Search results

Simple solution would be a sliding bolt latch on one or both sides. Just make sure you get one that can't rattle closed going down the road and lock you out. If they're the same latches as the barn doors and hatches use they come out from the inside with a #2 Philips real easy, just carry a...

I run the HS2000 in my 6ft bed midsized truck, it can increase air temp by about 60°F running constantly, the air heats up fairly quickly(maybe 20-30 min to 55-60°F when its about 20°F out), but the thermal mass of all the cold gear take all night in cold temps and the aluminum of the camper and...

255/75R17 or 265/70R17 should both fit, and in a P metric won't ruin fuel economy. I recommend buying whatever AT tires the shops in your area stock so if you need a replacement you're not waiting for a week. For me that is Toyo, Falken, or Cooper. Though they rarely have the 255/80R17 tires I...

I run a 4" mattress with the extra height(10"). My bedding has to come down or I push it to the very front and don't fully slide the bed in. My mattress is very firm 2" latex and 2" of 50lb foam so it barely compresses, I have the older hinge design and there is barely room under it for a 4"...

So I ran them along the underside of the roof to the rear. Then attached them to the hinge like the 3rd brake light wiring is. I do have the older aluminum tubing style popup. I don't have a photo, but something like this, but in the rear.

A bulkhead fitting would work, might be finnicky to install though.

While I'm partial to D40 CC LWB Frontiers. The colorado and canyon are only about 10% more expensive used, they aren't Taco priced. I think there are more CC LWB trucks too. Might be easier to find than Frontier.

I'm using foamfactory.com 2" Lux HQ foam and 2" Dunlop Latex toppers for a 4" mattress. It only fits in the 10" cabover by pulling the doubled up mattress back so the hinge doesn't hit it, bedding gets pushed up under the hinge in front of the mattress. The latex is very heavy and it's fairly...

I haven't updated in a while. Here's the short list for now. Propex heater installed, working great Insulation is in except for the sides/front of the truck bed. Still need to cover the installation with some kind of cloth. 10lb propane tank on an Expedition Essentials mount installed on rear...

I did worked great all winter.

Here are some photos. Lower doors are attached by those three bolts into the rivnuts on the lower door. Propex mounted in my partially finished cabinet. The box in the upper left of that wiring mess is a DC thermal 50A heater I installed today, to preheat the camper and gear, so the propex...

Thanks! I'll get some photos of the doors tomorrow. I don't miss the tailgate at all, my last truck had a fiberglass canopy and closing the tailgate behind me was a pain that I don't miss. It's also very nice being able to use the bumper as a step into the back, I'd need a stool if I still had...

Not sure how I missed this thread. Lots of good info. Here is my truck build, gets into the camper about page 4, but I haven't put too much of the camper build up yet, too much fun getting out using it and working over time to pay for all the gas. I can second Ovrlnds great communication and...

Vagabond says 315# for a 5ft base model now. I'm sure they can hit 450+lbs with windows, racks, and such on a 6ft bed. I know Ovrlnds can be 275# for a 6ft bed, Mine's around 300#'s, but I got full barn doors to delete my tailgate, so it only added about 270#'s before building it up with solar...

Nice to see another company supporting Frontiers. Not sure how they figure they're the lightest 4 season canopy camper. 390-450# is pretty heavy for a canopy camper, Ovrlnd, Vagabond, and GFC all come in between 250-350# for a mid sized. Even the hard side Hiatus is 460-480# on a midsized truck...

I think the M-55 and Cooper S/T Maxx are the only studdable aggressive AT tires out there, other studdable AT tires aren't as agressive. I don't see any reason to get them unless you're studding them. They're louder, heavier, and more expensive that more modern AT offerings, don't last any...

They're made in china, tank is actually 3/8 npt inlet and 1/4 npt outlet.

I know this is an older thread, but in case you're still waiting on sherpa 4x4. I had this same issue with mine(my fault), and bought this off amazon. You'll need a 3/8" npt coupling as well. I also had issues with the head bolts coming loose, it would no longer go past about 80psi, so it...

Air tanks do almost nothing to help for airing up tires, they're nice if using air tools, even just an air nozzle. Also most people use a 2-5gallon tank, unless they plan to run lots of tools and have 100% duty cycle compressors. Most compressors, like your viair don't recommend over a 5 gallon...

I only ran it stock for about 1500mi, before I put on the 255/80R17 tires and winch bumper. So only 500 miles of highway and 150 miles of dirt back roads, rest was hilly in town mileage. Braking felt like it was slightly diminished, acceleration was hurt worse but it still gets up to speed on...