285/75-16 ko2 psi suggestions

[AutoXSS]

With my Duratracs, the previous owner ran them at 31psi for 2 years. They had already been worn funny by the time I got the rig. They are outrageously noisy. My new ko2's arrive tomorrow and want to make these last an acceptable time.

I ran the duratracs @ 41psi on 8" wheels with medium OME lift. I don't really weigh down much when we hit the trails or head to Colorado, Stock bumpers. I had the previous gen BFG AT's on our Excursion. Ran those @ 39front 42 rear(no rear sway). Does 41psi sound about right to start out with?

 

[(none)]

Sure, start with that. Then do the chalk test to verify they contacting the road evenly and adjust from there.

 

[broncobowsher]

I would probably start at 35. That is usually a good street pressure on Nissan trucks with normal sized tires. That isn't too far off stock.

 

[StomperNJ]

I always run my KO2s at 35 on the street.....i generally drop down to 20 off road and 11 when I'm in the sand.