Search results

  1. M

    Adapter and spline count for Ford 4R75 auto trans. to NP273F TC

    I had to put this project on hold for about a year and a half while I worked on other more pressing matters. I'm just now getting back to it. Right now I am working on rebuilding/regearing front Dana super 60, and rear Sterling 10.5 to use 4.56 gears. I will start looking into the...
  2. M

    Moog CC880S coils

    I did a search and found this site: https://www.racingaspirations.com/apps/suspension-geometry-calculator/ This is probably not going to do everything you had hoped to be able to do, but it's kind of interesting. I'm going to play around with this later when I have some free time. Sent from...
  3. M

    Moog CC880S coils

    Have you tried searching for a suspension kinematics app? I'll bet someone's written one. Even if you have to pay a little bit of money for it, it might be worth it... Sent from my SM-G973U using Tapatalk
  4. M

    Moog CC880S coils

    Good point on the center pivot. I overlooked that in making my comments. I was only comparing the lengths of the radius arm between the 2WD vs. The 4WD configurations. My point was a simplified focus on the spring stiffness. The additional pivots in the center will add another plane of rotation...
  5. M

    Moog CC880S coils

    The only difference the length of the radius arm is going to make, is in how far the axles move forward and aft for a given vertical displacement. It will have no effect at all on the spring rate or spring force. Sent from my SM-G973U using Tapatalk
  6. M

    Moog CC880S coils

    I have the 5.4 L, and I bought the CC880S springs. Haven't installed them yet, but sounds like I might have to swap them to lighter springs. Thanks for the tip. By the way, Raul is right about the springs calcs. I was going to post the same thing, and then saw he had already posted it. Sent...
  7. M

    4x4 Van Resources

    Moog Coil spring data: https://www.moog-suspension-parts.com/universal_coil_springs.asp https://www.blueovaltrucks.com/tech/pdf_documents/MOOG_Coil_Springs_Spec.pdf A few popular spring numbers: Sent from my SM-G973U using Tapatalk
  8. M

    Moog CC880S coils

    Nevermind, found it: https://www.moog-suspension-parts.com/universal_coil_springs.asp https://www.blueovaltrucks.com/tech/pdf_documents/MOOG_Coil_Springs_Spec.pdf Sent from my SM-G973U using Tapatalk
  9. M

    Moog CC880S coils

    So the CC860 has been suggested for the vans with the 5.4 L V8. Can anyone explain what the difference is between that, and the CC860S? Sent from my SM-G973U using Tapatalk
  10. M

    Source for Dana super 60 master rebuild kit?

    Thank you. I also found a lot of individual parts here: https://www.dennysdriveshaft.com/c2744_dana_60_front_ford_2005_and_newer.html#c2763-DIFF_BEARINGS_and_SHIMS Sent from my SM-G973U using Tapatalk
  11. M

    Source for Dana super 60 master rebuild kit?

    Thanks for confirming MG. I figured I was okay. Are the F450 and F550 axles wider because of the DRW? Sent from my SM-G973U using Tapatalk
  12. M

    Source for Dana super 60 master rebuild kit?

    This is the kit I have. It uses a dana 60 from an '05 to '16 Ford Super duty truck: https://expovans.com/conversions/e-series/ I have front and rear axles from a 2014 F350. I know that the super 60 uses different parts than the kingpin 60. I am looking for recommendations from anyone who has...
  13. M

    Source for Dana super 60 master rebuild kit?

    How old is that article you are quoting from? Sent from my SM-G973U using Tapatalk
  14. M

    Source for Dana super 60 master rebuild kit?

    I don't think so. The MG kits (which I have) is designed to use the super 60. Sent from my SM-G973U using Tapatalk
  15. M

    Snap ring tool for front axle hubs

    This is the model I probably should have gotten: Knipex 4911A3 https://www.amazon.com/4911A3-External-Straight-Precision-Retaining/dp/B003UHUDIO Sent from my SM-G973U using Tapatalk
  16. M

    Source for Dana super 60 master rebuild kit?

    Hello all, I got a matched pair of axles out of a 2014 Ford F350 for my E350 van 4wd conversion. The front axle is a Dana super 60, the ring and pinyon looks in good shape, but I need to replace bearings. I'm looking for suggestions on a source for a master rebuild kit that includes bearings...
  17. M

    2005 Chinook front end swap

    Keep it. It looks great! Sent from my SM-G973U using Tapatalk
  18. M

    Snap ring tool for front axle hubs

    They came a day early (thank you Amazon Prime). Got it off without much trouble. The Knipex 4611A3 snap ring players worked great. The only thing I would say might be better is if they were maybe an inch longer to give me a little more leverage. I believe they have a model that fits that...
  19. M

    Snap ring tool for front axle hubs

    Yeah, I ordered the Knipex 4611A3 last night. Should be here by Thursday. I'll let you know how they work. https://amzn.to/2FwzM3g Sent from my SM-G973U using Tapatalk
  20. M

    Snap ring tool for front axle hubs

    Okay, looks like I found the answer to my own question. I'll post it here for everyone else's benefit. This article has several affordable options: https://www.jsnowcreations.com/reviews/best-snap-ring-pliers-2005-newer-ford-super-duty-hubs/ Sent from my SM-G973U using Tapatalk
Top