Pelfreybilt ::: Group 31 Battery Cage ::: Tacoma, 4Runner, FJ, GX470

[pelfreybilt]

Pelfreybilt ::: Group 31 Battery Cage
http://www.pelfreybilt.com/product/battery-cage/

This cage mounts in the factory location with heavy duty J-Bolts and allows for installation of a larger group 31 battery. Gone are the days of Dual Batteries!

The group 31 battery provides massive gains over stock group 27 size batteries. Averaging 1150 CCA and a 205 minute capacity, it out-performs any other in its class, as well as some dual battery setups, without the dual battery cost and installation. These batteries are sealed AGM batteries that are designed to take abuse and shock. Dual posts allow for easier installation of your aftermarket leads. For people with a large amount of aftermarket accessories, lighting, stereos and winches, these batteries are a must.

Details:
- Works with most Group 31 batteries
- Stainless Steel
- No drilling or modifications required
- All hardware included

Compatible with:
- 05 + Tacoma
- 03 + 4Runner
- 08-14 FJ Cruiser
- 03-09 Lexus GX470


Order Here!
http://www.pelfreybilt.com/product/battery-cage/

*Battery not included

 

[dcwn.45]

That looks great, I’ve been considering going to two batteries and I think this is a better route for me.
What battery do you recommend?

 

[McFly2003]

Up high on my to-buy list! Possible group buy?

 

[pelfreybilt]

That looks great, I’ve been considering going to two batteries and I think this is a better route for me.
What battery do you recommend?

We don't have a go-to battery, but this works on the following:

Diehard Platinum Group 31M, Odyssey Group 31M, NorthStar Group 31M, Trojan Group 31M, Optima Group 31M.

 

[pelfreybilt]

Up high on my to-buy list! Possible group buy?

Great! No group buys planned at this time, but that could change with enough interest

 

[Hodakaguy]

I modified the group 31 holder by welding on some studs to accept a Blue Sea M-ACR for my dual battery setup. Works great.

Hodakaguy

 

[BJ'sFJ]

Would this work on the Tundra?

 

[pelfreybilt]

I modified the group 31 holder by welding on some studs to accept a Blue Sea M-ACR for my dual battery setup. Works great.

Hodakaguy

Awesome setup! Thanks for sharing

 

[pelfreybilt]

Would this work on the Tundra?

Great question - we haven't confirmed on a Tundra but will test fit and post up here when we do

 

[pelfreybilt]

Would this work on the Tundra?

Great question - we haven't confirmed on a Tundra but will test fit and post up here when we do

After doing some test fitting we've found this will not fit the Tundra. Don't be surprised if we release a Tundra version down the road (possibly later this year)

 

[pelfreybilt]

We have 10 units in stock and ready to ship! Order yours now and these will ship within 1-2 business days.

http://www.pelfreybilt.com/product/battery-cage/

-Pelfreybilt

 

[V1GiLaNtE]

How is the hood clearance on the 4Runners? It's been a common issue that it's a very tight fit with Group 31s.

 

[pelfreybilt]

How is the hood clearance on the 4Runners? It's been a common issue that it's a very tight fit with Group 31s.

We haven't found any issues in the standard configuration. Adding accessories on top of the cage may pose clearance issues.

-Pelfreybilt
www.pelfreybilt.com

 

[pelfreybilt]

At Pelfreybilt Off-Road, we also carry Fuse Panels for Automatic and Manual Trucks. For both vehicles we offer 3 different versions (Blue Sea, Bussman, Blank). Above is the Blue Sea Version mounted in a Toyota 4Runner. For more info on all Pelfreybilt Off-Road Electrical visit:
http://www.pelfreybilt.com/product-category/accessories/electrical-solutions/

AUTOMATIC:
http://www.pelfreybilt.com/product/fuse-panel-automatic/

MANUAL:
http://www.pelfreybilt.com/product/fuse-panel-manual/

-Pelfreybilt Off-Road
www.pelfreybilt.com