Search results

  1. T

    Toyota Chinook 4x4 Wheel Well Clearance

    I would suggest keeping the wheel wells, since you are working with the stock chassis and stock placement of the chinook shell. The Tunook got away with a flat floor because it was mounted to a custom platform that was built on top of the Tundra frame which set the floor of the shell higher off...
  2. T

    Tunook Build Has New Life

    I have not found any stress cracks in the shell or frame. The subframe is made from 1/4 2×2 steel, so it is very stiff and forces the suspension to do all the flexing. It has held up great.
  3. T

    Tunook Build Has New Life

    It was a longtime ago and I cannot remember where I bought those fenders. I recall they are custom. I had to supply the measurements and they build them based off of that. I found the place searching the internet for custom aluminum fenders. I will do some digging through my old receipts to...
  4. T

    Tunook Build Has New Life

    Congrats on your new chinook, I hope. The interior on this rig is just as it is shown in pictures previous in this thread. We did not mount a stove permanently inside. We prefer a Colman popup stove that we use 99% of the time outside. We could use it inside but we like the versatility. We...
  5. T

    Trailer project

    I have an early telephone service bed box. I believe these came on 1940s and early 50s ford picktrucks used to service telephone lines. It is in really good condition and has a lot of the drawers that came with it originally. I have both of the round fenders that go with it. I originally was...
  6. T

    SUV/Van/Bed Slide Rack by Extendo Bed

    I am selling two Industrial bed slide cargo carriers from Extendo Bed. The carrying weight is 1200lbs and it will extend and lock at it's full length. It measured 62 inches long back to handles, 49.5 inches wide with latches, and 35.5 inches high. It mounts to the floor with 4 bolts. Estimated...
  7. T

    Attaching DIY camper direct to Tacoma frame.

    This camper is mounted on a tundra frame. The original builder built a steel platform/frame on the tundra frame then mounted the camper on the raised frame. https://www.expeditionportal.com/forum/threads/tunook-build-has-new-life.115353/
  8. T

    Extendo Bed Bed Slide storage system

    I am having an issue getting my pictures to load. If you want more send me a message with your email or number to text to.
  9. T

    Extendo Bed Bed Slide storage system

    Selling this Industrial bed slide from Extendo Bed. The carrying weight is 1200lbs and it will extend and lock at it's full length. It measured 62 inches long back to handles, 49.5 inches wide with latches, and 35.5 inches high. It mounts to the floor with 4 bolts. Estimated weight is about...
  10. T

    Tunook Build Has New Life

    I have not weighed it, there is not a real convenient place for me to get it weighed where I am at.
  11. T

    Tunook Build Has New Life

    Nothing new but I thought I would share that I sold the Supercharger so the Tunook will not be getting a SC. After debating it for a while I decided it just doesn't need it. The 4.7 as is handles the rig great. I was also discouraged by the need to always put premium fuel in it if...
  12. T

    Tunook Build Has New Life

    Jay I hope it helps you out somewhere along the way. I am following your build and look forward to seeing your progress.
  13. T

    Tunook Build Has New Life

    I will have to reach out to him for some advice. So the Tunook may not get the SC after all. I have found the programmer or ecu that came with the SC I have will not work with my harness. It came out of an 04 Sequoia, and the Tunook is an 01. There are some differences. I think I could make...
  14. T

    Tunook Build Has New Life

    I appreciate you bringing this up. I have read some of the posts about people breaking rods but I have also read posts where people have run them without issue. I decided it depends on how you treat the engine as to whether it will hold up or not. Toyota designed the SC to work on the 2uz, so...
  15. T

    Tunook Build Has New Life

    I am probably just going to do it. I have it might as well. The only thing that gives me second thoughts is the cost of premium gas. I filled it up today and the difference was .50 a gallon. That adds up on a long road trip. I don't think it is enough to stop me from doing it, I just need...
  16. T

    Tunook Build Has New Life

    I would agree that finding better gearing whether in the diffs or trans and transfer case would have better options to make the most improvement but it is not in the budget right now. The SC came to me in a deal I could not pass up, so that is why I am considering it. I suppose I could sell it...
  17. T

    Tunook Build Has New Life

    I had it in 4 low when I was trying to climb. The weight and trying to start from a dead stop on steep incline I am sure are contributing factors. I am sure if I took a running start I may have made it up but I prefer a slow controlled approach with the Tunook. It is a camper after all and...
  18. T

    Tunook Build Has New Life

    That is what I was hoping to here, someone who has tried something similar. How many miles did you put on it after the SC install? I have not done a compression test on the engine but the it runs strong as best I can tell. I am running 33" tires, can not recall the RPMs weight loaded is...
  19. T

    Tunook Build Has New Life

    So I have not made any changes to the Tunook since I got the new rear axle under it. I am still fidgeting with the emergency break but other than that it is working great. I am currently considering a trd supercharger for it. I already have the supercharger and was able to remove it from the...
Top