Search results

Timbren will tell your local dealer what to order if you call them with the exact dimensions once you’ve lifted the truck. The ones I ordered are different from stock fuso timbren. Call the timbren Engeneering or email them. They are helpful. depending on your truck you may want preload or...

You may want to consider new bump stops. I removed the spacer on the front bump stop as I found them too firm bump stops. Sent from my iPhone using Tapatalk

Ignore the graphics. Playing with ideas. The boxes underneath are 18 inches wide. What I like about them is all the dry storage that’s easy to access ! Between these boxes and the massive amount of storage under the bed we have several times the storage compared to the production fuso camper...

be sure to get a tire with the right load rating.. we started with Toyo' rated at 124... replaced them when we finished the build and found them overloaded.. replaced them with patriots 131 load rating.. should have bought the patriots the first time round. as ski freak said, would help to know...

hi Michel, Cameron here from ontario. there are a few of us with Fuso's. I have a 2010, friends have 2012 and 2017. the 2010 and 2012 were used trucks. before we started to build on them we dealt with the rust on the chassis. POR15 with a topcoat was the most successful method. then apply...

Please let me know if this is the wrong place to post this question. I am in search of some places to winter camp on crown land where we can xc ski and or snowshoe this winter. Truck is reasonably capable (fuso 4x4 on 37s) but it’s 13000 lbs and 11 feet tall. So we need some space and decent...

Heads up on tires and load ratings. We found that once we completed our build and loaded the truck for camping that our rear tires were beyond the load capacity of most 37s. The typical 37 12.5R17 that fit on Tony’s super single time have a load rating of 124. Which is 3500 lbs a tire. There...

Here are some pics and videos of two FGs. One is a custom build I did. The other is an Earthcruiser.

If you want some help with your truck and to get a tune done at the same time call Markus at Info@offroad-motorhomes.services. He tuned three trucks for us. So much better with some more power and torque.

The best one is blue driver. You can read all the engine codes and reset them. You can also set up any gauges you want. Depending on the model year your fuso is the data is there or it’s not. Sort of hit and miss. For a 2010 the fuel economy isn’t there. It may be there for newer models...

2010 fg140 with 150000 km on it. A few things have broken that hopefully others can learn from. fuel pump. (When replacing this be sure to retighten the injector nipples. It’s a very bad design. When you remove the fuel pump you typically remove the fuel lines going to the injectors. The...

Glad it worked on your truck. I worked directly with steinbauer for a month on a 2010 and 2017. Couldn’t get either to work reliably despite clean power and several remaps from them. It was a much better experience using Markus. Way more power and no codes. Remapped it while I had breakfast...

Sorry just seeing this now. Glad you got it sorted. Welcome to the ontario fuso club

No sorry I don’t know

Lance. Yes he is an awesome guy. Given the calls and messages I’ve gotten from other self builder and earth cruiser owners this is an area of interest. I do think sharing information helps all of us.

We have a 2010 fuso. Try a blue driver obd reader (we had similar challenges). Resetting the code only lasts a short while until you fix the issue. Blue driver can both read and It can reset codes. You can also see your fuel rail pressure on it along with many other things that won’t show up...

we successfully tuned a 2017, 2013 and 2010 FG140. In call cases HP and Torque were improved. more so on the 2010 as it has a manual transmission. in all trucks we left the DPF system intact. The 2017 was correct on first remap, 2013 took some diagnosing and a few tries to get it right, the 2010...

Heads up on idling a fuso, They clog up the DPF when they are idled a lot. You may find it’s very expensive vs a Honda generator :)

Markus tuned the first truck today and it worked perfectly :). More power and torque is just what the truck needs. Markus is also very well versed on the Fuso transmissions and only adds the power and torque that the transmission can handle. The result is a manual transmission can handle more...

I can't find anyone local. I have been talking to Markus from Schaknat, he seems like a great guy with a good solution. He can do remote ECU updates which appears to be the only way to go here in North America. I just wondered if anyone had used his services.