Kimberley Inspired Camper Build

joey.hendrix

Observer
Spent some time attaching the nose of the camper along with reinforcing the exterior seams with fiberglass tape and epoxy. The fiberglass tape becomes transparent as it absorbs the epoxy. Just need to make up the roof panels now.


Hooked up the the jeep for a test pull and photo.
0-62.jpg

0-60.jpg
 

joey.hendrix

Observer
We've had a wet winter so far. The rain and my days off have lined up perfectly so have not been able to roll the camper out to work on it. This weekend decided to start on the electrical distribution panel which will be mounted in the tongue box.

Ordered Hella fuse and relay boxes, Blue Sea bus bars and a main breaker/switch from Amazon. Got wire, ring terminals and terminal bars from Waytec.
IMG_1032.jpg
 

joey.hendrix

Observer
The Hella fuse and relay boxes can be snapped together which makes a neater looking setup. Got everything laid out and mounted to the board.
IMG_1033-(1).jpg
 

OZKAM

New member
Hey Joey, you still kicking ? Just wondering how the builds going, Come on mate dont leave us hanging :)
 
Top