1986 GMC S-15

Andrew_S

Observer
^ The only real goal is to get out, anything on top of that is a bonus.
More importantly than a goal, we definitely have a cut off, that's typically when the freezers (2) are full.
This year, we have back-back-back guests/family visiting from Oct-Mar.... So we were able to justify harvesting a bit more.

quick update,

All cleaned up and under cover for the winter.
51741036679_7050671514_c.jpg



Serious t-case leak fixed on the '86. Note to self, always check the depth of install for seals, don't assume flush is good.
51739589892_178248ee8c_c.jpg


Annual Christmas tree run,
51740397611_0ec596076d_c.jpg


and it's that time of year again!
51740631298_33d2b33903_c.jpg


First time camping in December, friggin loving it.
51741050759_4ce6c73d2b_c.jpg


Total game changer for ice fishing. So many first light - prime time opportunities.
51740631728_c863b4ccff_c.jpg


51741284455_e2a3b216dd_c.jpg


51740398241_cc3c2359d9_c.jpg


51740631698_c5c929c554_c.jpg


I'll have to hit up some new lakes. I'm afraid my go-to either winter killed or had a really bad algae bloom this year.
51741284480_456d74d479_c.jpg


51741299160_2119770988_c.jpg


Anymore snow and these roads will be cut off for us.
51741299185_3f01681b1f_c.jpg


51741036999_28fbd133f9_c.jpg


51740398016_bd14b87f9b_c.jpg


Most local lakes are not safe yet. Warm temps and a lot of snow insulating the ice, makes for really unsafe conditions.
51740631708_6962b93187_c.jpg
 

Andrew_S

Observer
Definitely^ It's been a heavy year for snow this December.

A few quick updates

Junk yard find
51796156799_cecf1674dc_c.jpg


51796517795_a37e084766_c.jpg


Glass on all 4 sides now
51795788911_d890034e30_c.jpg


Got the badges in the mail. The guy did an awesome job
51794839272_60b9fa91af_c.jpg


Back out on the hardwater
51796159459_ce330b5cfd_c.jpg


51795788961_331212a84e_c.jpg


51794841682_4c79624a56_c.jpg


51796159394_09c307ea18_c.jpg


51794842422_ca8787b6b6_c.jpg


51796159524_0f6a286c46_c.jpg


The wifey is picking up ski touring. It works great, I can fish and she goes touring.
51795788276_4f9f4c275b_c.jpg


Confirmed the camper works good at temps down to -25C or -13f.
51794839332_ccba312775_c.jpg


51794838962_95a3a0ac15_c.jpg


another day another lake
51795785906_204d1389c9_c.jpg


8" of crystal clear ice
51795788876_09edcffef6_c.jpg


Another outing

bedded cow moose
51798348269_62bd1ab2ef_c.jpg


I never really considered blowing snow being an issue with putting together the gasketing on the camper. Sometimes you just get lucky.
51798102543_e1aea43aa8_c.jpg


Dragging this sled sure makes a guy feel fat.
51798348324_12a9bd6500_c.jpg


100% my happy place
51798711360_b8708106bc_c.jpg
 

Piston broke

New member
Hey Andrew,

I randomly found your camper searching high and low for home built hard wall pop-ups (few and far between) since I’ve been back-burner planning and daydreaming of building one for a few years now.


the big budget, gadget happy “overland” trend has gotten pretty crazy lately. Nice to see a return to the essentials, and getting more field time than most of the big budgets anyway.Faster take down and setup and better poor weather protection than a tent, basically storage and hard walls and not sleeping on the ground, while keeping better off road capability than a big hard wall camper are the happy medium I’m looking for

Yours is an awesome example of ticking the right boxes.

I came and started mid thread for the camper. Went back and read from page 1 through the entire thread out of curiosity.
Thanks for taking the time and effort to document and post your build and trips! It’s a Huge effort to keep updating, but it’s much appreciated! You’ve re-kindled my desire to get going and get out there again next summer.

thanks and if you care to keep us posted for whatever comes along, we’re happy to follow!

I grew up out that way, and moved to the prairies a while ago, but your pics sure make me keen on next summers trips west.
 
Last edited:

Andrew_S

Observer
^Thanks for the good words.
You hit the nail on the head, build criteria was:

Quick/Easy setup/takedown
Dry & warm
Non compromising Truck - i.e. -Fit a moose in the bed
Light-ish
Durable

Depending on where you are, the prairies have some great fishing lakes! Thanks again and good luck getting out there.



The windows look great. Excellent job recycling those.

As always, I thoroughly enjoy your pictures and adventures.
Appreciate it thanks. Need to get that window installed and tinted soon.


I'm loving having the different age classes of game on the wall. It's so neat to be able to see the physical changes in the skulls as they grow.
Next year we need to get a 3x3 mulie or a 5x5 lol.
51847332763_f19a257bdf_c.jpg


4runner starter needed some love - contacts & rotor.
51847332803_b5d2cf490b_c.jpg


51847593499_c2232809df_c.jpg


Unfortunately it didn't fix the issue. Nothing like doing a ************ job twice...
51847919415_a9c3e4b216_c.jpg


Buddy has some striping left over - just slapped it on for a visual. I've been trying to get something better made but the prices are unreal.
51846298572_1e83d5f9a1_c.jpg


Finally got around to installing the brake bias adjuster.
51847331288_1193b1a305_c.jpg


Modified bracket
51847271396_03c9b9f1c2_c.jpg


All it needs now is some nice stainless hardware
51846298102_a7ac1d9150_c.jpg


I friggin love this mightvac. Bleeding brakes is so easy and a one man job now.
51847271231_0a873be8cb_c.jpg



Decided it was time to start putting this thing together. Gapping rings for boost.
51847271201_2ac9ea339b_c.jpg


51847919135_f16f176a09_c.jpg


Top ring gap 0.025"
Second ring - 0.022"

51847271251_d6266c7b6b_c.jpg


Crank going in,
51847332783_d8e5f5b757_c.jpg


51846299992_cf84524893_c.jpg


51847271666_a2d637a47b_c.jpg


Getting there
51847592019_10858309b1_c.jpg


Custom ground cam going in
51847591969_2b5eaa8fc5_c.jpg


It's nothing to radical, .433 lift & .249 duration, should make really good torque.
51846298467_c24702becf_c.jpg


More to come soon.
 
Last edited:

ITTOG

Well-known member
It has been 30 years since I have built an engine. Seeing your pictures brought up great memories with my grandfather when we were working on cars all the time. I would buy, rebuild, sell, repeat! Each time I bought it was a better or more expensive car. Made a lot of money doing that. Great times. Thanks for sparking the memories.
 

ThundahBeagle

Well-known member
I started reading this thread, couldnt help "like"-ing near everything on the first several pages. Skipped to the end to say that I have a 14 Sierra and love it. But a friend of mine had a first gen chevy S-10 back in 1992 or so. Very similar to yours stock. I'd love to find a nice example and do similar things.

As others have said, this is Overlanding. We just used to call it camping. But you are doing it right!

Nice work and some of the most gorgeous scenery I have ever seen. Love to get up to BC some day
 

Andrew_S

Observer
It has been 30 years since I have built an engine. Seeing your pictures brought up great memories with my grandfather when we were working on cars all the time. I would buy, rebuild, sell, repeat! Each time I bought it was a better or more expensive car. Made a lot of money doing that. Great times. Thanks for sparking the memories.
It's my kind of meditation!

I started reading this thread, couldnt help "like"-ing near everything on the first several pages. Skipped to the end to say that I have a 14 Sierra and love it. But a friend of mine had a first gen chevy S-10 back in 1992 or so. Very similar to yours stock. I'd love to find a nice example and do similar things.

As others have said, this is Overlanding. We just used to call it camping. But you are doing it right!

Nice work and some of the most gorgeous scenery I have ever seen. Love to get up to BC some day

'14 was a good year for those trucks! It's definitely camping for us. Thanks, appreciate the good words.

Quick side project Saturday,
51852626249_24178769ba_c.jpg


51852302696_92ff6b0d42_c.jpg


51852302611_1732eb8946_c.jpg




51851335367_b823519c9e_c.jpg


51852626219_d7e2ccfe14_c.jpg


51852955505_66d80248f1_c.jpg



Finally got motivation to knock this one off. So happy it's done now.
51852378308_9c8c440d46_c.jpg


51852302621_1d9679fcd3_c.jpg
 

Piston broke

New member
Nice work on the cart!

I have a couple questions if you don’t mind.

I went back and looked over the pages with the actuator install and seals, but couldn’t find anything about tracks for the upper and lower to ride on. Did I miss them, couldn’t see anything in the pics either. Or is the upper shell just located by the actuators and main wiper/seal while it’s travelling up and down?

I’m relatively comfortable doing fab work with steel but have avoided getting into welding aluminum. Is a spool gun for the mig adequate for the light material you used for the frame in this thing? Control problems with heat or anything with the light tubing? Adding a spool gun would be much cheaper than jumping to a tig, and probably the best (or at least most practical) way to get going.
 

Andrew_S

Observer
The upper box wraps around the back of the inner box by about 11/2" on either side. I secured two pieces of hdpe as slides to control the forward/back movement while lifting. I also installed 4 tabs against the actuators that keep them from tipping more than 1" in either direction.

I opted out of getting optically synchronized actuators (my mistake) because I was intimidated by the wiring and controller.

The difficulty with a track system is the actuators need to be synchronized very closely to match the tolerance of the track. These actuators with such a long stroke, can be out as much as +/- 1" at full extension. I ultimately decided to forgo the track because it wasn't needed and added complexity/weight.
In short, you're correct the upper box is located by the seals, the actuators and that it physically wraps around the back of the lower box at all times.

I would never tig a camper unless I had an absolute ton of time & were fixated on perfect welds.
I used a variety of material varying from 0.060"tube up to 3/16" plate. The bulk of the structure was either 1.5x1.x5x0.060 Square tube SC, 1"x1"x.125" square tube RC, for the main structural components 1.5"x1.5"x.1875" square tube RC (total overkill, would go lighter to save weight on the next one).

I would definitely start picking up the tig for anything lighter than .050. The 0.060 tubing was a non issue with the spool gun set up and the right settings. This camper was my first time ever welding aluminum. I practiced on a variety of scrap pieces until I felt comfortable. If you have a background with Mig, a lot of it translates. My experience is a spool gun only really likes pushing the puddle, slight angle from 90* and preheating thicker material helps a lot if you're after that perfect weld.
The spool gun is definitely the way to go for production and bang for your buck. My .02, hope that helps.
 

N.Penley

Member
Andrew,
I have to offer another piece of advice after reading this the 2nd time.

Don’t make that camper too comfortable or you’ll be strapping a baby seat in there.

Enjoy every moment you spend with your wife in that truck. You are blessed to have a woman that enjoys hunting, fishing, and being outdoors and doesn’t seem to mind getting her hands dirty. Women like that are hard to find. Buy her something nice next time your out on a parts run. Lol.

Speaking of parts...Whats next? SAS? Interior mods?


Sent from my iPhone using Tapatalk
 

SFP

Member
Enjoy every moment you spend with your wife in that truck. You are blessed to have a woman that enjoys hunting, fishing, and being outdoors and doesn’t seem to mind getting her hands dirty. Women like that are hard to find. Buy her something nice next time your out on a parts run.

I second what Andrew said.

I'm afraid to ask how many of us are "single" due to our love of the back country, wheeling and overlanding ;)
 

Andrew_S

Observer
^ wrong type of girl if their not interested in this stuff in my opinion.

Andrew,
I have to offer another piece of advice after reading this the 2nd time.

Don’t make that camper too comfortable or you’ll be strapping a baby seat in there.

Enjoy every moment you spend with your wife in that truck. You are blessed to have a woman that enjoys hunting, fishing, and being outdoors and doesn’t seem to mind getting her hands dirty. Women like that are hard to find. Buy her something nice next time your out on a parts run. Lol.

Speaking of parts...Whats next? SAS? Interior mods?


Sent from my iPhone using Tapatalk

Sheesh, this will be a big problem if we have kids here soon. Reg cab life does not align with child life haha.

Whats next - I will likely pick away at everything slowly and accomplish nothing haha. Finish out the exterior, interior and I'm guessing SAS. Turbo Motor after that. Probability of everything happening in that order is likely slim.

I was down for about two weeks with covid. Then I pinched a nerve in my neck which cost me another week. Picked away at a few things though.

I built a cross member for the front of the bed to help carry the extra load of the camper. The stock bed cross members aren't only sitting on 1.5" mount. Now the weight is divided up across the entire cross member.
51884570413_58fe80595b_c.jpg


Love burning in thick stock like this left over tubing. Another argument for spool gun when whipping something out quickly.
51884498686_182919a2d7_c.jpg


First time using one of these ultra sonic cleaners, does such a great job.
51885144640_8000c4f5df_c.jpg


51884594538_4723d71177_c.jpg


Soaking in an oil bath until I can assemble the top end.
51885144545_2ddcf93519_c.jpg


Back to the front window, decided on a final position.
51885144615_c6cfd60e9a_c.jpg


had both front & rear window tinted
51884818884_8b421ff9bc_c.jpg


Cut the center support out of the front wall. God damn does Sikaflex ever stick.
It was everything I had to pry and cut out the old support. Forget about rivets, all a guy needs is sika.
51884571023_14a25899d4_c.jpg


So happy with the final product. Looks so much more finished with glass on all 4 sides.
51883528007_361ed6faec_c.jpg


Meeting with a guy on Friday to get some printed vinyl stripes made. The stripes and badges should be on shortly.
51884818969_2f2e8df13e_c.jpg


More of the same old hardwater fishing,
51884570283_55a53c12fa_c.jpg



51884498676_de9166640a_c.jpg


51884499421_c78abb0bfa_c.jpg


My favourite fish to eat. Fish tacos tonight!
51884818954_61bb68eb63_c.jpg
 

Forum statistics

Threads
185,534
Messages
2,875,621
Members
224,922
Latest member
Randy Towles
Top