OVRLND Camper - crolison’s build

[crolison]

Worked on the fridge slide more today. I was taking off all day to work on the truck but of course work emergencies happened.

But I have the skeleton done and most of the panels made up. Think I’ll head to Home Depot tomorrow to get the shelve and top for the fridge slide.

 

[crolison]

Worked some today on installing a renogy 160w flexible solar planet.

I used industrial outdoor extreme Velcro to hold it down. I need to add a smallwindbreak on the front of the panel.

 

[crolison]

Got an hour to work on the camper today, finished up the fridge portion of the storage. Used a cable chains to guide the power cable in and out. Turned out nicely. I also got another 8020 section installed through the floor. Now I have the measurements needed to start my floor finishing. Which will be vinyl sheet over marine plywood. Also took some updated interior shots for an article.

 

[crolison]

Worked on the flooring today, used some vinyl sheet remenance from Home Depot. The plywood wrapped in the sheet vinyl is near a press in fit.

 

[crolison]

Worked on the downstairs vent and hvac today.

 

[MGSlynch]

Have the same concept in my head but I'll probably go with the leentu camper soon. Keep up the good work.

 

[crolison]

Started working on the side bench storage this afternoon. Also added a screen to the propex intake, and got in a blue ridge overland gear camp chef stove bag.

 

[crolison]

Working on the side bench more today, also added some more blue ridge overland gear bags.

 

[crolison]

Worked a little more on getting ready for countertops, and also found a place for the ************** bucket.

 

[alexplb]

it seems a bit raw and unfinished compared to companies like vagabond or habitat from AT, what is the price on these and do they come shell only or have options with full build outs. I looked at the official page but couldn't find much info on prices and specs.

 

[crolison]

it seems a bit raw and unfinished compared to companies like vagabond or habitat from AT, what is the price on these and do they come shell only or have options with full build outs. I looked at the official page but couldn't find much info on prices and specs.

I would the only thing that is more finished on the vagabond or habitat is the ceilings of them. The interior of the base model AT or vagabond is just aluminum the difference being the vagabond and AT are 1/8 bent aluminum vs the ovrlnd is an aluminum frame that is skinned. In bare bones construction the ovrlnd is pretty much a stripped version of the top half of a FWC.

Customization is only your imagination with the ovrlnd as they are built to order.

 

[alexplb]

I would the only thing that is more finished on the vagabond or habitat is the ceilings of them. The interior of the base model AT or vagabond is just aluminum the difference being the vagabond and AT are 1/8 bent aluminum vs the ovrlnd is an aluminum frame that is skinned. In bare bones construction the ovrlnd is pretty much a stripped version of the top half of a FWC.

Customization is only your imagination with the ovrlnd as they are built to order.

but what kind of price do they average at? I guess the welded construction is more pleasing and offers that "finished" look I've mentioned.

 

[crolison]

but what kind of price do they average at? I guess the welded construction is more pleasing and offers that "finished" look I've mentioned.

They are in between go fast and vagabond for pricing.

 

[crolison]

Worked a lot yesterday and today to finish up the interior of the camper

 

[crolison]

The last steps are finishing the “kitchen” and the countertops

Also got part of the kitchen started today