Ozrockrat
Expedition Leader
I am in the midst of converting my Freightliner with the OM926 into 4WD. But the position and depth of the oil pan is going to cause issues.
My pan is obviously designed to allow clearance for the drop axle and it has a large belly at the front of the engine. The edge of this belly is will foul on the diff if I raise it the minimum height to give adequate tire clearance.
Do any of you guys with this engine have a different shaped oil pan.
My pan is obviously designed to allow clearance for the drop axle and it has a large belly at the front of the engine. The edge of this belly is will foul on the diff if I raise it the minimum height to give adequate tire clearance.
Do any of you guys with this engine have a different shaped oil pan.