04 2500 suburban build

60beforetruck

Active member
Front springs and axle are in. I left the springs bolted to the axle and used a pallet jack to slide the assembly under the suburban. Went pretty smooth. I also got the steering box swapped from over. PSC with hydro assist.
 

Attachments

  • 20190729_180922_resize_63.jpg
    20190729_180922_resize_63.jpg
    397.6 KB · Views: 142
  • 20190729_180908_resize_70.jpg
    20190729_180908_resize_70.jpg
    1.7 MB · Views: 146
  • 20190802_232425_resize_50.jpg
    20190802_232425_resize_50.jpg
    1.9 MB · Views: 145

fl0w3n

Observer
Dang, that was a bummer when I saw your flop from FSI
Glad to see you rebuild!

Any reason you didn’t want to just do a cab swap or fix the Duramax?
 

60beforetruck

Active member
Dang, that was a bummer when I saw your flop from FSI
Glad to see you rebuild!

Any reason you didn’t want to just do a cab swap or fix the Duramax?
I had a cab lined up before I made it home from Utah. Thought about new cab, front clip and flat bed. I always wanted a Duraburb and I just found the right suburban. Same year, color, and trim package. Your bed is warm when you go to bed in the suburban. Truck was comfortable but, it was cold sometimes when you first get in.
I also like how you don't see a lot of lifted suburbans running around.
 

60beforetruck

Active member
Before I put the shock hoops in I replaced the motormounts, both sides where busted. Replaced the stock manifold with a set of JBA shorty headers. Also went ahead and replaced my plug wires with a set of accel ceramic.
 

Attachments

  • 20190725_210648_resize_28.jpg
    20190725_210648_resize_28.jpg
    507.7 KB · Views: 81
  • 20190724_184326_resize_51.jpg
    20190724_184326_resize_51.jpg
    407.5 KB · Views: 86
  • 20190814_204250_resize_58.jpg
    20190814_204250_resize_58.jpg
    2 MB · Views: 94
  • 20190803_210317_resize_91.jpg
    20190803_210317_resize_91.jpg
    2 MB · Views: 94
  • 20190803_210312_resize_99.jpg
    20190803_210312_resize_99.jpg
    1.9 MB · Views: 91
  • 20190822_200152_resize_23.jpg
    20190822_200152_resize_23.jpg
    1.8 MB · Views: 86
  • 20190822_200137_resize_80.jpg
    20190822_200137_resize_80.jpg
    530.8 KB · Views: 84

fl0w3n

Observer
I had a cab lined up before I made it home from Utah. Thought about new cab, front clip and flat bed. I always wanted a Duraburb and I just found the right suburban. Same year, color, and trim package. Your bed is warm when you go to bed in the suburban. Truck was comfortable but, it was cold sometimes when you first get in.
I also like how you don't see a lot of lifted suburbans running around.

Right on. I can relate, I’ve got an 02 Duramax ZF6 and I’ve got an 02 Suburban 2500 but it’s got the 6.0.
I may someday follow in your footsteps.
I’ve always waffled back and forth on lifted burbs after gmt400... the rear proportions just seem kinda off... but there’s a lot of awesome things about a Burb like you mentioned.

Curious, what was your plan for the cab and registration/vin, were you going to switch to the new cabs vin and registration or keep your original? I also have wondered about cab swaps, my Duramax has 350k miles on it and it’s a WT strip model. I’ve wondered about swapping a newer cab on, but I need to keep my original VIN for smog reasons.
 

60beforetruck

Active member
Right on. I can relate, I’ve got an 02 Duramax ZF6 and I’ve got an 02 Suburban 2500 but it’s got the 6.0.
I may someday follow in your footsteps.
I’ve always waffled back and forth on lifted burbs after gmt400... the rear proportions just seem kinda off... but there’s a lot of awesome things about a Burb like you mentioned.

Curious, what was your plan for the cab and registration/vin, were you going to switch to the new cabs vin and registration or keep your original? I also have wondered about cab swaps, my Duramax has 350k miles on it and it’s a WT strip model. I’ve wondered about swapping a newer cab on, but I need to keep my original VIN for smog reasons.
I was just going to use my old VIN and not worry about it. Georgia is easy to deal with. I also live in a emission exempt county.
 

fl0w3n

Observer
I was just going to use my old VIN and not worry about it. Georgia is easy to deal with. I also live in a emission exempt county.

Gotcha. I’m sure it’s exponentially more complicated in California. I’m mainly worried about if I ever went to sell it.

Look forward to seeing it when it’s done!
 

60beforetruck

Active member
Got the shock hoops and front shocks installed. Bilstein 7100 series. Also pulled the transfer case from the duramax and pulled the front slip yoke eliminator out to put in the 246.
 

Attachments

  • 20190828_205119_resize_54.jpg
    20190828_205119_resize_54.jpg
    397.4 KB · Views: 107
  • 20190903_203150_resize_17.jpg
    20190903_203150_resize_17.jpg
    486.6 KB · Views: 110
  • 20190825_210543_resize_63.jpg
    20190825_210543_resize_63.jpg
    1.9 MB · Views: 102
  • 20190911_181000_resize_59.jpg
    20190911_181000_resize_59.jpg
    737.1 KB · Views: 101

60beforetruck

Active member
Ran up the road to Transfer Case Express and picked up a fresh 246. While I was there they installed the slip yoke just so I wouldn't have to break the case apart again. Nice knowledgeable crew that I would do business with again.
Got the case installed and then my rear springs arrived. 8 week lead time from Atlas. At first I thought I could run my duramax rear springs or have them re worked. Not happening. Duramax spring 64" suburban is 60, so I ordered new rear springs. Worst part of the spring is the fuel tank on drive side frame rail is blocking the front spring bolt. No big deal just undo the tank straps and hope that the tank is not full.
I also swapped in the AAM rear from the Duramax. This thing is a giant compared to the stock 14 bolt. You can feel the weight just rolling it around. The tracking bar bracket near the passenger side spring pad will most likely need to be reworked. I will also have to redo the u bolt plate/ airbag pad.
With any lift new drive shafts are in ordered. After 8" of lift and rear end swap, the new drive shaft is 2" shorter then the stock one. First time I ever put a shorter drive shaft in a lifted truck.
 

Attachments

  • 20190913_123100_resize_26.jpg
    20190913_123100_resize_26.jpg
    1.5 MB · Views: 108
  • 20190914_173506_resize_38.jpg
    20190914_173506_resize_38.jpg
    1.6 MB · Views: 103
  • 20190915_135139_resize_88.jpg
    20190915_135139_resize_88.jpg
    1.7 MB · Views: 103
  • 20190914_173608_resize_72.jpg
    20190914_173608_resize_72.jpg
    2 MB · Views: 109
  • 20190915_150001_resize_83.jpg
    20190915_150001_resize_83.jpg
    1.6 MB · Views: 152
  • 20190915_145926_resize_31.jpg
    20190915_145926_resize_31.jpg
    1.4 MB · Views: 153

FBJR

Adventurer
What rear spring are those? I just got deavers for my 06 dmax that's getting a lift next month.
 

60beforetruck

Active member
Looking good! Are you going to drive it before the engine swap?
Yes, I want to play wit the big block a little.
What rear spring are those? I just got deavers for my 06 dmax that's getting a lift next month.
The rear springs are 8" Atlas premium ride. They are a soft spring but, I run air bags so it is kind of nice.
What’s the tire size in those pics?
The tires currently on the truck are 37x12.50x20 SSR. They really measure out at 35". I have a set of 38x14.5x20 I run some times. You can stuff the 35 into the fender if your not careful.
 

Forum statistics

Threads
185,531
Messages
2,875,589
Members
224,922
Latest member
Randy Towles
Top