Search results

  1. dZak

    Australian FG84 workshop manual

    Hi, Yep I bought it and once i worked out how the Australian supplements worked it seems to be spot on. I've since sold that truck and I'm now looking for the Australian supplement for my FG439 manual if anyone has one. I've searched everywhere on line and the closest I can find is for the...
  2. dZak

    Australian FG84 workshop manual

    Found this link too. Wondering how acurate they are for Australian versions https://mitsubishifuso.manualvault.com/mitsubishi-fuso-canter-fe-fg-truck-epa04-service-manual-pdf-download/
  3. dZak

    Australian FG84 workshop manual

    Hi all, I am upgrading my FG439 to an FG84 so will be in need of a new workshop manual. I found this pdf link for the American version: http://snowing.tradebit.com/detail/279975393-2005-2007-mitsubishi-fuso-truck-fe-fg-fh Has anyone downloaded this to compare with Aussie versions or even better...
  4. dZak

    Drivetrain whine - FG434 + Entertaining Pics

    I'd be removing the rear shaft and handbrake drum and taking it for a drive in 4H on the front diff. That will eliminate the rear diff etc. just take it easy and don't stab the throttle as the front shaft etc is not as solid as the rear. It does however sound like a gearbox noise. Have your...
  5. dZak

    1993 Fuso FG Buy or Dont Buy?

    Reverse syncro is needed to hold the inserts for 1st gear from falling out as they share the same gearset. Not much use otherwise, however when Nissan brought it out in their Y60 Patrols they recon it was good for rocking yourself out of a bog. 1st syncro is good on the beach as you don't have...
  6. dZak

    The fastest my Fuso has traveled, so far

    114km/hr is mine maxed out. Hate to try and stop it though ?
  7. dZak

    1993 Fuso FG Buy or Dont Buy?

    They don't have synchro in first gear. I modified my gearbox with a Jap import parts to get synchro in 1st & reverse
  8. dZak

    FG84 dual cab dimensions

    Once again thanks for your help
  9. dZak

    FG84 dual cab dimensions

    Thank you so much for the info. Could you send me a link to the product brochure as I can only find the latest model on the net? Thanks again Dave
  10. dZak

    FG84 dual cab dimensions

    Is rear axle to end of chassis 1078mm?
  11. dZak

    FG84 dual cab dimensions

    Thanks again for the info. If the cab sizes in the previous manual you posted are correct then a crewcab is 380mm shorter from the back of the cab to the rear axle than mine :( Where do you find this info?
  12. dZak

    FG84 dual cab dimensions

    Thanks SkiFreak, That's the manual I was looking at but it only shows a FE dual cab drawing. Can anyone confirm for me that the FG dual cab wheel base is 4200mm as it shows for the FE on p.7 and that the cab dimensions are the same? Mine is a FG439C so its wheel base is only 2750 so it might be...
  13. dZak

    FG84 dual cab dimensions

    Sorry it was a typo, I edited the post. I'm looking to change to a 2010 dual cab so is that a FG84D?
  14. dZak

    FG84 dual cab dimensions

    Hi all, I am considering updating my '93 FG439 single cab to a 2008-2010 FG84 dual cab with the 4.9L. Would anyone have diagrams of the body dimensions so I can check if my motor home back will fit? I found one body builders manual on the web but it doesn't list dual cab FG. Also are the...
  15. dZak

    4d34 turbo advice needed

    So I have been reading this thread with interest as I have a FG439 with 4D34 3.9L that the previous owner fitted an aftermarket turbo to. I find my truck runs a bit hot (100Dec C) on the highway around 100km/hr and up mountain ranges if I am pushing it hard. I decided to up the boost to try and...
  16. dZak

    Canter model decoding for Australian models

    Thanks to all for the info so far. If anyone has copies of the spec sheets for vehicle dimensions as per the previous post for 93, 06 & 12 models so i can compare the differences between dual cab and single cabs it would be much appreciated. Cheers Dave
  17. dZak

    Canter model decoding for Australian models

    Did the 5 stud come with the 4.9L engine?
  18. dZak

    Canter model decoding for Australian models

    So these are the type of spec sheets I'm looking for. Are these available for 93 & 09 models? What I am thinking is the 4.9 turbo diesel with 5 stud wheel so I can swap my wheels over. I believe they went to 6 stud in 2010. Not particularly interested in vehicle with DPF or SCR either. Am I on...
  19. dZak

    Canter model decoding for Australian models

    Hi. I think I accidently deleted on of my posts. My 10/92 is a 4wd FG439C For some reason on my rego it's listed as a 93
Top