Lighting Inside Truck Bed Cap

[D45]

I need to add one or two smaller LED light bars to the inside of the cap

Any mounting ideas or where to put them?

My truck cap does not have the carpet lining, just bare fiberglass

I ran 14G wiring to the cap and have a 3 hole accessory outlet strip, so I have plenty of power available for the LED lights

I tried epoxy on an old truck cap I had before and it never held

On my old Ram, I used the factory holes from the roof rack and created a mounting grid. However, on my new truck I do not have a roof rack and also do not want to drill any holes in the cap.



I was thinking of buying two smaller LED flood lights and mounting them with a self tapping screw, into the aluminum side window channels

 

[The Artisan]

I plan to use rechargeable led light bars with Industrial velcro
Kevin

 

[D45]

I tried 5 different adhesives and sealants and epoxies before...…..between subzero temps and vibrations, nothing held at all

 

[D45]

I ended up buying small mini LED light pods for a motorcycle

Small and lightweight yet powerful.......self tapping screw in the mounting bracket to the aluminum window channel