e61's 2020 Armada/Patrol Y62 Build

e61overland

Member
If Iron man 4x4 ever gets the Patrol/Armada shocks back in stock. Haven't been on the US site in ages.
Yep, there are a few other shock options. They should all work as long as the springs are the correct length. Like the bilsteins.


Sent from my iPhone using Tapatalk
 

e61overland

Member
Yep, there are a few other shock options. They should all work as long as the springs are the correct length. Like the bilsteins.


Sent from my iPhone using Tapatalk
Also, if you add longer shocks upper control arms are necessary to allow for the droop. Basically you won’t get the benefit of the longer shocks. Just the improved ride quality.


Sent from my iPhone using Tapatalk
 

e61overland

Member
I had some time to kill and clicked through EVERY Y62 page on patrolpart.au looking for interesting things. There are many items that would require some modifications to work on the USA spec rigs, but many that would likely bolt right on. Enjoy...

Parts


https://patrolapart.com.au/product/...tray-for-nissan-patrol-y62-v8-56l-petrol-vk56


https://patrolapart.com.au/product/genuine-safari-snorkel-for-nissan-patrol-y62-vk56-v8-petrol


https://patrolapart.com.au/product/lra-120lt-long-range-auxiliary-fuel-tank-fits-nissan-patrol-y62


https://patrolapart.com.au/product/...ecovery-tow-points-for-nissan-patrol-y62-pair


https://patrolapart.com.au/product/...left-tyre-carrier-right-twin-jerry-can-holder


https://patrolapart.com.au/product/false-floor-setup-suits-nissan-patrol-y62-rear-cargo-area


https://patrolapart.com.au/product/ontrack-4x4-rear-camber-correction-bush-kit-for-nissan-patrol-y62


https://patrolapart.com.au/product/arb-summit-sahara-bar-suit-nissan-patrol-y62-series-4-2018on


https://patrolapart.com.au/product/...-pair-for-nissan-patrol-y62-arb-predator-bars


https://patrolapart.com.au/product/...hatch-suits-nissan-patrol-y62-rear-cargo-area


https://patrolapart.com.au/product/...-king-brand-coil-spring-for-nissan-patrol-y62


https://patrolapart.com.au/product/...an-patrol-y62-std-height-with-front-bar-winch


https://patrolapart.com.au/product/...e-controller-for-nissan-patrol-y62-series-1-5


https://patrolapart.com.au/product/...-lift-kit-8mm-16mm-24mm-for-nissan-patrol-y62


https://patrolapart.com.au/product/...-motor-mounting-bracket-for-nissan-patrol-y62


https://patrolapart.com.au/product/...battery-tray-for-nissan-patrol-y62-cargo-area


https://patrolapart.com.au/product/...for-tyre-carrier-suits-nissan-patrol-y62-s4-5


https://patrolapart.com.au/product/...62-4wd-mode-selector-switch-for-transfer-case


https://patrolapart.com.au/product/...cker-top-and-rear-loop-suit-nissan-patrol-y62


https://patrolapart.com.au/product/...acket-kit-with-template-for-nissan-patrol-y62


https://patrolapart.com.au/product/...atches-suit-nissan-patrol-y62-rear-cargo-area


https://patrolapart.com.au/product/...l-y62-suits-rear-14-panel-with-arb-compressor


https://patrolapart.com.au/product/under-false-floor-agm-style-battery-tray-for-nissan-patrol-y62


https://patrolapart.com.au/product/deep-cast-transmission-pan-for-nissan-y62-patrol-7-speed-re7r01a


https://patrolapart.com.au/product/...2-centre-fridge-console-tan-interior-colour-r


https://patrolapart.com.au/product/...-motor-mounting-bracket-for-nissan-patrol-y62


https://patrolapart.com.au/product/...na-bracket-drivers-side-for-y62-nissan-patrol
 

e61overland

Member
Swapped the 4x4 control module for fun. The dial and traction button work, which is what I was expecting. If/when I import the patrol rear diff with e-locker I will chase down which additional modules and harnesses I need to swap to get it all working.

Oddly, there is a placebo effect just by having a locker and mode selector buttons. Emotionally, I feel like I’m a better off-road driver ;-) Hey, isn’t much of what we do to our trucks driven by our emotional needs?




Sent from my iPhone using Tapatalk
 
Last edited:

e61overland

Member
Do any of the throttle mapping modes work?
Not as far as I can tell. But it could possibly be working and it’s just not showing in the LCD because the software version on the dash isn’t listening for those messages. Who knows at this point. But I hope to tinker and figure it out over time.


Sent from my iPhone using Tapatalk
 
Top