Hodakaguy's 4x4 Sprinter Build

I don’t know what the laws are in other states, but it’s illegal to run beadlocks on the street in CA.
Unless DOT approved and stamped (?) The DOT doesn’t show but it’s definitely present. I was checking what the front looks like at 14psi.F336BD9D-0B2F-4AE2-9505-A1A2707726C1.jpeg
 
Last edited:

38snubby

Active member
I don’t know what the laws are in other states, but it’s illegal to run beadlocks on the street in CA.

I was only poking in fun, notice the smiley next to my comment. Furthermore, I have been following Hodakaguy's threads for some time now and love his posts and pics.
 

VanIsle_Greg

I think I need a bigger truck!
I seriously want a set of those on my Ram 1500. Just lifted it and put on a set of 35's... on the factory wheels. Perfect fit, only rubs slightly at full lock on a hard bump. But... those wheels though. Sigh

*Gets out visa card...

:p
 

Hodakaguy

Adventurer
Oooohhhhh yeah. The UPS man brought me some goodies today!

Vancompass 6.3 kit that I ordered from Cory at Peak10Customs showed up today.......Now it's just a LOT of work and it will be all installed. ;)

20220325_123149-X2.jpg


All laid out on a table to take inventory and prepare for install.

20220325_125028-X2.jpg


20220325_161132-X2.jpg



Rear lift kit (Includes the spring pack on the floor).

20220325_161137-X2.jpg



Front Shock mounting kit.

20220325_161140-X2.jpg



Front 2" lift kit and Sumo Springs.

20220325_161144-X2.jpg



Falcon adjustable stocks.....Oh yeah!

20220325_161151-X2.jpg



Install pics to come soon!

Hodakaguy
 

VanIsle_Greg

I think I need a bigger truck!
This build is fast becoming has now become my favorite build to follow on ExPo!

Sexy partz.

I just installed all new Bilstein goodies... and feel, underwhelmed with my kit now. :unsure:
 
If you really want to spend some $/€:

full locking TC (unlike stock), 2.85:1 low range, selectable locking F/R diffs (again unlike stock), well engineered suspension lift allowing at least 35s, maybe bigger. The only downside is cost ~$60k for the full monty.
Lower low range isn’t just for “technical rock crawling”, more in order to prevent breakage of everything from driveline/suspension parts to especially interior content of camper.
 

Hodakaguy

Adventurer
If you really want to spend some $/€:

full locking TC (unlike stock), 2.85:1 low range, selectable locking F/R diffs (again unlike stock), well engineered suspension lift allowing at least 35s, maybe bigger. The only downside is cost ~$60k for the full monty.
Lower low range isn’t just for “technical rock crawling”, more in order to prevent breakage of everything from driveline/suspension parts to especially interior content of camper.

I've seen that setup, It's awesome but WAAAAY out of my budget!

Hodakaguy
 

Hodakaguy

Adventurer
Time to get this suspension install going!

First up I jacked up the rear of the van and supported the van with two 5 ton jack stands, since I'm working on gravel (Yeah I know not ideal) I cut a couple pieces of 3/4" ply to support the stands. I put another pair of 5 ton jack stands on the rear of the vehicle under the hitch as a backup, these were just barely touching the hitch and were there for emergency back up.

Rear wheels removed and ready to go.

20220326_074239-X2.jpg



Stock Suspension.....by by.

20220326_074247-X2.jpg



Removing the stock sway bar links. The hardware will be re-used when installing the new longer links later.

20220326_074306-X2.jpg


20220326_074534-X2.jpg



Temporarily removing the tab holding the E-brake cable. I always place the hardware back in place so it doesn't get lost.

20220326_075153-X2.jpg



Removing the OEM shocks. Quite the difference compared to the Falcons that are going on.

20220326_075211-X2.jpg


20220326_075709-X2.jpg



Lower E-brake cable support tab removed, this tab will be re-located higher later in the install.

20220326_080455-X2.jpg



Removing the rubber bump stops, a pry bar makes quick work here.

20220326_080511-X2.jpg


20220326_080548-X2.jpg


20220326_080620-X2.jpg



Next up is removing the sway bar. The skid plate makes an awesome jack point.

20220326_081054-X2.jpg


20220326_081210-X2.jpg


20220326_081302-X2.jpg



Removing the brake line support on the spacer block in preparation to removing the block itself.

20220326_081437-X2.jpg


20220326_081454-X2.jpg



Removing the U-bolts.

20220326_081737-X2.jpg


20220326_081856-X2.jpg



And spacer removed.

20220326_081929-X2.jpg


20220326_081937-X2.jpg



Continued Below.....
 

Hodakaguy

Adventurer
Continued from above....

Removing the alignment pin that's holding the two OEM leafs together. Here I'm using some Aero-Kroil to assist in removing the nut, the bottom portion of the pin can spin freely so a pair of vise grips keeps it from spinning while the nut is being removed. Notice the clamp on the two springs that keeps the lower spring from dropping once the pin is removed.

20220326_082515-X2.jpg


20220326_082620-X2.jpg


20220326_083252-X2.jpg


20220326_083352-X2.jpg



The lower OEM leaf slides onto the Vancompass spring pack then the whole assembly slides up onto the upper OEM spring.

20220326_084325-X2.jpg


Coating the bolts on the upper spring retainers with Anti-Sieze before assembly, if they every need to be removed down the road this step will pay off.

20220326_090238-X2.jpg


20220326_090258-X2.jpg



Using C-clamps to compress the leaf springs then torque the alignment pin. Even a shot of my ugly mug! lol.

20220326_091012-X2.jpg


20220326_092257-X2.jpg



Spacer re-installed and new extended U-bolts installed and torqued to spec.

20220326_095727-X2.jpg



Relocating the E-brake cable tab. Here I'm holding the tab in place and marking the locations where I will drill the hole for the new attach point, the tab will attach to the lower bump stop base.

20220326_100506-X2.jpg


20220326_100535-X2.jpg


20220326_101158-X2.jpg



Holes drilled and painted.

20220326_102136-X2.jpg



Next up I'm installing the bump stop spacers to drop the OEM bump stop down. You hold the bracket in place and use a pen to mark the hole locations, you then use a center punch and a step drill to make a 1/4" hole in each location. Now you attach the brackets with the provided self tapping bolts.

20220326_102749-X2.jpg


20220326_103515-X2.jpg


20220326_103424-X2.jpg



Continued Below.....
 
  • Like
Reactions: MCX

Hodakaguy

Adventurer
Continued from above....

With the bracket bolted in place it's time to re-install the rubber bump stops. These are an extremely tight fit! After coating them with Windex to allow them to slip a bit they are inserted into the brackets. The first one I used a quick clamp and a flat blade screw driver to coax the bump stop into place. On the second bump stop I used a C-clamp and it was much easier!

20220326_103724-X2.jpg


20220326_103801-X2.jpg


20220326_104001-X2.jpg


20220326_104434-X2.jpg



Installing the spring pack on the drivers side.

20220326_111830-X2.jpg


20220326_112821-X2.jpg



Installing the second bump stop....Again a C-clamp worked MUCH better and the stop was installed in no time.

20220326_115228-X2.jpg


20220326_115430-X2.jpg



Installing the rear shock re-location brackets. Kiddo was out in the shop for a bit so I put him to work :)

20220326_120651-X2.jpg


20220326_120826-X2.jpg


20220326_121904-X2.jpg


20220326_122611-X2.jpg


20220326_122905-X2.jpg


20220326_125557-X2.jpg



Re-installing the sway bar.

20220326_125743-X2.jpg



E-brake cable bracket in it's new home.

20220326_125552-X2.jpg



Torquing the new Sway bar links in place.

20220326_130901-X2.jpg



Falcon shocks installed....excited to try these out on the road & trail!

20220326_133851-X2.jpg


20220326_135643-X2.jpg



Continued Below.....
 

Forum statistics

Threads
185,533
Messages
2,875,610
Members
224,922
Latest member
Randy Towles
Top