Here are some updates. Sorry, there aren't any exciting pictures. It's just alot of routine work. Cutting, welding, pre-fitting. Here is the vision for the rear tailights and storage in rear bumper.
To finish the work on the basement and bottom of the camper, I took the camper off and flipped it upside down. I replaced the floor in the mudroom with new 3/4 inch birch plywood. I re-fiberglassed everything and bedlined it.
While the camper was off, I finished building the subframe for the rear winch. I boxed the frame rails and cut off the original cross member for the spare tire, which made just enough room for the second gas tank.
That's all for now.
To finish the work on the basement and bottom of the camper, I took the camper off and flipped it upside down. I replaced the floor in the mudroom with new 3/4 inch birch plywood. I re-fiberglassed everything and bedlined it.
While the camper was off, I finished building the subframe for the rear winch. I boxed the frame rails and cut off the original cross member for the spare tire, which made just enough room for the second gas tank.
That's all for now.