masterwacker
New member
Well, I have finally figured out and gotten around to posting some pictures of my truck. Here are the list of mods so far done:
Suspension
Sky manufacturing hanger
Marlin 4" springs up front with boomerang shackles
Procomp 9000 shocks
Rear Marlin 5" long travel springs with 2" lift shackles
Procomp 9000 shocks
Drivetrain
3.0 V6 with 266,321 miles
'85 front axle with Sky's truss
Marlin crossover steering
Axle widening kit not spacers
Marlin steering stabalizer
Warn hubs
custom front driveshaft
5.29 with TruTrac front and rear both V6 diffs
custom carrier bearing drop
Other
35 x 12.5 R15 Pro Comp Xterrains
15 x 8 Outlaw II
Modified TJM bumper
Milemarker 9500 winch
Wireless remote for winch
custom exhaust (Magnaflow cat and Flowmaser 40 muffler)
Downey headers
Tacoma center console swap
ARB snorkle
ISR mod
Optima battery
Warn dual beam front lights
EBAY P.O.S. headlights
clear corners
Alteeza tailights with LED backup bulb
Defender roof rack with Hella 500s
Uniden scanner
Kenwood reciever
Kenwood 4" front speakers
Kenwood 6" rear speakers
MTX amp
Infinity reference 12" sub in custom enclosure
Radio Shack CB
Custom built overhead CB console
Bushwacker fender flares
Working on
Rear bumper with tire carrier
On board air
180 amp alternator
dual batteries (2nd one possible main inside of truck)
Planning on doing in the future
High pinion front diff with Toyota E-locker
Either rear detroit of E-locker
Dual transfer case
1 piece rear driveshaft
coilovers up front with 4 link (ORS probably)
Hella headlights
4crawler upgraded harness
3.4 swap, supercharged, and possible automatic conversion(collecting parts as we speak)
sliders and roll cage
mastercraft seats with 5 point harness (placed order today)
Re-paint truck in summer and lower half will be black Linex
and more...
Here are some pictures of my truck,
1
2
3
4
Radio, MP3, Scanner, and open port is for a switch plate
Tacoma Center Console fits perfectly with minor modifications
Overhead console I built for my CB and some switches
So what do you guys think???
Suspension
Sky manufacturing hanger
Marlin 4" springs up front with boomerang shackles
Procomp 9000 shocks
Rear Marlin 5" long travel springs with 2" lift shackles
Procomp 9000 shocks
Drivetrain
3.0 V6 with 266,321 miles
'85 front axle with Sky's truss
Marlin crossover steering
Axle widening kit not spacers
Marlin steering stabalizer
Warn hubs
custom front driveshaft
5.29 with TruTrac front and rear both V6 diffs
custom carrier bearing drop
Other
35 x 12.5 R15 Pro Comp Xterrains
15 x 8 Outlaw II
Modified TJM bumper
Milemarker 9500 winch
Wireless remote for winch
custom exhaust (Magnaflow cat and Flowmaser 40 muffler)
Downey headers
Tacoma center console swap
ARB snorkle
ISR mod
Optima battery
Warn dual beam front lights
EBAY P.O.S. headlights
clear corners
Alteeza tailights with LED backup bulb
Defender roof rack with Hella 500s
Uniden scanner
Kenwood reciever
Kenwood 4" front speakers
Kenwood 6" rear speakers
MTX amp
Infinity reference 12" sub in custom enclosure
Radio Shack CB
Custom built overhead CB console
Bushwacker fender flares
Working on
Rear bumper with tire carrier
On board air
180 amp alternator
dual batteries (2nd one possible main inside of truck)
Planning on doing in the future
High pinion front diff with Toyota E-locker
Either rear detroit of E-locker
Dual transfer case
1 piece rear driveshaft
coilovers up front with 4 link (ORS probably)
Hella headlights
4crawler upgraded harness
3.4 swap, supercharged, and possible automatic conversion(collecting parts as we speak)
sliders and roll cage
mastercraft seats with 5 point harness (placed order today)
Re-paint truck in summer and lower half will be black Linex
and more...
Here are some pictures of my truck,
1
2
3
4
Radio, MP3, Scanner, and open port is for a switch plate
Tacoma Center Console fits perfectly with minor modifications
Overhead console I built for my CB and some switches
So what do you guys think???