seriousseries
Observer
Looking to sell to start a Jeep Build
This is a great truck to mount a slide in camper on.
Truck Details:
2005 Silverado LS regular cab.
LLY duramax with 5 speed allison trans.
Push button 4/4 with locking differential
Grey cloth interior & Grey carpet in perfect condition
Power windows, Locks, Tilt. steering wheel controls, A/C & CD
Power, heated, signal towing mirrors.
Just over 100,000 miles. Still driven daily
Maintenance
Change oil every 3500 with rottella T 15 40
Change fuel filter every second oil change
change air filter each spring
Had transmission flush and filter at 60,000 (have receipt)
6 toyo open country tires about a year old (have receipt)
New rear pads & rotors (Have receipt)
New Crank Sensor (have receipt)
Flat Bed Body details
Custom Made New England Truck Design aluminum flat bed http://www.road-craft.com/
HD ibeam construction. perfect for a sander or spray truck
48" Protech top boxes and 24" under body boxes. All with matching lock sets
All clear lens LED lights. With double insulated wiring harness.
Rigid industries dually LED floods on back rack
Rigid industries dually LED diffused on rear corners
Custom switch panel
HD D-rings on the corners.
Channel attached to top boxes to add a bed divider (as shown)
Truck is in mint condition inside and out and drives very tight and very smooth
This is a great truck to mount a slide in camper on.
Truck Details:
2005 Silverado LS regular cab.
LLY duramax with 5 speed allison trans.
Push button 4/4 with locking differential
Grey cloth interior & Grey carpet in perfect condition
Power windows, Locks, Tilt. steering wheel controls, A/C & CD
Power, heated, signal towing mirrors.
Just over 100,000 miles. Still driven daily
Maintenance
Change oil every 3500 with rottella T 15 40
Change fuel filter every second oil change
change air filter each spring
Had transmission flush and filter at 60,000 (have receipt)
6 toyo open country tires about a year old (have receipt)
New rear pads & rotors (Have receipt)
New Crank Sensor (have receipt)
Flat Bed Body details
Custom Made New England Truck Design aluminum flat bed http://www.road-craft.com/
HD ibeam construction. perfect for a sander or spray truck
48" Protech top boxes and 24" under body boxes. All with matching lock sets
All clear lens LED lights. With double insulated wiring harness.
Rigid industries dually LED floods on back rack
Rigid industries dually LED diffused on rear corners
Custom switch panel
HD D-rings on the corners.
Channel attached to top boxes to add a bed divider (as shown)
Truck is in mint condition inside and out and drives very tight and very smooth
