Search results

Hmmm what else can I stack up there? Sent from my iPhone using Tapatalk

Got it from Amazon it was 78$ Sent from my iPhone using Tapatalk

My thinking behind my approach to an overland vehicle is weight. I didn’t want to do a buildout with cabinets and shelves , water tanks, etc because I daily drive this. That means if I need a 4x8 sheet of plywood I can still fit that in there or a transfer case, transmission, v8 motor it will...

Revamped the tool storage on the drivers side. Before and after Sent from my iPhone using Tapatalk

It’s a Fuelpax and uses a Rotopax locking mount that is bolted to the door with nutcerts. It does rest on the bumper so that all the weight is not exclusively on the mount. The can just touches the corner of the body when open and the door is taught on the limit strap. Sent from my iPhone...

Exterior lighting. Sent from my iPhone using Tapatalk

It’s a simple mechanism the just pivots on is flexible enough to bend with the panel. Sent from my iPhone using Tapatalk

The rear spring pack got some attention. The standard pack I swapped in were out of a 91 public service duty fire chief sub( axle also) 6 leaves with an overload. I took out the overload and stacked 3 more leaves in for a total of 9. Gave it a small boost and some more wheel stuff upon...

Problem with putting everything on top of the truck how to get up there to strap it down and such. I struggled by with a over the tire step that was woefully short. What I needed was a collapsible ladder and that is just what I got. Here are a couple pics of how I’m storing it. Sent from my...

I have a 55 watt renology solar panel on the truck with a charge controller and 2 house batteries. My panel mount i designed lays flat for travel, extends up at an angle and tilts side to side to help track the sun. Sent from my iPhone using Tapatalk

Or the CPHB1 ? Thanks guys! Sent from my iPhone using Tapatalk

There’s a hammer on the other door. The Cresentpryhammerbar is my go to tool when someone on the trail asks me to help fix their truck. Sent from my iPhone using Tapatalk

Oh my Cresentpryhammerbar ? Sent from my iPhone using Tapatalk

Just tinted the rear windows and made wire racks for blankets and towels to fill up those spaces. I have a back up camera mounted up top so no need to have to see out those windows. Sent from my iPhone using Tapatalk

Everything is strapped down and stays in place. Sent from my iPhone using Tapatalk

On the inside I removed the passenger side rear seat( narrow one) and replaced it with a piece of 3/4 plywood. It’s bolted to the same hinge that the seat had so it pivots up to reveal storage underneath. I put our cooler there so that it is accessible at the side door. At the rear behind the...

Posted a couple pics in a couple threads but wanted to start my own. I’ve done soo much to this truck already so I’m going to do a time warp kinda deal. I’m humbled by the amount of work others have put into their rigs!! I will start of with a before and current pic. Then I’ll try to get the...

Project Junk in da Trunk Sent from my iPhone using Tapatalk

Hello I have a a small (1guy) Fab shop in Carson City NV and this is my project “Junk in da Trunk”. 87 sub ,350 efi, d60/14b, and a bunch of stuff I’ve made. Still a work in progress but it seems they all are that way. Sent from my iPhone using Tapatalk