buellconvert
Active member
Good to know, I haven't seen any moisture in mine, but I'll definitely be taking a look to see if there's an issue, we get a lot of rain here in North Carolina and I don't need thatThe third brake light was removed and there was easy 2 ounces of water inside
One of the three bulbs was blown out - likely from heat and moisture
The cavity behind the third brake lenses was pretty damp. I am letting it all dry out overnight
The areas for the two mount screw sure sits at a bad angle and seems to also hold water. No gasket either for the mounting screws.
The gasket for the third brake light is foam - which will absorb and hold moisture
I am using black RTV around the foam gasket area and clear 100% silicon around the lense
Terrible quality. Not pleased
Sent from my Moto E (4) Plus using Tapatalk