MOIRAI 1995 4x4 Fire Rescue BUILD Thread

Jdubucsd

Addicted to Espresso
Aaaah. Well. Another long day. Filled in the upper rear with 3.75” of Thinsulate through my opening. No way to get it in other wise. Tidy up the rear cam and third brake light feed through it. Spent most of the day shaping rigid insulation sheets for the lower Dometic CRX-50 fridge. Its a real tight fit all around. But Im pretty sure its gonna help the fridge draw less amps. Has 2.5” top and bottom. And can only fit 0.5” on the two sides since the cabinet is 16” wide and fridge is 15”.
 

Attachments

  • AE0C305E-8DEB-4DB6-B46C-1FB576382602.jpeg
    AE0C305E-8DEB-4DB6-B46C-1FB576382602.jpeg
    773.3 KB · Views: 14
  • F6743779-1A2D-45CA-BEC5-1837FF37ABD7.jpeg
    F6743779-1A2D-45CA-BEC5-1837FF37ABD7.jpeg
    1.1 MB · Views: 13
  • 5C2E6542-1C8C-45E1-B641-78153A203238.jpeg
    5C2E6542-1C8C-45E1-B641-78153A203238.jpeg
    869.6 KB · Views: 12
  • 259D0C2A-D129-4610-AA69-1A7B1B4DECC6.jpeg
    259D0C2A-D129-4610-AA69-1A7B1B4DECC6.jpeg
    790.5 KB · Views: 8
  • 4DD42E60-B07E-4243-B0C2-E20CAEFC0B2B.jpeg
    4DD42E60-B07E-4243-B0C2-E20CAEFC0B2B.jpeg
    693.2 KB · Views: 7
  • 41F0ADDA-E321-42E1-BFB8-8337588D855F.jpeg
    41F0ADDA-E321-42E1-BFB8-8337588D855F.jpeg
    615.7 KB · Views: 7
  • 0B5A8FC3-637C-4E6C-A5B2-5C123323F3E3.jpeg
    0B5A8FC3-637C-4E6C-A5B2-5C123323F3E3.jpeg
    650.9 KB · Views: 7
  • B1BDDCC1-441B-449C-8B84-659B077BF87D.jpeg
    B1BDDCC1-441B-449C-8B84-659B077BF87D.jpeg
    970.4 KB · Views: 7

Jdubucsd

Addicted to Espresso
Placed a bead of silicone along the floor lines under the rigid foam. And gaps running to the side door. Used some expensive flue metallic tape. Its all they had. To cover the rigid board ends after I cut them. The cabinets were fully scoured with a 3M green pad. Rubbing alcohol. And steam cleaned every nook and cranny. Polished and cleaned up the side door hardware strap mounts and some interior carriage bolts and nuts.
 

Attachments

  • E40F11B2-38B0-46A5-A1AA-CD6111AA894C.jpeg
    E40F11B2-38B0-46A5-A1AA-CD6111AA894C.jpeg
    1.2 MB · Views: 14
  • 38496D42-ADEB-423B-AE1C-D5F29E78DB6A.jpeg
    38496D42-ADEB-423B-AE1C-D5F29E78DB6A.jpeg
    1.1 MB · Views: 17
  • 4AEC815D-1163-4D69-80B0-7896C0C70CF2.jpeg
    4AEC815D-1163-4D69-80B0-7896C0C70CF2.jpeg
    757.7 KB · Views: 14
  • 8560A22C-D8E1-4C31-9A67-7CDD21141089.jpeg
    8560A22C-D8E1-4C31-9A67-7CDD21141089.jpeg
    1.3 MB · Views: 13
  • 8FC8855B-C9C7-460D-A5E0-F5E85177A80A.jpeg
    8FC8855B-C9C7-460D-A5E0-F5E85177A80A.jpeg
    1.2 MB · Views: 12
  • 0B37F71B-8E61-4D60-9A69-F5E49315BA60.jpeg
    0B37F71B-8E61-4D60-9A69-F5E49315BA60.jpeg
    755.3 KB · Views: 13

Jdubucsd

Addicted to Espresso
Two prong whelen bulb. Its the third upper brake light. Broken. $25 replacement or...?

Upper fridge polysio secure. And up behind that is a hollow valance area. 24”x3”x2” or so and cut a nice piece of Thinsulate to fill it up. Nice clean and tidy.?
 

Attachments

  • 50CB36EE-3DEA-41B0-A138-9EDE9741D19F.jpeg
    50CB36EE-3DEA-41B0-A138-9EDE9741D19F.jpeg
    1 MB · Views: 13
  • 03C13F3D-BF59-4FD7-8B84-8B64EEA637A6.jpeg
    03C13F3D-BF59-4FD7-8B84-8B64EEA637A6.jpeg
    990.6 KB · Views: 13
  • 0855C7E5-2083-4B36-8DE8-7065A10F0C42.jpeg
    0855C7E5-2083-4B36-8DE8-7065A10F0C42.jpeg
    1,020.4 KB · Views: 13
  • 56EFCA07-AFD3-4E23-A94E-9707EB0B1776.jpeg
    56EFCA07-AFD3-4E23-A94E-9707EB0B1776.jpeg
    1 MB · Views: 13
  • F7E0AF04-17D9-4DD1-95FF-955E2B822B89.jpeg
    F7E0AF04-17D9-4DD1-95FF-955E2B822B89.jpeg
    1.2 MB · Views: 12

Bikersmurf

Expedition Leader
Two prong whelen bulb. Its the third upper brake light. Broken. $25 replacement or...?

Upper fridge polysio secure. And up behind that is a hollow valance area. 24”x3”x2” or so and cut a nice piece of Thinsulate to fill it up. Nice clean and tidy.?

I’ve found a number of different 2 prong lLEDs that work to replace other EMV bulbs. The 2.4w LEDs are as bright as 40 w Halogen bulbs, and hardly drain the battery,
 

Jdubucsd

Addicted to Espresso
I’ve found a number of different 2 prong lLEDs that work to replace other EMV bulbs. The 2.4w LEDs are as bright as 40 w Halogen bulbs, and hardly drain the battery,
Hey man. Do you have a link or a model make etc for the bulbs? Its just for a third brake light
 

Jdubucsd

Addicted to Espresso
Im going for this floorplan and look so to say. The wood I cut its about 16 1/4” high. To align with the existing dark grey bench on the passenger side. Seems several inches higher than a standard camper height.
 

Attachments

  • 977A9DC2-4B53-4F05-8CAF-AC73F5E3AD20.jpeg
    977A9DC2-4B53-4F05-8CAF-AC73F5E3AD20.jpeg
    1.3 MB · Views: 21
  • B8133CBC-5B8C-48C2-A6EC-2D3B7A18954B.jpeg
    B8133CBC-5B8C-48C2-A6EC-2D3B7A18954B.jpeg
    989.8 KB · Views: 20

Bikersmurf

Expedition Leader
Personal I’d use these if they’d fit... just need to modify to add 2 ‘pins’

Or G4 bulbs that have 2 pins...

Out of 10 each set has had 1 dud.

There seem to be lots of G4 landscape light bulbs.
 

Jdubucsd

Addicted to Espresso
Personal I’d use these if they’d fit... just need to modify to add 2 ‘pins’

Or G4 bulbs that have 2 pins...

Out of 10 each set has had 1 dud.

There seem to be lots of G4 landscape light bulbs.
Thanks! Ill check em out.
 

Jdubucsd

Addicted to Espresso
Rear bed platform...? Its just set up rough. But it will need to have batteries underneath. Probably the Espar D2 someplace there as well. Its 16 1/2” from floor to top of the platform. Same height as existing bench seat. Im liking it.
45 degree cut on some aluminum for the under bench corner.
 

Attachments

  • D5CDEEE2-1A30-4859-871F-9F98F95EF495.jpeg
    D5CDEEE2-1A30-4859-871F-9F98F95EF495.jpeg
    1.3 MB · Views: 15
  • 0C19C59A-8CA5-45C5-8D92-0651269EA4E3.jpeg
    0C19C59A-8CA5-45C5-8D92-0651269EA4E3.jpeg
    989.8 KB · Views: 15
  • F7BD3FD8-0643-49AA-A154-3A90E6E8A4B6.jpeg
    F7BD3FD8-0643-49AA-A154-3A90E6E8A4B6.jpeg
    1.1 MB · Views: 16
  • 7A7E4A14-CFDF-4EA0-AD96-781E452E1FF1.jpeg
    7A7E4A14-CFDF-4EA0-AD96-781E452E1FF1.jpeg
    1.2 MB · Views: 19
  • 8A11005E-A3EA-4F43-AC9A-7ED7B6E7130C.jpeg
    8A11005E-A3EA-4F43-AC9A-7ED7B6E7130C.jpeg
    1.2 MB · Views: 18
  • A0EF3CC3-FC43-422E-9C3B-AC2CC361B124.jpeg
    A0EF3CC3-FC43-422E-9C3B-AC2CC361B124.jpeg
    1.2 MB · Views: 16
  • 4629D01B-88B3-466D-A9F1-D5A723F394A3.jpeg
    4629D01B-88B3-466D-A9F1-D5A723F394A3.jpeg
    1.1 MB · Views: 16
  • 163AFCD6-B106-4E99-98DB-4E7D1B5C3E70.jpeg
    163AFCD6-B106-4E99-98DB-4E7D1B5C3E70.jpeg
    2 MB · Views: 16
  • 2B0A23D7-DC6B-4A51-AC66-B9F50ECD9E01.jpeg
    2B0A23D7-DC6B-4A51-AC66-B9F50ECD9E01.jpeg
    987 KB · Views: 16

Jdubucsd

Addicted to Espresso
My best to shape the 2” Polyiso on top of the Dometic CRX-50
 

Attachments

  • E8CE286C-30E8-49C0-BA41-0474852D07BF.jpeg
    E8CE286C-30E8-49C0-BA41-0474852D07BF.jpeg
    697.3 KB · Views: 10

Jdubucsd

Addicted to Espresso
One of two fridges. Progress!
 

Attachments

  • 66319A9A-D92C-463A-91B2-4550CFACE9EB.jpeg
    66319A9A-D92C-463A-91B2-4550CFACE9EB.jpeg
    757.7 KB · Views: 16

Jdubucsd

Addicted to Espresso
Pos and negative 00 battery leads. These will hookup to the rear aux batteries to be charged from the 220 amp alternator. Split loomed up and ready for install. Purchased fron Battery Cables USA. Really nice. Clean. Very pliable and easy.
 

Attachments

  • B06C3640-7BE4-4EEC-98B8-7D838DDBC770.jpeg
    B06C3640-7BE4-4EEC-98B8-7D838DDBC770.jpeg
    1,004.7 KB · Views: 9
  • 61D8A894-4EC6-42A1-8918-18AC1369DFE3.jpeg
    61D8A894-4EC6-42A1-8918-18AC1369DFE3.jpeg
    1 MB · Views: 7
  • 60A1213A-B053-4E08-B78D-CB49B948FCEB.jpeg
    60A1213A-B053-4E08-B78D-CB49B948FCEB.jpeg
    1,012 KB · Views: 7

Jdubucsd

Addicted to Espresso
What happens when you try to VHT tint spray red lenses. I ended up having to buy two new red ones. Clears are about $48 each. Red $15. The spray is no bueno
 

Attachments

  • 7FC0CE77-5687-47A1-A26A-BEEFD19111E8.jpeg
    7FC0CE77-5687-47A1-A26A-BEEFD19111E8.jpeg
    1.2 MB · Views: 14
  • 70B664AE-6621-41A9-9E85-3303052BA3CE.jpeg
    70B664AE-6621-41A9-9E85-3303052BA3CE.jpeg
    1.1 MB · Views: 12

Jdubucsd

Addicted to Espresso
Friends drill press. Old one too. Framing out #8 recessed screws into maple every 2”. Overkill. But I like how it looks too. All wood is maple or plywood with maple veneer
 

Attachments

  • 4CEA6836-64FA-4AAF-9F06-8111D086E04D.jpeg
    4CEA6836-64FA-4AAF-9F06-8111D086E04D.jpeg
    1.1 MB · Views: 12
  • BB1277A9-12C9-45B0-BBBA-81858911EBAC.jpeg
    BB1277A9-12C9-45B0-BBBA-81858911EBAC.jpeg
    1.6 MB · Views: 12
  • 833B35F5-BF1E-4E3F-A34E-61505F1654EE.jpeg
    833B35F5-BF1E-4E3F-A34E-61505F1654EE.jpeg
    1.1 MB · Views: 12
  • 950C2040-FEE5-47ED-9A1D-5E14197FEC58.jpeg
    950C2040-FEE5-47ED-9A1D-5E14197FEC58.jpeg
    1.2 MB · Views: 12
  • 2EF5AF74-730B-4066-80EB-744366CF2A29.jpeg
    2EF5AF74-730B-4066-80EB-744366CF2A29.jpeg
    1.4 MB · Views: 12
  • 8263AC06-07BD-47B0-B384-CB9ADD2B9795.jpeg
    8263AC06-07BD-47B0-B384-CB9ADD2B9795.jpeg
    1.6 MB · Views: 12
  • 12C87DFE-F8C3-4740-BFC2-075D69C2B528.jpeg
    12C87DFE-F8C3-4740-BFC2-075D69C2B528.jpeg
    1.4 MB · Views: 12
  • 59ADA49B-F196-451F-8CF9-A1A1F1044BEB.jpeg
    59ADA49B-F196-451F-8CF9-A1A1F1044BEB.jpeg
    1.3 MB · Views: 12

Jdubucsd

Addicted to Espresso
00 grounded to frame. And 00 relay bar from the alternator to the back area. I used a 2” through hull fitting. Nice protection. And some support too. Safe also.
 

Attachments

  • C3829BB0-2FB3-4ACB-8CEB-70BD2B80F09A.jpeg
    C3829BB0-2FB3-4ACB-8CEB-70BD2B80F09A.jpeg
    980.2 KB · Views: 12
  • B5861989-8B14-4BBD-A1D7-4C2B823A0F97.jpeg
    B5861989-8B14-4BBD-A1D7-4C2B823A0F97.jpeg
    961 KB · Views: 12
  • 1FF43647-8253-45EE-86C7-86083EA057B7.jpeg
    1FF43647-8253-45EE-86C7-86083EA057B7.jpeg
    951.6 KB · Views: 12
  • D11A3EB4-EBF4-4DB2-9AA1-8245FE83ADCD.jpeg
    D11A3EB4-EBF4-4DB2-9AA1-8245FE83ADCD.jpeg
    1.1 MB · Views: 12
  • 36929474-8AD4-40BD-8461-5BE095C691EE.jpeg
    36929474-8AD4-40BD-8461-5BE095C691EE.jpeg
    882.7 KB · Views: 12
  • 0F0C23C4-1600-461C-8047-4346FF582609.jpeg
    0F0C23C4-1600-461C-8047-4346FF582609.jpeg
    1 MB · Views: 12
  • 37F912B3-1C7B-4566-91FE-57D855938868.jpeg
    37F912B3-1C7B-4566-91FE-57D855938868.jpeg
    1.1 MB · Views: 12

Forum statistics

Threads
185,529
Messages
2,875,555
Members
224,922
Latest member
Randy Towles
Top