Building our box out of wood?

MTVR

Well-known member
Weve got about 5 gallons so far. At 70 square feet per quart, per coat, It should take approximately 15 gallons total, to do three coats inside and out.
 

ATCws

New member
Idasho, do you have a build thread for your flatbed camper? thx


With that wall thickness you can easily create a thermal break by staggering studs/framing.

Just replace the 2x4's with 1x2's or 2x2's, and the insualted with rigid XPS foam.

staggered-stud-wall.jpg


For ceiling, you could do a truss'ed design to maximize the thermal break...
Many RV companies already do this, but with a radius/arch. You could easily make them flat

Abs-Roof-Trailers-web-transparent.png


Like this, but done horizontal.

021286080a-main-700x583.jpg



I considered these early on, but my camper just isn't large enough to justify it.
Such a thick wall really soaks up interior volume, when you already dot have much!

With a large camper, I feel the benefits are there....
[/QUOTE
 

Forum statistics

Threads
185,527
Messages
2,875,546
Members
224,922
Latest member
Randy Towles
Top