Post Van Parts For Sale Here please

86scotty

Cynic
Things I have that need to go:

Rear tire carrier for a Ford van. it's homebuilt and is the old V-style that SMB put on their vans. 8x165 bolt pattern. It requires 4 holes to be drilled in your door but 2 go through the thick hinges and it's pretty stout. Does not make door sag. Make offer, shipping won't be cheap. I'll let it go cheap so you can save your money for drill bits.

4 hard to find UPPER door trim pieces for Ford vans. These are the no-longer made type that have recesses for blinds/curtains. They came out of my Sportsmobile and are faded and will need to be painted probably.

4 craptastic E-series plastic hubcaps. They've been touched up with silver spray paint (before me) but they are the genuine Ford ones that are getting hard to find. Full set.

I'm out of town working but can get pics of any of this within a few days.

Offers welcome. I'm in Tennessee but travel all over the eastern U.S.
 

calebmogul

Member
ALUMINESS ROOF RACK FOR SALE. This aluminum rack is approximately 138 long by 63 inches wide and is in great shape. 20"x20" framed area around sun roof. Only imperfections are three holes drilled through the rear quadrant of the rack where I bolted a solar panel in. Also has a few paint scratches. Paid $1200 new. 2.5 yrs old. I decided to to get a new bubble top roof at Fiberine, so this rack needs to go. Rack is located near SLC, UT until tomorrow night. Will be going to Squaw Valley, CA for work from 5/4-5/16. Have appointment at Fiberine in Los Angeles 5/17. Potential to bring to California or leave in Utah if buyer can act fast. PM me for inquiries. IMG_3193 (1).jpgIMG_3200.jpgIMG_3189.jpgIMG_3187.jpgIMG_3196.jpgIMG_3197.jpg
 
Last edited:

teehee

Adventurer
Ok...not sure where to start....as lives often do, mine has taken a turn. I spent nearly two years dreaming of a 4X4 passenger van, buying two vans as well as assorted components for the conversion, well reality finally set in.

I’m writing here in hopes someone with more time might benefit from all my work and scrounging, lol!

I have two E350 7.3 extended passenger vans. One is running (2003 with 190k) the other (2001 former limo company van with awesome service records 250k) was running great until a mouse chewed some wires...

I have front and rear 3.73 axles from a 2008 F350, a manual shift transfer case NV271, a 4R100 4X4tranny for 7.3 (needs rebuilt or use parts for conversion, Set of 5 17” alloys wheels and 33” tires, and some other odds and ends like extra bench seats, and a huge aluminum fuel tank I was going to modify for the van.

Would love to sell as a package.

Let me know your thoughts. Thx
 

Attachments

  • A59608DE-1BB9-49BB-8724-FCB9D8F2544F.jpeg
    A59608DE-1BB9-49BB-8724-FCB9D8F2544F.jpeg
    1.4 MB · Views: 30
  • 9444FD09-9580-425E-BE57-E6FFB6C1FBE7.jpeg
    9444FD09-9580-425E-BE57-E6FFB6C1FBE7.jpeg
    2.8 MB · Views: 29

VAstyle74

New member
I have 2 Leather Sienna loungers for sale... going a different route. Located in Richmond, VA 804-334-6251 please text
 

Attachments

  • IMG_1298.jpg
    IMG_1298.jpg
    473.8 KB · Views: 36
  • IMG_1299.jpg
    IMG_1299.jpg
    412.9 KB · Views: 35
  • IMG_1300.jpg
    IMG_1300.jpg
    401.8 KB · Views: 31

marret

Active member
Agile Fox RIP shocks for 2008 Quigley GMC/Chevy 4x4 will be available at the end of the month. I'm getting a lift and new shocks. Weldtec Designs is doing the work beginning May 29th and the shocks will be available in SoCal. Probably 25 or so thousand miles on the shocks, don't know for sure.

I may have an Aluminess rear spare tire carrier for sale as well. Don't know right now as I'm going to leave it on the van if possible. I'm having front and rear Weldtec Designs aluminum bumpers installed with the lift as mentioned above. I won't know about the spare tire carrier until I have the bumper installed at Weldtec. 86scotty first in line for spare tire carrier.
 
Last edited:

On Belay

Observer
48" x 125 foot roll of Mylar bubble insulation. Should be enough to do an entire van. I just went a different route for insulation on my project. ~$125

-Vent fan installation materials. Roll of white Eternabond Tape, Alpha Systems 1021 Self Leveling Sealant, 1" Butyl Tape, and 2.5" Butyl Tape. $50 for everything.

I'll be in the front range (Colorado until the end of the week)
 

Attachments

  • IMG_3086.JPG
    IMG_3086.JPG
    2.6 MB · Views: 30
  • IMG_3087.JPG
    IMG_3087.JPG
    2.2 MB · Views: 30
Last edited:

Jsweezy

Explorer
I have a Ujoint on board air system which includes the ARB CKMTA12 compressor and a 2.5 tank as well as an ARB Air Locker (RD140) which covers all gears. All of these items are new in box and have never been installed and were only opened to verify contents. Local pickup only.

Price - $1850.00
Location - Hillsboro, OR
 

Forum statistics

Threads
185,539
Messages
2,875,661
Members
224,922
Latest member
Randy Towles
Top