1983 FJ60 Land Cruiser rebuild and upgrade

LuisGW

Active member
Thanks. I am trying to do that. I have an excel spreadsheet where I am trying to keep a tally of everything. The motor is from an LS from a 2007 Chevy avalanche so most of the motor parts can be found by looking for that but it has a custom cam and lifters.
 
Last edited:

LuisGW

Active member
Fuel tank is in and fuel lines partially run. Scavenged throttle sender from older Silverado pick up and will modify to accept original Toyota peddle.

IMG_20191015_135216978.jpg
 

LuisGW

Active member
Well I am rebuilding the instrument console. I am using a speedhut tach and I have 3D printed a new mounting bracket. I also found that two of the bulb housings were badly melted so I 3D printed new ones.
I am going to splice the new tach wires into the old tach plug so that it will plug into the old connection the same as the original. Red - Tach signal, Black/Yellow - Ign 12V, Black - Ground and the other two for the light.
 

Attachments

Top