Foxwing...custom mount

Copasspupil

Observer
Since they really dont sell a mount for it, any ideas for those that have made one or thought of doing it? My RTT frame is set with 1 3/4” DOM tubing and I have to either use a 15” section of the same DOM tubing welded to a piece of flat stock. OR. I use 2x2 square tubing and do the same idea. I need to place the awning about 6” past the curve so it doesn’t not interfere the lights.

Anybody have an idea one way or another on this?
 

Attachments

Last edited:

ttengineer

Adventurer
What about modifying the factory brackets? Cut off the section on the truck side and weld on a new truck side mount that is radiused to the 1 ¾” DOM.




Sent from my iPad using Tapatalk
 

Copasspupil

Observer
What about modifying the factory brackets? Cut off the section on the truck side and weld on a new truck side mount that is radiused to the 1 ¾” DOM.




Sent from my iPad using Tapatalk
That might work. I could take a section of scrap DOM material weld it to the frame with just an extension on the end then clamp it that way. I’ll go check. Thanks.
 
Top