Search results

I have a manual jack handle, a NIB rubber socket for the door holder and a pin for the jacks (I might have two). They are spares I bought for a 2004 Grandby that I sold and they new owner didn't want to come back for them. If you can use these on your 4WC let me know, you pay for shipping or...

The interface between the truck and camper are UHMW chain guides. The camper is composite fiberglass honeycomb with an aluminum exoskeleton. I would not want to try to use UHMW for the body, it is extremely hard to attach things to. You can see them in this post...

Wow, this is a killer deal. Amazing that no one has bought it yet! It will certainly take the right buyer though.

Are you still interested in selling this?

I'll take it. Let me figure out when the next time we are through HR (We live down in Salem) or maybe just have you ship it. Thanks, Ben

Hey - I am down in Salem, could these be put into the front of a 1999 F-series pickup truck? Do the arm rests come off easily? Thanks!

Sold!

Bump with price update.

Putting this back on the market after some fun adventures with family!

The frame for the cabinets is 1" 6061-T6 Aluminum, 1/8in thick it is a combination of U channel and 90 deg angle. That lets me get a lock nut behind things easier. They are 5052-H32 Aluminum that I am cutting with a circular saw to a CAD made pattern. I then bend them up on my brake and weld...

I am back with some updates! We started to install some adhesive backed vinyl tile that we thinks looks pretty good. Then some framing for the under the kids bed storage area. The whole family helped making the drawers! And my oldest is a quick learner on welding! Here is the bottom of...

That skid steer must have been expensive! Excited to see what you build next.

Pulling this off the market for a bit to use with some family.

Sent you a DM.

The truck without the camper:

More photos: Custom kids bunkbed over the couch, sleeps one kid up top and another on the roll over couch: Upgraded thermostat: Table: Hardware: 3 way refridgerator

For Sale: 2003 F-250 / 2005 Grandby Combo Asking -- SOLD -- Miles: 169,000 Location: Salem, Oregon Truck: 2003 F-250 Super Duty with Bulletproofed 6.0L Diesel XLT Trim Package and FX/4 3.73 ratio axle, limited slip Power windows, Power door locks, Power seats Cruise control, Dual air bags...

Sure, I made the foam cutter using 18 AWG nichrome wire (sourced from my local electronics hobby shop Norvac) and a (hastily) home made wood tensioning device. I used some left over surgical tubing to keep it tight as you can see on the top. That could easily be a bungie or some other stretchy...

The next on the list was getting the roof to shed water. Due to the aluminum exoskeleton and glue/foam tape, the actual roof was about 1/4" below the rim. I do not want a giant chunk of ice flying off the roof someday and wanted to decrease the potential for leaks with a pond on top of the...