Post Van Parts For Sale Here please

[sakurama]

SOLD!

I'm bumping this as it's sitting in Jsweezy's shop and I don't want to take up any of his space. New price is $250 or make me an offer. I maybe headed to Idaho next week to pick up our trailer so I could even deliver that far east if it's not too far out of the way.

Gregor

I'm building my van up to a 4x4 with MG Metalworks and using a 2016 front axle and found a Sterling 10.5 for the rear so I am selling my rear axle - it's a 3.55 and I don't think it's limited slip but I'm not sure. As MG tells me it's the rather rare and desirable full floating design and it's a 1 ton and has disk brakes. It came off a shuttle van with 170k miles and there's no rust. Brakes are in decent shape and you even get a pair of wheels to help roll it around! This is a great upgrade for most vans unless you want to jump up to a Sterling which is $$$.

UPDATE: JSweezy got me a photo of the plate. It's not a 3.73 but a 3.55. Not sure what else the numbers mean as I can't find anything else.

I've been told it's worth about $500 but I'd like to get rid of it fast so make me an offer. For $400 I'll deliver it within 100 miles of PDX and for less you can come and pick it up. I have no interest in holding onto a spare axle so make me an offer.

Gregor

 

[bbbthreat]

Extras from a van project I never finished/sold off.

Selling brand new, still in uponened original packaging, Noico deadening material for use in automotive sound/heat applications. Here is what I have:

- Noico 80 Mil (36 sq/ft per box) Butyl Sound Deadening mat. 6 boxes @ $50 per box. Will cover 216 sq/ft in total.

Paid $63.90 per box for the butyl mat on Amazon back in August of 2016. Buy it all and I will throw in an Uxcell application roller (also NIB).


Selling off some unused cases of spray paint. Purchased in August and still all brand new in box.

- 2 (6-pack) Rustoleum Interior Automotive Paint Textured Metallic Graphite 11 oz. Spray: $45 a pack.

Paid $60 (per 6-pack) for the Textured Metallic at Home Depot. Perfect for refinishing a vehicle interior.

Located in Solvang, roughly a half hour north of Santa Barbara, CA.

 

[cruiser812]

The local junkyards have plenty of pop out Ford windows if anyone is interested.
Clear and bronze colored glass.
Ace pull a part and go pull it in Jacksonville, FL.
I'd offer to get them and ship but I fear shipping the glass...

Are they for the rear windows or just the sides? I could use a small side glass and the rear doors. In Tallahassee so it isnt to far of a drive.

 

[cruiser812]

For Sale Ford Sportsmobile Pop Top. RB Regular Body, not extended. Was taken off for a CCV top. Located in Denver,Co
$2000.00

View attachment 411129

Too bad you aren't closer to Florida

 

[cjken]

Anyone in NY
Interested in a 93 mini-mod ambulance?
I've got one that I am not using. 7.3 IDI runs great. About 70k miles.
Unfortunately front brake lines rusted out so it is not currently drivable.
I may turn it into a trailer, but figured I'd see if there was any interest first.
The IDI runs great, but definitely not nearly as powerful as the power stroke 7.3
Here's a picture.
I can dig more up if there is any interest.

 

[Bbasso]

Are they for the rear windows or just the sides? I could use a small side glass and the rear doors. In Tallahassee so it isnt to far of a drive.

At the time they had all the pop out glass to choose from. I picked up the 40 window for $14.

 

[Bikersmurf]

Wanted: driver side inner door pull for a 97 econoline van (light gray plastic). I'm not sure all the years. It's the 5"ish plastic handle that also helps to hold the inner door panel in place. Mine has a corner cracked off so I'd like to replace it someday.

Also Wanted: Ford 7.3 air box for a 97ish PSD. The downside of a 20 year old ambulance with 16k+ hours is plastic parts start to wear out.

 

[silvrzuki77]

Tri folding rear bench seat for sale. Just not going to work with how I want to build my rear storage. Foam is in great condition no rips or tears. Just some sun fade on some awesome red cloth!
$300 obo in Las Vegas


Sent from my iPhone using Tapatalk

 

[ohpyramids]

WTB: 10ft Fiamma F45 awning. Hit me up.

 

[jblaze5779]

I have a Weldtec “Grocery Getter” 6 inch lift for sale. This is labeled as the 6” baja grocery getter on their website. This lift was used for approximately 18 months on a 2001 e350 7.3l and has about 5,000 miles on it. It is still assembled so you could technically just weld on the flanges, take off the existing suspension and throw this one on. Easy peezy. You will need to source rear blocks and shocks.

Baja Grocery Getter:

• Bent I beams. 6″ (all I beams have new pivot bushings)
• Painted extended radius arms with 6″ lift Coils
• Radius arm pivot bushings
• Upgraded 2.0 fox (front) shocks with custom valving by Agile Off Road.

In addition to the lift there is an extra value… the following were replaced when the lift was installed:

• moog upper and lower ball joints, both sides
• all moog steering tie rod ends
• front spindles and wheel bearings, both sides
• turned rotors and new pads
• Abs sensors (You will need to splice your abs sensor connector to the sensor installed on the hub)
• Speed bleeders installed on calipers

This kit is listed for sale at $2,520 on weldtec’s website. I will sell directly to you for $1,900. I am located in Texas.

 

[Mmm pie]

I have most of a sportsmobile rb 50 interior, was planning on using it but the rb50 layout isn't going to work for a family of 5. I have the sink, cabinets and refrigerator. I also have a propane heater, 10 gal water tank. The sportsmobile was rolled so there is some damage on the closet section.
Located in Suffolk Virginia and best offer on most of the parts, really looking to gain some garage space.

http://i288.photobucket.com/albums/ll184/quadsbc/4F0C54CD-65A7-43E3-B641-63AE2979A106_1.jpg

http://i288.photobucket.com/albums/ll184/quadsbc/B16FA1A8-4E62-4598-BCAC-0A649C7AA5D3.jpg

http://i288.photobucket.com/albums/ll184/quadsbc/D36CBE8B-1E74-4376-BF6C-C3E569072623.jpg

 

[hogasm]

I have most of a sportsmobile rb 50 interior, was planning on using it but the rb50 layout isn't going to work for a family of 5. I have the sink, cabinets and refrigerator. I also have a propane heater, 10 gal water tank. The sportsmobile was rolled so there is some damage on the closet section.
Located in Suffolk Virginia and best offer on most of the parts, really looking to gain some garage space.

http://i288.photobucket.com/albums/ll184/quadsbc/4F0C54CD-65A7-43E3-B641-63AE2979A106_1.jpg

http://i288.photobucket.com/albums/ll184/quadsbc/B16FA1A8-4E62-4598-BCAC-0A649C7AA5D3.jpg

http://i288.photobucket.com/albums/ll184/quadsbc/D36CBE8B-1E74-4376-BF6C-C3E569072623.jpg

I can't get your pictures to upload
can you post them here

 

[Mmm pie]

I can't get your pictures to upload
can you post them here

Photobucket sucks, they want $399 a year to host photos, not sure who I will use to host images. I'll shoot you a pm

 

[86scotty]

Flickr works awesome.

Yes, Photobucket is the spawn of Satan.

 

[another_mike]

Photobucket sucks, they want $399 a year to host photos, not sure who I will use to host images. I'll shoot you a pm

I've been using Imgur