Pajero mk1- build (from POLAND)

[Tilapka]

STAGE IV - additions and accessories

BASE WINCH
I decided to make a base for the winch using the factory holes in the car frame. The base for the winch should now have the possibility of gluing the front bumper to it.

 

[Tilapka]

FRONT BUMPER

First, I had to create a bumper pattern. I used cardboard boxes and a board for this.


Follow the progress of the project on my Tilapka Youtube channel

 

[Tilapka]

The next stage of work on the construction of the bumper was transferring the template to the sheet metal, cutting and welding the elements.

 

[Tilapka]

To strengthen the bumper, I used vertical partitions from the inside.

 

[Tilapka]

Trying on.

 

[Tilapka]

... and kangaroo.

 

[Tilapka]

And this is how the bumper looks after grinding.

 

[Tilapka]

REAR BUMPER

I decided to leave the original rear bumper, only slightly modify it. The bumper was cut from the width. The plastic covers were dismantled and in their place I welded the sheet as an integrated whole. The bumper mounts were original.

 

[Tilapka]

ROOF RACK

I used prefabricated angle bars to build the roof rack. I used WEMA construction boards as a platform.
The roof rack is also suitable for mounting a roof tent and roof light. Four lamps in the front and two in the back.

 

[Tilapka]

part 2