I used a Plano Moulding All Weather case...
I went with a Plano rifle case. I found this at Wal-Mart for under $80 IIRC. My rationale for putting it on the roof rack is to have easy access to my recovery gear. I have since removed this and went with some newer Rigid cases from Home Depot. They...
My LEDs are mounted on...
I have two places where my bars are mounted. The fairing on the roof rack and in between the hoop of my Expedition One bumper...
.
.
.
I have noticed a definitive howl when my light bar above is misaligned, but I have not had any issues since I adjusted it. There is...
Couple of things you might want to consider...
What is your payload going to be? If it is going to be a constant load, I would recommend that you upgrade from the add-a-leaf to another set of springs. Initially, I bought a Toytec Ultimate lift kit with the add-a-leaf (instead of the 1" block)...
So you are the owner of the trailer being built...
I visited VMI in May, and I got a chance to look at the shop and the goodies that they had available. I got a chance to see your frame as it was being constructed. CONGRATULATIONS! I am going to upgrade my Sherpa II for one of these. Looking...
Yes, I did find a solution to the problem. Looks like I'm going in a different direction with my trailer - I'm putting it up for sale soon. I do recommend that you call adapter kings for the hub conversion. My understanding is that the hubs are going to be two pieces due to the stud locations...
Wilson 4G booster...
I have one in my rig, and I have used it for quite some time. It does increase the signal by a significant amount. I actually bought a Verizon mifi jetpack, and it works like a charm. Now, I can use the mobile mifi or slip my cell phone in the booster cradle. Works great...
Tundra is a great platform...
D45,
.
I have a 2011 Tundra Crew Max, and I think this is a great platform to build upon. I started with a grade model and built it up myself. I don't have any buyer's remorse on this decision. Toyota reliability, plenty of room and a bomber engine...It has been a...
I have a fail safe solution...
I made a goal to not look at other bikes until I ride as many miles on it as I paid for it. I have 3 bikes - '99 Cannondale Jekyll, '09 Tricross and a 2012 Roubaix...That last Roubaix is gonna take awhile:coffee:
Regards,
BWJ
You, Sir, are spot on...
Cwvandy,
.
OK ~ thank you for your reply and kind words. Let's see now, Hinton Industries, Icon, Expedition One...Great minds think alike...:ylsmoke:
.
Regards,
.
BWJ
Noice!
Cwvandy,
.
Welcome to the EXO1 family. I have been following your thread since it was first posted. I am the guy that has the one-off tire carrier from EXO1, I had to wait 18 months for them to design & build it...I'm glad that yours turned out well ~ it looks like a great design from...
.
Ohana,
.
Likewise! Gonna miss the Hawaiian pie this year at the Thanksgiving dinner...Regards, to you and your family! Gonna PM you about the Transfer flow tank...
.
.
Thank you!
.
Regards,
.
BWJ
Daystar, ARB and ICON...
All,
.
Sorry I have not had a chance to update my rig for awhile...I have been busy with Royals postseason baseball and life in general. Anyways, here are some updates on my rig.
.
Daystar airbag cradles - I was concerned that the lift that I had was a little too tall...
Been there, done that...
Indhark,
I had a '98 4runner as a daily driver for several years (V6, automatic). The 4runner is a great platform to build upon, however, there are some things that you have to consider. My build consisted of several 'heavy duty' pieces that if I had to do over...
Amo292,
Thanks for your review. There is something to be said about driving a vehicle that is built and not bought. My 2011 Tundra was a grade package with some extras from the factory. I did not want to pay for an extra package only to replace it sooner than later. The TRD pro package is...