Search results

I have led strips in the mounting rails for the tent. Also installed rock light underneath the trailer and lights in each cabinet. I mounted tongue boxes over both fenders, one for power the other for additional storage

Has anyone tried swapping the hubs to a different bolt pattern. Trying to find a set for 6 x 5.5 to match a 4runner

Love that rear bumper setup. I need to do that too. I'm still working on my design for it.

I know I've been absent for a while. I finally got some issues resolved with my tongue weight. I had to completely rewire my trailer lights and move the electrical box back and mount them over the fenders.

I used the chassis as the ground on mine. I have a fuse box installed for everything I'm running

Everything will run 12vdc. When you hook up to shore power it will be through the Noco Genius. It will replace what you are using as you are using it. Any generator or shore power will be 120vac

I never noticed it having anything until I got it loaded down with gear. I havent checked the angle yet, but its definitely noticeable now. I know that a slight negative camber will help it track better. I found the cam bolts for the adjustment. And I agree about them not doing the math...

Has anyone had any camber issues with your trailer. Finally got mine fully loaded and now the tires have some negative camber

https://www.amazon.com/dp/B007CTQEG6/ref=cm_sw_r_apa_i_WqdQEbAM1JW7M Here's a link for the struts

Thanks for the page number. I had someone else tell me about the Yakima back swing also. It does look like an easy solution for the time being. I had found a kit with all the parts you would need to build your own, you supply the tubing. My only issue with that is that I dont have the equipment...

https://www.amazon.com/dp/B076FH37S2/ref=cm_sw_r_apa_i_.S6NEbW5E4H8M Here's a link for the studs too

I'm still trying to find your rear bumper build. I have to get my tongue weight down. I found another option that I'm still researching to see if it will work.

https://www.amazon.com/dp/B07VL76MVR/ref=cm_sw_r_apa_i_mI6NEbAMNJWF2 Here's a link for the bottom bracket

Yes, I purchased their light mount bracket. It's the same one they use in the kit. I bought 13mm ball studs to go into the bracket. Then found 13mm flat plates for the lower part

I bought the upper brackets from Habitat but sourced the rest from Amazon for less than half the price of Habitat's kit

Sorry it's taken so long to reply. 13mm ball end struts. 29.5" extended and 85lb lift capacity. The work perfectly to lift a CVT Mt Rainier summit and awning

That's power from the tongue box going back to the main compartment for lights and outlets

Here are some pics of the new design on the tongue

Nevermind, I just noticed mine has a different tongue all together