Search results

You are correct on the 750 watts max via the Yeti Link, but it has it's own port under the lid of the Yeti. The HP Port on the front of the Yeti can only handle 600 watts. If using a DC to DC charger other than the Yeti Link, you can only use the HP Port, which is the limiting factor to the...

Sorry, didn't see your post. That's great info. A couple questions though. -You say you'd get 100-120 watts via the 7 pin. Since the Yeti Module can handle up to 750, what is keeping it from TRYING to get 750 and simply blowing the fuse on the 7 pin? -Second, "the 65amps (roughly 750W)"...

I believe their is a cable that connects to the integration module pre-installed in the Scout Campers, HOWEVER, that cable is connected to the vehicle's alternator/battery via the 7pin, which obviously cannot support the amperage that the Yeti Link can pull. Running your own heavy gauge wiring...

Yoho camper is just a little under 1000lbs. Loaded, it will be a little over that. I'm putting it on a DCSB Tacoma. The same truck in my Avatar. I have removed the Habitat and all the contents of my bed build-out and am waiting for the Scout later this year. I will also be removing my...

I've got the Scout Yoho on order. Similar to the Kenai layout with the U shaped dinette, but without the mudroom/bath. Everything is just a bit smaller, like the width of the camper, and the space for the Fridge. Really looking forward to it. Supposed to get it in December of this year. It...

Wife and I LOVE our CFX75DZW. BUT, we have the original one from our previous camp setup, not the new CFX3 series. Ours does not have the issue of not being able to plug the 110 and the 12v in at the same time. That's how we always had it setup and it worked flawlessly. We added the...

My last build had really tight access to snug my fridge straps down, too. But luckily I only ever removed my fridge like half a dozen times in 2 years so it wasn't a big deal. I figure it will be the same once we get our Yoho. But we will also need to put in our own mounts, as we are not...

Thanks for sharing!! Yeah, as stated above, that upper mounting point didn't exist before. Definitely looks more stout/stable. I hope they carry that over to the Olympic and Yoho, but I won't hold my breath.

Any pics of the new Jacks? Curious on how they updated them. Any idea if the new updated jacks will be used on all the campers going forward, or just the Kenai?

The Yoho I looked at had a 12V plug in the hole circled in Red below. My guess was that it ran off the 12v power from the trailer wires, as they connect right behind that panel. There was a 12v goal zero power adapter laying on the floor, i figured you could plug it into the Yeti and into this...

Still looking? My AT Habitat is for sale for interested. Located near Seattle, WA. Habitat currently on 2nd Gen Tacoma DCSB (5 f' bed). Includes mounted ARB 2500x2500 Awning and Deluxe Awning room. Posted at $9000, but open to offers...

I first want to say the Speedy Stitcher is amazing. If you ever need to do any patch work on heavy material it makes the job pretty easy. Took my wife and I about 4 hours start to finish, so it's not FAST, but it came out great! Here's the run down: As mentioned above, we previously patched...

Three calendar years since August 2019 is August 2022.

You are right about Aug 2019... but you are definitely tripping on the rest of your math.

Almost forgot to touch on the tear. We are repairing it. Properly. And it's only costing us about $70 and some time. That'll hopefully set people's minds at ease and help me keep from settling on a lower sales price! And if anyone else ever tears theirs, check this guy out. We are really...

Please read this post and you'll see where I'm coming from on my price. Yup, $8900 base price is correct. Additional $800 for the roof rack Brings that up to $9700 They charge $450 for the Nemo Habitat awning (image below of summit, but it attaches to the side of the Habitat as well)...

To all those concerned about the tear: I just received the Speedy-Stitcher from Amazon and am currently waiting on some Sunbrella Marine material to be delivered to patch the tear.

O yeah, and location is Seattle.

Hey All, I know him, I just hit him up to let him know people been looking for more info! And hey, if anyone you know is looking for a 5ft bed Habitat for a Tacoma or the like, feel free to hit me up! lol.

Not an actual pic of my rig, but i didn't have any at this good of an angle. The red line is the approximate location of the tear. It is at the peak, just to the "rear" side of the hoop. I cut a large piece of Gear Aid Tenacious Tape, like 3x8 inches and covered the the length of it and...