox?

 

[SaltStainedEyes]

Ujoint kit + axle + transmission + xnfer case



https://losangeles.craigslist.org/sfv/pts/6592513124.html

 

[UHAULER]

I have a pair of moog cc880s front springs for a ford van. I bought them from a fellow portal member, they were new when i bought them. I had them on my 98 e350 v10 and it lifted the front about 2". The ride was a little too stiff for me so I went with spacers and have sold the van.
$60 Pick up only in Nevada City ,Ca Send PM

 

[freewayross]

I have complete front clip from 2007 Ford E-350 Van, this should fit all E series from 1992 to 2007 E-150, E-250, E-350, E-450. The parts are in great condition, the van itself has under 50k miles. I did the next generation front end swap so have no use for these. Below are the parts

Hood
Grill
Grill Support/ Header
Radiator support with latch
Headlights
Turn lights
Both fenders (driver side has a little dent)
Bumper
Vacuum Booster and Master Cylinder

I'm located in Phoenix, AZ. Make me an offer

 

[kaceman]

Hey guys I have the following for sale/ free. All located in Simi Valley CA pick up only

E350 Class 5 hitch receiver great shape $50


92-07 E-350 front road armor bumper some surface rust could use a fresh coat of paint
$850


Two swivel seat bases out of a conversion van FREE

Stock full size spare 16x7 8x6.5 FREE

 

[freewayross]

Damn nothing is ever closer to phoenix, would love to get that bumper and swivel base....... any one driving around Simi valley to around phoenix area?

Hey guys I have the following for sale/ free. All located in Simi Valley CA pick up only

E350 Class 5 hitch receiver great shape $50
View attachment 450406

92-07 E-350 front road armor bumper some surface rust could use a fresh coat of paint
$850
View attachment 450407

Two swivel seat bases out of a conversion van FREEView attachment 450408

Stock full size spare 16x7 8x6.5 FREEView attachment 450409

 

[ale]

Got some free stuff I am trying to pass on!

A rear bench seat for a 1998 Ford E350 XLT van,

plus some miscellaneous seat parts, including the start of a jackknife rear folding bench seat.

I am located in southern Denver for local pickup.

PM for pics or more details!

-Ale

 

[Justgosurfin]

My 1 ton Dana 60 rear will be available later this summer when I switch to a sterling.

3.54 gears, 1995 rebuilt 2 years ago by PO.

Also 8x6.5 17” aluminum wheels with 265/75 e rated Michelin’s with about 10k on them.

Just posting now so any interested people can mull it over. I hope to have new stuff in by Septemberish

 

[Jmacn]

2008 Chevy Express Passenger Van Interior parts available for free pickup. Mint condition Tan headliner wired with lights, and HVAC controls, and with foam ducts/vents. Grey plastic interior trim pieces-giant pile. Rear Bench seat with seatbelts. Hate to throw it all out but it's got to go soon...

 

[ohpyramids]

In Los Angeles
1990’s gen center console with cupholders and cassette tape rack $50
1990’s gen driver knee panel? (Plastic that screws in under the steering wheel) $40
Side barn doors interior trim with window panels $50 (tan)
Rear barn doors interior trim with window panels $50 (tan)

 

[fawndog]

2007 10.5 w/aluminum cover
$400

Van D60 perfect condition 100k
$300

NP273 for 5r110 (NP273s work with the JB custom shifter, you just need to fab a bracket.)
$300

I know shipping is expensive, if interested let me know and well get a quote.
94608